scm st 350 used for sale

Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I ; working condition

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

Europemill stone mill 950 H, 15 kw at 1000 rpm, v-belt pulley diameter 190-5 x 17, flat belt pulley diameter 800, n = 237 rpm, cleaned. Used condition.

Te Koop: Pall Steriel filter. Max druk 5 bar, temp. 140 Gr. Type: ECS 7006G30H4 invoer 3 "uitvoer 3" Filters value been te.

M. No.: 021104 Power 100Wat Equipment / Additional information: Electrical connection: 220-240 volts 50/60 Hz 220 VA

Sell used steel pipes DN 1000 wall thickness 14.7 mm DN 1200 wall thickness 20.0 mm DN 1400 wall thickness 20.0 mm Pipe bends DN 1200 wall thickness 25 mm - like new

Steel pressure tank, enamelled (last content: fruit juice), operating pressure: 3 bar approx. 16.000 liters used - in very good condition UNI-KINN B-Nr. 19-801 GL Tank with vaulted bottom Operating pressure: 3 bar Measurment and Weight: Diameter: approx. 2.400 mm Total length: approx. 3.700 mm Weight: approx. 3 t on the top: 1 x air vent NW 50 on the front dished bottom: 1 x manhole 400 x 300 mm swiveling 1 x flange connection NW 50 1 x flange connection NW 40 as outlet Otherweise see photos

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

ZM plate storage rack

automatic storage CASSIOLI.

Dry steam cleaner with only 208 operating hours Menikini Steam Master dry steam unit from 2015 With hose and spray nozzle Power supply 400Volt, CEE 32A Power: 19.5kW Heating time approx. 7 minutes Operating pressure approx. 10 bar Boiler temperature approx. 180 degrees 16 liter stainless steel kettle Water tank for steam generation 25 litres Detergent tank 5 litres A cleaning agent can be added to the spray nozzle in addition to the steam. The device is suitable for continuous operation. Industrial version in stainless steel Well suited for cleaning and hygienizing surfaces, e.g. in industry and the food industry. Dimensions approx. 950 x 490 x 1000mm (LxWxH). Weight approx. 120kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Storage tank 12,500 liters standing from V2A used - in very good condition Dimensions and weight: Ges. Height: 7100 mm Cyl. Height: 6080 mm Diameter: 1600 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with level indicator with manhole oval 330 x 430 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: With klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustment

Storage tank 5,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 6850 mm Cyl. Height: 6020 mm Diameter: 1080 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with tasting tap with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable

Storage tank 10,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 7500 mm Diameter: 1450 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central with threaded nozzle DN50 cylinder: with pipe pulled down with tasting tap DN25 with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable

Video station G29 from Concad, SN: 170016-0A-000.01. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in ...

Power supply: 400 VAC Volume: 78db Viewing possible - after consultation with the contact persons at Marquardt Granitküchen-Werke GmbH & Co. KG, Österfeldstraße 5-7, 99869 Emleben Data sheets on request. Contact Frank Gruhne +49 173 / 431 88 67 Frank.Gruhne[at]Marquardt-Kuechen.de Karsten Jacobs + 49 151/ 25016969 B7npdnnly8 Karsten.Jacobs[at]Marquardt granite

Stone catcher for potato peeling plant of Dornow

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Equipments: Size: B65xT70xH160 cm Power supply: 380 V wire sizes: round wire No. 30 to 21 Issue size: up to 25 mm Speed: max. 170 stitches/min Block-/Sattelheftung Weight: approx .: 250 kg stapling speed: up to 170 staples / min as is

Type: NT 620 To work with boneless meat Loading width: 620 mm Product height: 130÷220 mm Steaker head: 700 steaker needles (2 х 350) El.connection: 400/440 V, 50/60 Hz El.connection value: 8,0 kW ; 17 А Machine dimension in mm: Length: approx. 2200 Width: approx. 1250 Height: approx. 2200

- 1 head stitiching machine - with the existing accessories

Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker

dia. of draw-in collets: 4 - 24 mm max. radius to grind: 12 mm grinding range: 4 - 24 mm grinding wheel-diameter: 100 mm total power requirement: 0,4 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1 x 0,6 x 0,4 m Electric 380 Volt: Base with drawer: Diverse collets: Draw-off device: Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.

Stainless steel container Capacity 250 litres Cylindrical stainless steel container standing on feet single-walled, hinged lid Agitator from above

Capacity: 160 t Sheet length: 1200 mm Sheet width: 400 mm Width between standards: 400 mm Capacity Kg:           160000 Distance between column:850mm Table Length:          1200mm Table Width:           400mm Table Height:          400mm Ram stroke:            500mm Power:                 11kW Length:                4200mm Width:                 1500mm Height:                1500mm Weight:                6250kg

With Steuer Hot Foil Stamping System, Fully Automatic, Speed Control, Central Lubrication

6 Stations, Cover Feeder, Stiching Unit, Trimmer, Rima Stacker Delivery, Complete with Standard Accessories

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cylcles/Hour, 6 Feeder Stations, 1x Cover Feeder, Stiching Unit with 2 Stiching Heads, Three Knife Trimmer, with Rima System Stacker Delivery

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

AVAILABLE FROM THE END OF AUGUST 2023 3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-100a - Gathering tower VAC-100m - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-100a / Horizon VAC-100m / VAC-100m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1,86kW - ...

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-60a (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-60a / Horizon VAC-60m / VAC-60m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50 ...

Stüpfelmaschine mit Magazin, Fabr. W & P, 5 rows, mobile

Stüpfelmaschine mit Magazin, Fabr. W & P, 5 rows, mobile

Stahl Folding Machine Dimensions 70x100 Model Year: 1987 4 Bags 4 Axes 3 of the axes are in working condition 1 of them requires maintenance

Bosch Genuine Starter - New; G9508 - G9512 for Liebherr machines. We have a total of 6 in stock. Price per piece. ( New goods ) Sale Exclusively without warranty and guarantee. Price on request

We sell 2 x IBM Storwize AllFlash 5030e, each 36 x 8TB 7.2k NL disks In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished condition ...

We sell 1.) 2 x IBM DS8884, 2831-984 Storage Systems each consisting of 3 Frames, Dual controller 12 shelves, each 24 x 1.8TB/10k SAS Disks 2 shelves, each 24 x 3.8TB SSDs 2.) 2 x IBM V7000 Storwize, 2076-524 each with 4 controllers 22 shelves, each with 24 x 1.8 TB SAS disks 4 x IBM Storwize V5000, 2077-3122 each with 60 x 10TB NL disks 1 shelf with 12 x 10 TB NL disks 1 x IBM 2077-AF3 shelf with 24 x 1.6 TB SSD 3.) 2 x HDS VSP G1000 each consisting of 24 shelves with 1,6TB/1k SAS 32 x 10TB FMD In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems menti ...

Stripe breaking device IMA

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

We can offer you all spare parts for the following machine: SADDLE STITCHER STAHL-ST100 // Age: 1995 Spare parts: 1) Double feeder ST-100 Station I 2) Double feeder ST-100 Station II 3) Double feeder ST-100 Station III 4) Stitching unit with 2 normal Hohner stitching heads and 4 ring eyelets stitching heads 5) Trimmer 6) Sheet metal & cladding 7) Compressors + motors

Equipments: suitable for any kind of booklet maker / saddle stitcher 2x Hohner 48/5 S stitching heads

Automatic traysealer, for preformed containers of last generation, very fast, efficient and with 2 sets of mold. Used equipment completely revised and reconditioned. From the manufacturer CFS, model STAR 2 HS. Built entirely in stainless steel. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing molds, 1st for containers 1/2GN 2 trays per sealing last, Dimensions of the welding area, for the molding of 2 containers at the same time (1/2GN): 260 x 320 mm. Sealing area measures 700 x 300mm. 2nd for containers 1/4GN 5 trays per sealing last. Welding area dimensions, for molding 5 contain ...

Blade diameter: 900 mm 5 mm thick incl. 2 extra saw blades

- max. 14.000 cycles / hour - Format untrimmed max. 32 x 48 cm - Product thickness max 12 mm - 6 Stations 4 x Vertical feeder DVU450 2 x Horizontal feeder DHU450 - 1 Cover feeder - Intermediate unit with control cabinet - Stitcher with 4 x standard stitching heads (45N14) and 4 x eyeletting stitching heads (5026) - Trimmer with center knife device - compensating stacker CHA

Step regulator, electronic control -Manufacturer: ELREHA -Type: STG-1903 -Type: STG1903 -Number: 2x control cards available -Price: per piece -Dimensions: 70/195/H130 mm -Weight: 0.9 kg

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Profiling system: replacement stations for ID26309 -Profiling machine: solid version, used for slats/blinds production -Bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm -Weight: 702kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg