scm m3 used for sale

Used sander SCM Sandya 5 mod. 5 RCS 110 useful working width mm 1100 I° tape: helical steel calibrator roller with height adjustment of the group II° belt: combined 60 sh sander roller unit and automatic buffer Nr.. 1 motor kw 11 flat positioner with pedals and height control nonium pneumatic belt centering new tow mat with two-speed motor

Description: Max. panel width 900 mm Max forward speed 48 mt/min Number of shafts 1 Motor Power 18.5 KW Max. cutting height 110 mm Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Tensioner for the TV console scm Morbidelli Clamping range 6 to 45mm as good as new, tested, in working order Price per piece

MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

Key data: 520

SCM thickness planer S 52 Product name: Thickness planing machine Type: S52 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: Condition: Used Technical details: - Work table size: 520 x 850 mm - Working width: 520 mm - Chip removal max.: 8 mm - Passage height min.: 3 mm - maximum planing height: 230 mm - Knife shaft diameter: 120 mm - Planer shaft with 4 pieces of Tersa knife - Sectional pressure roller - Knife shaft speed: 4,500 rpm - Feed speed for thickness planing: 6 -10 - 13 - 17 m/min - Table lift motorized and fine adjustment by hand - numerical display of the table height - Deliverable pull-out roller in the thickness table - 2 Aigner mounting rails (1x input table, 1x output table) - Weight: 600 kg Engine data: - Voltage: 380 V - Current: 12 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,900 rpm The machine was completely refurbished  ...

SCM FRIGO SW1X 750 VSBT/S Brand:SCM FRIGO Type:SW1X 750 VSBT/S Stock number:M22-4539 Cooling capacity:50.0 kW Application:Cooling Number of fans:4 Refrigerant:R449A Refrigerant Content:70.0 kg Voltage:400 Volts Power consumption: 53.2 kW Motor power:85 kW Dimensions:5320 x 2200 x 2310 mm Weight:2,600 kg Year:2015 Number in stock:1 piece(s) Price: On request Description: A young low temperature water/glycol chiller, equipped with Bitzer screw compressor HSN7471/75, heat recovery and a complete control box with the entire control of the chiller. Mentioned capacity is at water/glycol +45/55°C and an inlet/outlet of -27/-32°C. Visit also our website: used-refrigeration

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

Key data: 410 mm, 2600 mm, 4 St.

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Description: SCM Record 110 Al Prisma CNC Machine Specifications: Brand: SCM Model: Record 110 Al Prisma Year of Construction: 2010 Number of Axes: 5 Drilling Unit: Yes Groove Saw: Yes Tool Magazine: Yes Pods, Rails, and Clamps: Yes Safety Mats: Yes x-motion: 3,060 mm, y-motion: 1,240 mm, Approx. Onsite Dimension. (l x w x h): 6,200 x 3,800 x 2,400 mm, weight approx.: 4,000 kg

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

ROUTER type SCM R9

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

calibrating sanding machine SCM SANDYA 16S - 135 second hand machine carpet in rubber max. working width mm. 1350 machine composed by 2 belts : 1° belt : roller in rubber diam. mm.200 . shore 80 2° belt : combined roller in rubber diam. mm.160 . shore 35 + electronic pad belts size mm. 2620 x 1370 motor power Hp 20 volt. 380/50

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

SCM si x 32A Circular sawing machines Both sides saw blade tilting to 46° Be Mule shoe 1200 x 650 mm Saw table cast 1000 x 685 mm Carriage 3200 x 360 mm Format sections 3200 mm RIP fence cutting width 1270 mm Max cutting height + 90 °: 136 mm Max cutting height + 46 ° /-46 °: 97/60 mm Before scoring unit Motor 400V 50 Hz 7kW Main sawblade speed: 4000 1/m Dust nozzle diameter: 120 mm and 80 mm And switch on the carriage 2-ashes controlled height/Pan Programmable, electronic display G & PIECES 5508780 Optional carriage 2600 mm G & PIECES 5508775

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

CIRULAR SAW type SCM SI 400 EP NEW machine . prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - manual, semiautomatic and automatic mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50 YEAR 2022

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

SCM Ergon, year of construction 2000 composed of two floors that can work individually or in unison. X 4100 Y 2100 Z 250 Machine available after October 2023

Cnc machining center SCM IBERICA ROUTOMAT 2P The machine is located in Spain.

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Vertical wood milling machine (router) make SCM type T 120 CMachine -No: 1170480, built in 1980Table size: 1100 x 900 mmTable height: 850 mmvertical adjustment of the spindle: 185 mmSpindle diameter: 35 mm5 spindle speeds: 2900 - 10000 rpm.Max. Diameter of tenon cutting disc up to: 400 mmDrive power: 7.5 hpWeight approx.: 610 kgOutside dimensions approx. 1120 x 900 x 850 mmWith- mot. Roll feedused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!

Code: N0750 Brand: SCM Model: CLASS SI 400 EP - CE Standard Electronic-programmed circular saw with tilting blade - CE Standard Technical data Blade diameter mm 400 Cutting height mm 140 Programmed blade lifting and tilting Scoring unit Main blade motor Hp 9,5 Scoring unit motor Hp 1,7 Carriage length mm 3800 Start/stop buttons integrated in the sliding carriage Electronic position reader for parallel guide with manual movement

SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...

Green SCM brand multiblade sold used but with virtually new motor and gears as it was purchased new but never operated.

Wrapping saw Manufacturer and type : SCM Z32 Condition : Used Year of manufacture : 2001 Power input : 10 kW Max. Cutting height : 90 mm Max. Material width : 900 mm Material length (min-max) : 3200 - 3200 m Number of discs : 2 pcs Saw blade diameter : 200 - 350 mm Feed roller stroke : Electric design

Bench milling machine Wood milling machine Carpentry milling machine SCM Type: T120C 5 speeds adjustable 2900/4400/6600/7800/10 000 rpm Table dimensions approx. 110 x 90 cm Milling fence with fine adjustment Milling fence can be rotated on the machine table. max. tool diameter 325 mm incl. milling shaft 30 mm suitable feeders can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

SCM machining center model RECORD 130TV: - axis travel X=4330 - Y=1720 - Z=300mm - useful working range 3830 x 1245mm - piece passage 280mm - worktop with 6 TV bars - laser for positioning aid - supplied with 12 suction cups and 12 clamps for TV bars - 3 loading aids - rubbish drain mat - 100 mc/h vacuum pump - automatic lubrication - optimized and centralized suction - electronic control with PC-OFFICE, in Windows system and XILOG PLUS interface - dimensions installed with protections mt 8,4 x 5,9 Operator groups: - vertical spindle type POWER2000 liquid cooled, motor KW 11 with inverter, HSK63F connection, with 4th vector rotating axis, served by: Dual RAPID tool changer at 12 + 12 positions rear tool room with 12 + 12 positions - UNIVERSAL K horizontal milling unit with 2 outputs (tip + blade), adjustable 0-90° , KW 3 motor Machine according to CE standards No ...

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

Milling spindle scm HSK63F 7,5KW "round" 18,000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!

Milling spindle scm HSK63F Prism KT-2 11/9 20 63F The spare part is completely overhauled. New bearing ceramic, balanced, sensor adjusted, etc. Warranty 6 months Delivery in exchange, exchange price!

Milling spindle scm HSK63F 6,6KW "round" 24.000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!

E- Spindle scm ISO30 RTN INVER STC with Vector 7,5KW The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, etc. taken from a Morbidelli Author 504 STC Warranty 6 months

Milling spindle scm HSK63F 6,6KW "flange" 24.000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!

E- Spindle scm ISO30 RTN INVER STC without Vector 7,5KW The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, etc. taken from a Morbidelli Author 503 STC Warranty 6 months

Milling spindle scm HSK63F 8,5KW E1-NL 24.000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!

E-spindle scm ISO30 RTN INVER with Vector 7,5KW The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, etc. taken from a Morbidelli Author 510 Warranty 6 months

Milling spindle scm HSK63F Prism 11kW "E-SPINDLE HSK63F 11KW X5+R110AL PRISMA" The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, sensors adjusted, etc. Warranty 6 months Delivery in exchange, exchange price!

E-spindle scm ISO30 RTN LD 7,5KW with Zero Speed Sensor The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, etc. Warranty 6 months Delivery in exchange, exchange price!

Horizontal drill head scm Record 100/110/130 Sx

Wide-belt sander SCM Sandya Uno Main engine 7.5kw Feed motor 0.3kw Two grinding units Working width 900mm Pneumatic oscillation Spotted shoe Dimensions 1420mm 1790mm 1590mm Weight 1050kg

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5