scm group used for sale

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Key data: 520

SCM thickness planer S 52 Product name: Thickness planing machine Type: S52 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: Condition: Used Technical details: - Work table size: 520 x 850 mm - Working width: 520 mm - Chip removal max.: 8 mm - Passage height min.: 3 mm - maximum planing height: 230 mm - Knife shaft diameter: 120 mm - Planer shaft with 4 pieces of Tersa knife - Sectional pressure roller - Knife shaft speed: 4,500 rpm - Feed speed for thickness planing: 6 -10 - 13 - 17 m/min - Table lift motorized and fine adjustment by hand - numerical display of the table height - Deliverable pull-out roller in the thickness table - 2 Aigner mounting rails (1x input table, 1x output table) - Weight: 600 kg Engine data: - Voltage: 380 V - Current: 12 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,900 rpm The machine was completely refurbished  ...

Planer SCM F520 CE Working width 520mm 4kw motor 4-knife shaft Traditional knives Hydraulic raising and lowering of the worktop Main sampler adjustable at an angle up to 45 Length of table tops 3000mm CE Certificate

Compact deburring and finishing machine. Dry deburring and sanitizing of metal surfaces. Burr removal. Removal of oxides from edges and surface treatment. Technical parameters: 400V, 71A. Weight: 2200Kg.

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

Power main motor: 7 kW Cutting length: 3,300 mm Cutting depth: 3,200 mm Cutting height: 60 mm Saw blade protrusion: 67 mm Collets: 5 pieces Main saw blade: 320 mm Scoring saw blade: 160 mm Saw carriage feed flow: 0-80 m/min Saw carriage feed return: 0-80 m/min Program slide feed flow: 0-25 m/min Program slide feed return: 0-50 m/min Air cushion tables: 3 Scoring: 1.3 kW Control: PC/PLC with M258 unit Software: Wincut 12 Lift table dimensions: 3,300 x 1,850 mm Lifting table with motorized loading rollers for double-sided loading Cutting optimization program "Cutty" Quick clamping system of the saw blades with a pneumatic blocking device Laser straightening light at kerf Power supply: 400 V, 3 Ph, PE Weight approx. 4,700 kg

I sell a fully equipped edge banding machine SCM Olimpic S3000, built in 2011: Configuration: Input stop servo motor adjustable Pneumatically adjustable joint milling machines Edge banding with preheating tank Material pressure zone servo motor adjustable Cross-cut saws pneumatically adjustable Strong milling machines can be adjusted manually Pneumatically adjustable radius milling top + bottom Round unit 4-motor pneumatically adjustable Radius puller blade R2 can be switched off pneumatically Surface of the drawing blade Polishing brushes Hot-air blower Separator injection front and rear STARTOUCH control system Control panel Barcode reader Working height servo motor adjustable Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 12m/min. PUR glue possible. Second glue tank brand new included. Only 6,153 meters glued! Machine practically ...

Technical data on request. For self-dismantling and collection.

table dim. approx. 530x900 mm; throughput 5, 8, 12 and 18 meters/min.; maximum removal 8 mm (ATTENTION! Piping not included!)

v.v. tenoning machine carriage with crosscut guide; length approx. 660 mm; "Aigner" milling guides and feeding device; incl. flexible suction hose and various accessories (ATTENTION! Piping not included!)

Code: 0094 Brand: SCM Model: RECORD 110/S - CE Standard CNC working centre for doors, windows, furniture, arches and various - CE Standard - Year 2006 Technical data: X axis stroke mm 2990 - Speed 60 M/S Y axis stroke mm 1720 - Speed 45 M/S Z axis stroke mm 400 - Speed 25 M/S Working range X mm 3500 Working range Y mm 1815 Workpiece passage mm 155 Electrospindle Kw 7,5 18000 rpm Tool attachment HSK 63 Automatic tool changer with 12-position "RAPID 12" UNIVERSAL K2 power unit fixed for horizontal working Bar table with suction cups : N° 6 TV tables with displays N° 2 workpiece loading aid lifters Vacuum pump 250 m³/h (5,5 Kw) Conveyor on electrospindle to eliminate chipboards and dust XYLOG operator interface CNC managed by PC with WINDOWS interface Suction N° 2 mouths diameter mm 150 Compressed air 7/8 bar Machine overall dimensions: Length mm 3710 - Widt ...

Key data: 410 mm, 2600 mm, 4 St.

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

X-travel: 3680mm, y-travel: 2040mm, z-travel: 1000mm, number of drilling spindles: 9, number of tool slots: 32, weight: 6.5t, operational hours counter: ca. 33,000h, the machine is slightly damaged.

Length: 2600mm, width: 685mm, height: 1000mm, weight: 840kg.

Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible.

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.

Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg

Manufacturer: SCM, Type: M 3, Year: 2001, Cutting widht mm: 300, Working hight mm: 120, Power engine kW: 44, Year :1993

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Manufacturer: SCM , Year: ca.1995, Control: hand, Number of profile spindle: 1, Tracer: yes, Max. operating height mm: 50, Spindle travel range total mm: 110, Number of milling spindles: 1, Milling spindle kW: ca.1,5, Milling engine rpm: 10000/20000, Grid depth setting: yes, Tracer pin in the table: yes, Number of tables: 1, Table size in mm: 7700 X 900, FREE TEXT: Tischub per Handrad 200 mm/pneumatisch Fusspedal, Year :ca.1995

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Working width: 520 mm Working height: 240 mm Motor output: 7 kW Number of knives: 4 St. Feed speed: 5/8/12/16 m/min. weight of the machine ca.: ca. 500 kg : Tersa : Ja Dust suction hood: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM Superset XL four-sided planer Working width 230mm Working height 130mm Number of spindles: 7 Spindle system Bottom 9kw Rights 9kw Left 9kw Mountain 9kw Bottom 9kw Rights 7.2kw Left 7.2kw Spindles adjustable in two planes Spindle diameter 40mm Feed speed adjustable on the inverter Drive on cardan shafts Pneumatic clamps

Key data: 500 mm, 2600 mm, 4 St.

SPECIFICATIONS: Width of work tables mm: 500 Length of work tables mm: 2,600 Number of blades: 4 Diameter mm 120 Installed capacity KW: 4,0

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Technical description: - number of motors up/30kW,25kW/down/30kW,25kW/ - Entrance to the roller table Yes - Roller table output yes - Blowers Yes -adjustable carpet speed 3.6-20 m/min - Digital setpoint display Yes -suction ports 8x260 mm, 2x160 mm -adjustment of the workpiece grinding setting on each aggregate

Key data: 45 °, 3200 mm, 1270 mm

Used sliding table saw Int. Art. Ref. m3495 Manufacturer: SCM Type SI 300n max. saw blade 315 mm Year of construction 2002 With scoring machine Carriage length 3.20 m Weight approx. 1,050 kg Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carrie ...

Four-sided planing and roll forming machine SCM COMPACT P max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle 4 kW Motor power vertical spindles 5.5 kW Motor power upper horizontal spindle 4 kW Profile depth 20 mm Infeed table length 2500 mm Motorized height adjustment of the feed system Feed element before dressing Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION 1 set of planing tools for FREE

jointer planer, dresser, flat planer, planer, jointer -Manufacturer: SCM surface planer type F4L -Working width: 400 mm -Number of knives: 4 pieces -Chip removal: 0 - 10 mm -Motor: 3 kW -Planer knife speed: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 695kg

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Labeling machine for containers adaptable to industrial lines or manual loading. Variable data printing Ideal for automatic or manual loading. Machine produced by SCM Costruzioni Macchine Italia - Line Lat model, year 1999, Voltage 380-50 Hz - 3 phases TECHNICAL FEATURES: - WEIGHT 600 Kg mm. - ABSORBED POWER 1,5 Kw. - POWER SUPPLY 380 + N Volt 50Hz - AIR CONSUMPTION 15 l./min - AIR PRESSURE 4.5 bar - OVERALL surface 2500x870 mm - HEIGHT max 1800 mm - VARIABLE DATA MARKER Thermal transfer Ribbon - Ribbon foil transfer system Operation description: The linear labeling machine with self-adhesive group LINE LAT LAP-LAT can be inserted in automatic packaging systems for containers of any type and shape. The containers are spaced before entering the machine by centering rollers placed on the sides of the conveyor belt. They are then guided by a counter belt which has the task o ...

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -

SPECIFICATIONS: Max. gluing height mm: 55 (polyurethane glue) Workpiece length min. mm: 250 Aggregates: Headjoints/Milling Cutters/Cutters Rounding unit/edge cutter Edge trimmer

Working width: 180 mm; Working height: 110 mm; Working shafts: 4; Spindle arrangement: bottom, right, left, top; Motor power shaft bottom & top: 7.5 kW; Motor power shaft right & left: 7.5 kW; Adjustment shaft down: -; Adjustment shaft right: -; Adjustment shaft left: handwheel; Adjustment of the upper shaft: handwheel; Planer heads bottom & top: Centrolock; Planer heads left and right: Centrolock combined with roll forming option; Feed speed: 2; Feed roller pressure: Spring; Current consumption: 32.8 A; Extraction connection: Machine Length: Machine Width: Weight:

SCM sliding table saw model SI400e: – 3200mm aluminium trolley – motorized lifting of the blade unit, with digital indicator – motorized tilting of the blade unit, with digital indicator – Rip fence with manual adjustment – main blade D=400mm – 3 blade rotation speeds, 3000-4000-5000rpm – independent engraver with external adjustment – engraver rotation speed 8500rpm Machine according to CE standards

SCM Sintex NTE four-sided planer Working width 23 – 180mm Working height 6 – 105mm Number of spindles: 4 Spindle system Bottom 7.5kw Rights 7.5kw Left Mountain Spindle speed 6000r.p.m Spindle diameter 35mm Electric up-down and width adjustment of heads Feed rate: 6-12 m/min CE Certified Extraction pipes 1x150mm 2x120mm Machine weight: about 1000kg

Code: 0567 Brand: SCM Model: MULTIFLEX C Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 Technical data Automatic carriage with chipbreaker End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions of assembled machine: mm 2050 x 3900 x 2000 h Overall dimensions for transport: mm 2050 x 2600 x 2000 h Weight kg 2200

5-axis CNC machining center SCM Record 110 AL TVN Prisma Travel of the X-Y-Z axes: 3500 x 1815 x 440 mm Working area: 3110 x 1250 mm Prisma K: Milling unit with 5 interpolating axes Electrospindle with tool holder HSK F 63 Drilling unit controlled by the inverter of the electrospindle 12 independent vertical spindles (7 on the right and 5 on the left) 6 horizontal spindles (2+2 "X" right/left along, 1+1 "Y" right/left along) Rapid 16 car. Tool change for 16 tools, travelling in X-axis TVN workbench / upholstered / high-voltage vacuum DIGITAL 2 independent vacuum fields for machining in the pendulum process Vacuum pump with 250 m³/h capacity (5.5 kW) CNC control NUM, operating system Windows XP with 17" LCD display User Interface XILOG Plus CNC controlled central lubrication additional extras included Positioning aid 4 pcs. Lifting aid for loading and unloading large work ...

Working width: 410 mm Length of the planing table: 2.200 mm Number of knives: 5 St. Motor output: 5 kW weight of the machine ca.: ca. 411 kg : Tersa : Ja Dust suction hood: 120 mm turning speeds: 5.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

SCM F410 planer Working width 410 Length of worktops 2610mm 4 knife shaft Shaft with traditional knives Angled fence 3kw power main motor Power supply: 380V Extraction nozzle 110mm Weight 700kg

Key data: 500 mm, 2620 mm, 4 St.

SPECIFICATIONS: Width of slabs mm: 500 Length mm: 2620 Roller with 4 blades Voltage: 380 volts

A description of the machine: RECORD 125 NESTING CNC machining centre with loading and unloading for milling, cutting, clearing, drilling, etc. The machine for sale has recently been taken out of service. It is in good working order. A twin machine can be seen on site, only the spindle is different between the two machines. Model RECORD 125 NESTING Power supply 400V - 50/60 Hz X-Y-Z axis travel 3700x1720x400mm X-Y-Z axis speed up to 80-55-22m/mn Real part passage (light) 335(310)mm OSAI system Water-cooled ELECTROMANDRIN power supply Electromandrel 6.6kW 24000rpm (no angular gear heads) Magasin Rapide12 - HSK 63 12-position automatic tool magazine 2 Becker 250m3 dry vane vacuum pumps Multiple chuck drilling head Movable control panel NUM1040PC control unit with Xilog Plus and Telesolve 3 safety mats Mesh protection perimeter Automatic slide lubrication Our in-stoc ...

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

SCM lab 300p 5-fold combi Universal Multiple Combination Aluminium sliding slide 3 Tersa planer knife shaft Trimming length 1600mm max. saw blade diameter 315mm with scoring Swivel saw blade Dressing width 300mm Dressing table length 1300mm Thickness table dimension 300 x 450mm min./max. thickness height: 3/220mm Motor 50Hz 4kW 400V max. milling tool diameter 160mm Spindle speed: 3600/7500/10,000 rpm Spindle diameter: 30mm Weight 430kg G&STÜ-5500314

Table extension, extendable support, finely adjustable milling fence, stop adjustment via handwheel, clockwise/counterclockwise rotation---------- Technical Data ----------table size: 2,530x730 mm, work table height: 910 mm, spindle diameter: 30 mm, effective milling spindle length: 130 mm, max. milling cutter diameter: 300 mm, max. retractable milling cutter diameter: 300 mm, height adjustment: 180 mm, speeds: 3000/4,500/6,000/8,000/10,000 rpm, Motor: 7.5 kW, Suction nozzle: 120 mm, Suction nozzle bottom: 120 mm, Dimensions (LxWxH): 2,620x1,000x1,170 mm Sold as is, without technical inspection

SCM drilling machine model TOP29: - 29-spindle head with quick coupling - Adjustable drilling 0-90° from upper vertical to horizontal - Motorized movement of the drilling head - 6-position drilling depth revolver - 4 pneumatic clamps to hold the pieces - complete with aluminium rails AVAILABILITY FROM APRIL 2024