scissor used for sale

table diameter: 4520 mm table load: 12000 t swivelling range: 110 Grad total power requirement: 44 kW weight of the machine ca.: / t required space: / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 ---------------------------------------------------------------------- ---- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH  ...

Description mobile height-adjustable Gura scissor roller conveyor 1200-425 2KUX from year 2009 Scissor roller conveyors are used in all areas of general cargo transport in operation. Especially when a permanently mounted system is not desired, this mobile variant is used. Own logistics structures can thus be optimally adapted and expanded as desired. The tracks are individually adjustable in length and height, at the same time curves up to 180 can be formed. – gloss-galvanized version – web top edge from 720 – 1150 mm height-adjustable. – For conveyed goods up to 425 mm – Axle distance with extended web 150 mm. – Rollers ( 50 mm) ball bearing on 8 mm axes – End stop at the end of the roll Number of support feet 3 pieces (+one extension) Web length 1600 – 5500 mm Load capacity/support foot distance 100 kg Roll material Plastic Rolls per axle 2 pieces Roller design Plastic

Manufacturer: Mc Intyre Knife length: 508 mm Opening of measurement: 250 mm Cutting capacity: 120 tons Round iron ST 37: 67 mm diameter Number of strokes at 1/4 opening: 100 per minute Number of strokes at full opening: 20 per minute Dimensions ( L x W x H ): 1650 x 915 x 1490 mm Weight: 1143 kg Drive: 7.5 kw / 400 V Operation: foot pedal Alligator scissors JMC 500 HD The JMC 500 HD has a hydraulic holder. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket.

Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Safety grilles for working platforms, climbers, scissor lifts, aerial work platforms, lifting platforms, passenger lifts, safety grilles, wire mesh protective grilles, safety rolling grilles -Security grid: Wire mesh, for scissor lifts or other use -Wire Thickness: 1.5mm -4 rolls: width 2550 mm -Lengths price per meter: 45 EUR net/meter -2 rolls: width 2010 mm -Lengths price per meter: 40 EUR net/meter -Total dimensions: 2850/720/H660 mm -Total weight: 450 kg

Anthon panel sizing saw, year of construction 2000/01 Type Porta composed of: Roller conveyor, Longitudinal saw, Chipper left/right, Angle transfer, Parcel pusher, Drawer arms, Pusher tracks, Transfer table, Cross saws, Chipper left, Angle transfer, Roller conveyor Grenzebach Plattenstapeanlage Year of construction 1990/91 composed of: Roller conveyor, scissor lift, storage device, stacking device, chain conveyor on lifting platform, scissor lift, pallet insertion device, tongs transfer swivel device, chain conveyor, weighing device Waste disposal plant Holtec Vibrating Conveyor DS 500 - 11m Gössling Flat Belt Conveyors with Carriers Diemer ASC 50-25 LP-S, belt conveyor DB-A, secondary shredder DNZ 100-100

Key data: 3048 mm

Ref.Nr. 00810 Name of the plant Bending Center Manufacturer: Salvagnini Model P4 2525 Year of construction 2006 Description according to order confirmation at the time of purchase Scissor table Feeder destacker Bending center Programmable hold-down device Upper bending beam Lower bending tray Control unit Control for auxiliary bending cheeks CLA tool kit Swivel device for auxiliary tools Option for cutting and spreading profiles Dispensing device / buffer for panels Water-air cooling unit Scissor table Maximum dimensions of stackable PCBs 3048x1524mm Maximum height of stackable package incl. pallet 350 mm Usable load capacity 5000 kg Vertical lifting distance 550mm RVA - Feeder-Destacker Max. dimensions of metal sheet 3048x1524mm

Materials: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET Working width 1300 mm Parent Roll Diameter 780 mm Final Roll Diameter 560 mm Maximum mother reel weight 400 kg Finished Roll Weight/Вес готовой бобины (kg) 200 kg Duble Unwinder Unwinder with shaft Rewinder with shaft Number shafts 2 Thickness range (microns) 12-250 Speed (m/min) 500 m/min Brake type With magnet Knife type/Тип ножа (circular, razor, scissor) Razor Slitting Width (mm) 35-130 Unwinder Roll Core Diameter 75 mm Rewinder Roll Core Diameter 75 mm Rewinder Tension (kN) 0-1000 Pressure 6 Bar Control system Voltage 3X380V Frequency 50 HZ Installed Power 55 Kw

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design Price: on request 4 color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Price: on request Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual Price: on request cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift tab ...

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design 4-color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift table - shaker Offset printing machine Manufacturer: H ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/40. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

Electronic Scissor Lift Fabr. TREPEL Type M-Boy 4Machine -No: 30706872, built in 1985Load capacity: 500 kgOperating pressure max.:160 barTable size: 710 x 600 mmHeight retracted: 470 mmMax. Extension height: 920 mmOperating pressure: 160 barDrive power: 1.1 kWExternal dimensions retracted: 650 x 900 x 470 mmPower connection: 380 V / 50 HzWith- Remote control with 3.0 m cable- freely installable limit switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Scissor knife for table scissors . Shear knife. Knives.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0406 Payload: 200 kg Load capacity platform pull-out: 100 kg Platform dimensions: 1.34 x 0.76 m Platform extendable + 0.55 m Transport dimensions 1.34 m x 0.785 m Height: 2.07 m Railings folded down Height: 1.67 m Weight approx.: 790 Kg Working height: 6.5 m Platform height: 4.5m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 120 Ah integrated charger 24 V/ 15 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offers  ...

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0608LDN Payload: 230 kg Load capacity platform pull-out: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport dimensions 2.06 m x 0.99 m Height: 2,17m Railings folded down Height: 1.8 m Weight approx.: 1710 Kg Working height: 8.7 m Platform height: 6.7 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 300 Ah integrated charger 24 V/ 30 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with appropriate ramps with car trailer. Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquir ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0608 LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.28 m Handrails folded down Height:1.75 m Weight approx.: 2800 Kg Working height: 8 m Platform height: 6 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 10 / 12 / and 14m working height, with and without support. In addition, the machine is also available with bright non-marking chains. For further data please inquire. The machine can be viewed at our warehouse a ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0810LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.40 m Handrails folded down Height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 8 / 12 / and 14m working height, with and without support. In addition, the machine is also available with normal black chains. For further data please inquire. The machine can be viewed at our warehouse and tes ...

Scissor lift terrain - working platform with crawler chassis. FRONTEQ Type: FS0507T Payload: 200 kg Platform dimensions: 125 x 0.7m Platform extendable + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Handrails folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German operating instructions included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offe ...

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

Scissor lift terrain - working platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Payload: 230 kg Load capacity platform pull-out: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport dimensions 2.27 m x 0.96 m Height: 2.14 m Railings folded down Height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Retractable supports bright non-marking chains. Gradeability up to: 30° Overload shutdown: Drive via battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German operating instructions included 2 years manufacturer's warranty The machine is also available without support. For further dates, delivery time and availability please inquire. Depending on availability, the machine can be inspected at our warehouse  ...

Used Hosokawa Alpine Rotoplex RO 36/60 cutting mill. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 36/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycli ...

Off-road scissor lift - work platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport Dimensions: 2.27 m x 0.96 m Height: 2.14 m Railing folded down height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Supports can be folded in bright non-marking chains. Climbing ability up to: 30° Overload cut-off: Powered by battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and conditions on ...

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a ter ...

Off-road scissor lift - work platform with crawler chassis and automatic support. Type: CFPT 0810LDS Load capacity: 450 kg Load capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport Dimensions: 2.78 m x 1.58 m Height: 2.40 m Railing folded down height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Climbing ability up to: 30° Overload cut-off: Powered by battery 48 V / 210 Ah integrated charger 48 V/ 25 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and details on request. The machine is also available with 8 / 12 / and 14m working h ...

scissor lift; Off-road platform with crawler chassis Type: CFPT0608LDN Load capacity: 230 kg Load capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport Dimensions: 2.06 m x 0.99 m Height: 2,17m Railing folded down height: 1.8 m Weight approx.: 1710 Kg Working height: 8 m Platform height: 6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 300 Ah integrated charger 24 V/ 30 A German instruction manual included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with car trailer with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing i ...

SCISSOR LIFT TABLE New Type: TA48S-3Tlt2 3 ton 2400x1200 hydraulic

SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions

1. Roller conveyor - Length 6500mm - Web width 395mm - 14 rolls - Roll width 300mm, with a 20mm shaft 2. Roller conveyor - Length 4000mm - Web width 395mm - 8 wheels - Roll width 300mm, with a 20mm shaft General information about roller conveyors In the photo there is a hydraulic lifting height adjustment to adjust the height of the roller conveyor, this was a special solution for a customer. We can provide the scissor feet, but this system is delivered without a hydraulic unit. You can reuse the upper part of the roller conveyor, which is made as a frame, and you only have to make and mount support feet at the bottom, then you have a stable roller conveyor.

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor lift manufacturer WMW type HT 20500Masch. -No: 16 built in 1990Load capacity: 2000 kgTable size: 2500 x 1250 mmLifting height: 1600 mmHeight: 440 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Scissor lift table make SAX LIFT A / S type IL 1000 SB-STechnical specifications:Load: 1000 kgUseful stroke: 1050 mmConstruction height: 250 mmMax. Height: 1300 mmLifting time: 34 secSize of the usable area L x W: 2800 x 1000 mmDrive power: 1.1 kWWeight approx: 300 kgWith- Hand switch with up / down- emergency stop- safety bar- railings- Platform with checker plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Height adjustable roller conveyor make TRANSLYFT type TLH 2500Machine -No: 000290 Year 1990Roller conveyor width: 400 mmRoller conveyor length: 6000 mmSupport table size: 800 x 6000 mmLoad capacity: 2.5 tDimensions L x W x H: 6000 x 800 x 1000 mmWith- 4 built-in scissor lift tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

ATLAS scissor lift table, lifting capacity 4 t German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm height of the folded table 450 mm pump motor power 4 kW table weight 1500 kg

Salvagnini S4.40 punching machine with shear system  CNC control: Salvagnini SysCon Specifications: Working area: 4064x 1803 mm Max dimension of the sheet: 4064x 1803 mm Min dimensions of the sheet: 370x 300 mm Min and Max Thickness: 0.5 -5 according to the material used Maximum weight of the sheet: no limit Grippers for automatic positioning of the blehe: 13x Technology: Multi-press punching head with hydraulic drive Time for the replacement of the punching tool: 0 sec (each tool is ready for use= Simulation Possibility of activating two or more punching units Weight : 19000 kg Machine dimensions: 9967x6426 mm Power 63kW Air supply: 5 bar Punching Productivity & Cutting Productivity  Maximum material thickness: Alumumuim with breaking strength 200M/mm²: 5.0 mm Steel with breaking strength 410N/mm² : 3.5 mm Stainless steel with breaking strength 680 N/mm²:  ...

Haulotte Compact 10 scissor lift Working height 10,14m Platform length max:3,22m Machine width:1.2m Payload 450Kg

Magni Diesel scissor lift 4x4 with support Payload 454kg Working height 12m New machine

Magni ES1012AC Scissor Lift New machine! Working height 10m Payload 450KG

Jungheinrich scissor lift truck, load capacity up to 1000 kg

wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...