We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,591 used machines on RESALE, but how to find them? Machine Search
used
; Gross weight [kg]: 3320; Inspection Date: 2024-03-18; Maximum lift capacity [kg]: 230
used
own weight: 6.8ton; Including pallet parts
used
Hand lever scissors VEB Scherenbau Nossen type ScDH10 Blade length: 180 mm Sheet thickness: max. 10 mm Flat material: 50x15 mm 4-edge solid material: 22x22 mm Round steel: 24 mm Angle steel: 60x7mm T-steel: 60x7mm on mobile base Weight : approx. 150 kg good condition; used
used
There are two identical lifting tables available, stroke: 1310mm, load: 7.5t, length: 3000mm, width: 2850mm, height: 430mm, weight: 2.9t.
used
; Gross weight [kg]: 4400; Maximum lift capacity [kg]: 300
used
: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 € : 408 € : 5 mm : 1200 mm : 2,2+0,75 kW : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hand lever scissors Pagus 1 BR/6 sheet thickness: 4 mm Blade length: 180 mm Dimensions: 400x100x1500 year of construction 1995
used
Hand lever scissors with underframe Pagus sheet thickness: 4 mm Knife length: 210 mm Base: Working surface: 540 x 540 x 16 mm Working height: 770 mm used, tested ! Dimensions: 580 x 580 x 2100 mm Dimensions(disassembled): 580 x 580 x 800 mm
used
Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table with hand lever scissors PAGUS working surface: 1500 x 1000 mm plate thickness approx. 50 mm height: 820 mm < br /> Hand lever scissors PEDDINGHAUS 4 BR 8 Snow capacity: 8 mm flat steel used, checked! Top condition ! Dimensions: 1500 x 1000 x 1200 mm
used
Lever scissors with base, lever cutting machine, paper scissors PAGUS 600 mm Material width: max. 600 mm Knife length: 650 mm Working surface left: 830 x 640 mm Working surface right: 530 x 70 mm, approx. 400 mm extendable Working height: 740 mm Groove width: 14 mm used, checked ! Dimensions: 1750 x 800 x 1200 mm
used
Hand lever scissors NOSSENER MASCHINENBAU ScDH 5 Knife length: 210 mm Cutting capacity: sheet metal: 5 mm flat bar: 7 mm Mounting foot: 405 x 125 mm used, tested ! Dimensions: 460 x 125 x 1240 mm
used
Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons
used
Veneer scissors, veneer punch, fine cutting machine, fine cutting scissors -Transfer in current condition as seen -Cutting length: 4750 mm -Motor manufacturer: Demag -Type: Motor 24/14K4 -Type: Gearbox 92D -Motor power: 5 kW -Dimensions: 5700/1300/H1900 mm -Weight: approx. 4500 kg
used
Veneer scissors, veneer punch, fine cutting machine, fine cutting scissors, veneer package scissors -Manufacturer: Josting, veneer scissors type EFS 3200 -Cutting width: 3200 mm -Stop: max. 725 mm -Insertion height: approx. 80 mm -Hydraulic unit: Power 4 KW -Dimensions: 4320/1600/H1800 mm -Weight: 3160 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, profile steel scissors 3-fold combined type Profi 500 -Pressure force: 50 tons -Applications: punching, shearing, cutting, notching -Dimensions: 1240/720/H1350 mm -Weight: 1206 kg
used
hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic scissors / spreader -Type: S / 90 -Nominal pressure: 630 bar -Dimensions: 510/170 / H150 mm -Weight: 12.5 kg
used
hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg
used
Currently without electric circuit
used
sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Load capacity: 500 kg Table dimensions: 850 x 500 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm, weight approx.: 100 kg
used
hydraulische lifting table dimensions of the table (single): 1100 x 1450 mm height min/max: 400 mm / 2000 mm maximum charge: 1000 kg
used
Load capacity: 19000 kg Location: Cologne
used
Article number: 01-99-038 Manufacturer: Rod Shears Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.2000 L x W x H: approx. 1000x800x1500mm Weight: approx. 400kg Shear performance in steel: Round: approx. Ø28mm/1 1/4 inches Square: approx. 28mm/1 1/4 inches Flat: approx. 60x16mm/2 1/4 x 5/8 inches Power supply: 230 & 380 volts Accessories Hydraulic power unit Mobile on castors Other accessories on request Price and other technical data on request
used
Description: Carrying capacity 1500 kg Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 700 mm, weight approx.: 265 kg
used
Description: extendable platform Maximum platform length 2540mm non-marking tires safety rails rollover alarm platform height 5.8m forklift slots 230V battery model DC24V/AH Max slope 30% Manual emergency lowering system Platform swing gate Extended platform Foldable platform Multi-disc wet brake Manual brake release Pothole protection Non-marking tires AC power supply to platform Tilt alarm Buzzer Safety brackets Charging indicator Forklift pockets Diagnostic system Maintenance-free battery Dual flashing light Approx. Onsite Dimension. (l x w x h): 1,930 x 770 x 2,130 mm, weight approx.: 1,500 kg
used
Description: Stroke height 1000 mm Table 1000 x 500 mm Carrying capacity 500 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 530 x 1,150 mm, weight approx.: 70 kg
used
Zmg Zs0607WL 2.2mB 0.81mH 1.86Weight 1530kgWorking height 7.80mElectrically operatedYear of construction 2020Almost no operating hours!CE certificates availableFunctionalVAT identifiable
used
Description: Technical data: Round steel 27 mm Square steel -- mm Angle steel 100 x 10 mm Flat steel 10 mm Punching pressure 40 t weight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 1,800 mm
used
Description: max. load capacity 1000 kg max. lifting height 800 mm Built-in charger Fork length approx. 1150 mm Approx. Onsite Dimension. (l x w x h): 1,700 x 600 x 1,300 mm, weight approx.: 200 kg
used
Description: maximum load capacity 1000 kg , maximum lifting height 800 mm with charger Fork length approx. 1170 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 600 x 1,300 mm, weight approx.: 170 kg
used
Description: Nominal load capacity 1000/800 kg Center of gravity distance 600 mm Lifting height 800 mm Built-in charger Fork length 1140 mm Attention: lifting cylinder requires service Approx. Onsite Dimension. (l x w x h): 1,800 x 600 x 1,300 mm, weight approx.: 170 kg
used
Description: maximum load capacity 1000 kg , maximum lifting height 800 mm Fork length 1150 mm , without charger Approx. Onsite Dimension. (l x w x h): 1,800 x 6 x 1,300 mm, weight approx.: 170 kg
used
Description: max. load capacity 1000 kg built-in charger lift height 800 mm Fork length 1150 mm Approx. Onsite Dimension. (l x w x h): 1,700 x 600 x 1,300 mm, weight approx.: 200 kg
used
Description: max. load capacity 1000 kg Stroke height max. 820 mm Battery voltage 12 V With charger  , Attention: automatic stacking function must be checked Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,600 mm, weight approx.: 180 kg
used
Description: maximum lifting height approx. 810 mm , maximum load capacity 1000 kg , Battery voltage 12 V , with charger , Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,500 mm, weight approx.: 150 kg
used
Description: Serial number 10039, voltage 380 volts, maximum cutting height 60 mm, maximum cutting length 800 mm, with table support surface left and right, without CE certificate, with spare blade , cutting length: 800 mm, Approx. Onsite Dimension. (l x w x h): 5,400 x 1,600 x 2,000 mm, weight approx.: 600 kg
used
Description: maximum load capacity 1000 kg maximum lifting height 800 mm Fork length 1160 mm defective impeller Approx. Onsite Dimension. (l x w x h): 1,600 x 600 x 1,200 mm, weight approx.: 140 kg
used
Description: Nominal load capacity 1000/800 kg Center of gravity distance 600 mm Built-in charger Battery voltage 12 V Fork length approx. 1150 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 700 x 1,300 mm, weight approx.: 170 kg
used
Description: serial number: ,1200023125 working hours: approx. 322 hrs. max. load: 2 persons / ,230 kg max. platform height: 5700 mm  , please also have a look at the videos of this machine serial number: 1,200,023,125, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 2,000 mm, weight approx.: 1,500 kg
used
Impact scissors Karl Krause "ROBUST" Ma. No. : 3142 Cutting width: 112 cm Table: 72 x 114 cm 2 adjustable stops Knives sharpened Weight: 360 KG Tested and cleaned / Functional
used
Tool change trolley, lifting table trolley, pallet truck, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift -Retracted height: 755 mm -Height extended: 1105 mm -Max. Stroke: 350 mm -Number: 1x tool change trolley available -Price: per piece -Transport dimensions: 890/580/H755 mm -Own weight: 170 kg
used
Scissor lift table, scissor lift table, scissor lift, scissor lift -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Retracted dimension: 450 mm -Measure extended: 600 mm -Attention stroke only: max. 150 mm -without control -Number: 7x lifting tables available -Price: per piece -Own weight: 700 kg/piece
new
Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg
new
Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg
used
Working platform, man basket, safety cage, scissor lift, aerial work platform, cherry picker, lifting platform, scissor lift, scissor lift, work platform aerial work platform, platform -Manufacturer: GSL, work platform with extendable additional platform from aerial work platform -Platform load: max. 450 kg -Additional platform: load extended max. 150 kg -Dimensions: retracted 3060/1150/H1300 mm -Transport dimension: 3060/1150/H640 mm -Weight: 430 kg
used
Working platform, scissor lift, aerial work platform, cherry picker, lifting platform, scissor lift, scissor lift, drive axle aerial work platform, travel drive, drive axle -Manufacturer: GSL, travel drive axles left and right from aerial work platform -Type: KM 400 and HM 400 -Bolt circle: Ø 145 mm M14 -Dimensions: see photos -Delivery/price: complete -Dimensions: 630/370/H510 mm respectively -Weight: 52 kg/pc.
used
Work platform, scissor lift, aerial work platform, cherry picker, lifting platform, scissor lift, scissor lift, travel drive axle lift work platform, travel drive, drive axle aerial -Manufacturer: GSL, travel drive axle for aerial work platform with solid rubber wheel -Solid rubber wheel: Continental CSE-Robust SC 15 5.00-8 -Dimension: 610/320/H400 mm -Weight: 57 kg