scissor lift used for sale

; Gross weight [kg]: 2150; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 2134; Inspection Date: 2024-04-12; Amount of previous owners: 1; Lift height[mm]: 630; Maximum lift capacity [kg]: 550

; Gross weight [kg]: 2760; Rear tyres remaining: 100; Front tyres remaining: 100; Inspection Date: 2023-09-29; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 3320; Inspection Date: 2024-03-18; Maximum lift capacity [kg]: 230

There are two identical lifting tables available, stroke: 1310mm, load: 7.5t, length: 3000mm, width: 2850mm, height: 430mm, weight: 2.9t.

; Gross weight [kg]: 4400; Maximum lift capacity [kg]: 300

Scissor roller conveyor, scissor conveyor PAGUS 83 - 190 cm 48 cm Roll width height 70 - 105 cm Dimensions: 950 x 650 x 800 mm

Description: Load capacity: 500 kg Table dimensions: 850 x 500 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm, weight approx.: 100 kg

hydraulische lifting table dimensions of the table (single): 1100 x 1450 mm height min/max: 400 mm / 2000 mm maximum charge: 1000 kg

Load capacity: 19000 kg Location: Cologne

Description: Carrying capacity 1500 kg Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 700 mm, weight approx.: 265 kg

Description: extendable platform Maximum platform length 2540mm non-marking tires safety rails rollover alarm platform height 5.8m forklift slots 230V battery model DC24V/AH Max slope 30% Manual emergency lowering system Platform swing gate Extended platform Foldable platform Multi-disc wet brake Manual brake release Pothole protection Non-marking tires AC power supply to platform Tilt alarm Buzzer Safety brackets Charging indicator Forklift pockets Diagnostic system Maintenance-free battery Dual flashing light Approx. Onsite Dimension. (l x w x h): 1,930 x 770 x 2,130 mm, weight approx.: 1,500 kg

Description: Stroke height 1000 mm Table 1000 x 500 mm Carrying capacity 500 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 530 x 1,150 mm, weight approx.: 70 kg

Zmg Zs0607WL 2.2mB 0.81mH 1.86Weight 1530kgWorking height 7.80mElectrically operatedYear of construction 2020Almost no operating hours!CE certificates availableFunctionalVAT identifiable

Description: max. load capacity 1000 kg max. lifting height 800 mm Built-in charger Fork length approx. 1150 mm Approx. Onsite Dimension. (l x w x h): 1,700 x 600 x 1,300 mm, weight approx.: 200 kg

Description: maximum load capacity 1000 kg , maximum lifting height 800 mm with charger Fork length approx. 1170 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 600 x 1,300 mm, weight approx.: 170 kg

Description: Nominal load capacity 1000/800 kg Center of gravity distance 600 mm Lifting height 800 mm Built-in charger Fork length 1140 mm Attention: lifting cylinder requires service Approx. Onsite Dimension. (l x w x h): 1,800 x 600 x 1,300 mm, weight approx.: 170 kg

Description: maximum load capacity 1000 kg , maximum lifting height 800 mm Fork length 1150 mm , without charger Approx. Onsite Dimension. (l x w x h): 1,800 x 6 x 1,300 mm, weight approx.: 170 kg

Description: max. load capacity 1000 kg built-in charger lift height 800 mm Fork length 1150 mm Approx. Onsite Dimension. (l x w x h): 1,700 x 600 x 1,300 mm, weight approx.: 200 kg

Description: max. load capacity 1000 kg Stroke height max. 820 mm Battery voltage 12 V With charger  , Attention: automatic stacking function must be checked Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,600 mm, weight approx.: 180 kg

Description: maximum lifting height approx. 810 mm , maximum load capacity 1000 kg , Battery voltage 12 V , with charger , Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,500 mm, weight approx.: 150 kg

Description: maximum load capacity 1000 kg maximum lifting height 800 mm Fork length 1160 mm defective impeller Approx. Onsite Dimension. (l x w x h): 1,600 x 600 x 1,200 mm, weight approx.: 140 kg

Description: Nominal load capacity 1000/800 kg Center of gravity distance 600 mm Built-in charger Battery voltage 12 V Fork length approx. 1150 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 700 x 1,300 mm, weight approx.: 170 kg

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 760 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 760mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price: â?¬7750 / piece Delivery possible. Please specify your postal code and directly ask.

Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 610 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 610mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price 6920 / piece Delivery possible. Please specify your postal code and directly ask. Offer is valid until stocks last.

Combined cut-out machine and sheet metal scissors with base ; Very good

Table scissors Wieger 6 / 30 year of construction: 1991 to 6 mm Immediately available

Max cutting length: 2540 mm Max cutting rod: 4 mm steel Moto. Rear stop up to 750 mm side stop weight: 4000 kg

Veneer Guillotine Brand: Josting Model: EFS 2800 Cutting length: 2800 mm Two-handed control Rear stop with handwheel adjustment

Scissor-bubtisch with driven roller conveyor - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Built: 2013 Type: Roller conveyor / scissor stroke table Length of roller conveyor: unknown Wide element approx. 75cm Roll length: approx. 68cm Roll width: approx. 5cm Element height: approx. 15cm Lifting height: currently approx. 78.5cm Engine: SEW Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

properties: Used Schrenrollenbahn Condition: used Material: Steel (galvanized) Incl. SEW motors (9 drive units) Incl. 10 feet, height adjustable Speed adjustable Expertly dismantled and packaged specifications Scissor roller conveyor of the manufacturer Schmid Systemtechnik GmbH Year of construction: 2018 Conveying width: 600mm Material: Steel Total length extended: 9.000mm Total length retracted: 4.950mm Conveying width: 1.000mm Roll diameter: 50 mm Head: 820mm to 1040mm Number of rolls: 91 pieces Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage ...

Nominal width: 750 mm Total length extended: 6,250 mm Total length inserted: 2,190 mm Conveyor roller, undivided, galvanized steel: 40 x 1.5 mm Roll division extended: 125 mm Smallest length of conveyed goods: 250 mm Number of double supports: Profile steel: 6 pieces Working height: 740 - 1,040 mm Swivel wheels End stop, lowerable (optional) at the acceptance end Partly with fixed plates diameter 125 x 36 mm Load capacity/linear meter 11 kg Scissors, profiled steel galvanized Paint supports: black matt

sheet width: 1350 mm plate thickness: 5 mm cutting angle: 2,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1,93 x 2,2 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 2,64 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 510 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2,5 kg dimensions of the machine ca.: 2,1 x 1,2 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: 1,35 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 10 mm distance between columns: 3300 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7500 € : 154.5 € : 2 mm : 700 mm : 1,1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

sheet width: 2050 mm plate thickness: 4 mm table-size: 530 x 830 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2,63 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 5 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1350 kg dimensions of the machine ca.: 2,13 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1.550 mm plate thickness: 3 mm cutting angle: 2,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2,14 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mm plate thickness: 4 mm cutting angle: 1,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 3,13 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1350 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2150 kg dimensions of the machine ca.: 2,2 x 1,93 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1.350 mm plate thickness: 3 mm cutting angle: 2,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1350 kg dimensions of the machine ca.: 2,6 x 1,94 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 6 mm cutting angle: 1,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,7 kW weight of the machine ca.: 3100 kg dimensions of the machine ca.: 2,2 x 2,63 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.