135,955 used machines on RESALE, but how to find them? Machine Search
Lifting height 800mm, Auction-ID: A1-48959-515
Includes chain hoist without the rail Auction-ID: A1-48474-153
Lifting height 800mm, Auction-ID: A1-48959-516
Lifting height 800mm, Auction-ID: A1-48959-511
Lifting height 800mm, Auction-ID: A1-48959-514
Stapellift / Stack Lift Polar SFA-3 Baujahr / Year 2001 - Serial-No. 7177002 Tragfähigkeit / Carrying apacity max. 1000kg Lichtschranke / Light barrier Sehr guter Zustand / Very good condition
Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle
Lifting height 800mm, Auction-ID: A1-48959-512
Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight
Lifting height 800mm, Auction-ID: A1-48959-513
Auction-ID: A7-49773-399
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
Equipped with a Volkswagen 4-cylinder diesel engine Auction-ID: A1-48474-28
Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with
A Linde electric forklift truck in need of repair is offered. Weight: 2250kg. The battery is in good condition and the forklift truck is operational. The lift control is defective and the sideshift has been fixed in position. An on-site inspection is possible.
\" General Description Curtain-side rigid cargo truck manufactured by Iveco , model Eurocargo 160-280 . Configured for commercial freight and distribution transport with curtain-sided body and rear hydraulic tail lift. Technical Details Manufacturer: Iveco Model: Eurocargo 160-280 Machine type: Curtain-side cargo truck First registration: 27/07/2017 VIN: ZCFA71MM202668639 Fuel: Diesel Power: 207 kW (approx. 280 HP) Emission standard: Euro VI Axle configuration: 4×2 Transmission: Manual Gross vehicle weight: 16,000 kg Odometer: 820,022 km Operating hours: 13,169 h Curtain-side / tarpaulin cargo body Dhollandia DHLSU11 hydraulic tail lift Tail lift capacity: 2,000 kg Tail lift platform height: 2,650 mm Tail lift load centre: 1,000 mm Condition Used commercial condition with wear consistent with age and mileage. Equipped with a new cardan shaft including new beari ...
E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used
Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.
Vemag vacuum filling machine with lifter for 200 liter meat bins, model: 2000 DC, type: 132, number: 1320154-1, 380 V, 3 Ph, 50 Hz, 42 A, dimensions: 2200 mm x 1300 mm x 2400 mm.
Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic
Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
Lift table HANDY type 1250E - No 2 Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Total weight with support: 100 KG
K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg
Lifting kneader KEMPER, type: F 75 ASL -overhauled- - for 75 kg flour or 120kg dough - incl. 2 tank cars - Incl. dust cover - Condition: technically very good, ready for immediate use -Refurbished - 6 months warranty Visits and test runs are possible by arrangement.
Used DIOSNA Lifting Kneader, Type: S 35 2G -In Bakery Condition- - for 35 kg dough or 20 kg flour - 2 speeds - Foot switch to turn on -Protective - Machine runs very smoothly - Technically tested and cleaned - Machine repainted - Kneading arm and kettle made of stainless steel Inspection and test run are of course possible by arrangement.
Used DIOSNA Lifting Kneader, Type: S 20 3G -In Bakery Condition- - for 20 kg dough - 3 courses - Rewired - Engine Newly Mounted - New V-belt - Machine repainted - Kneading arm and kettle in stainless steel - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.
carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the cente ...
length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
Truck attachment Drum grab Suitable for 2 x 200 L steel corrugated/steel lid drums Description firm grip even on uneven floors Sturdy, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Fast, easy installation on the forklift Automatic fixation when lifting the drum Automatic release of the clamp when setting down Safe pick-up of steel corrugated and clamping ring drums Height adjustable Specifications Surface: Hot-dip galvanized Application: Lifting/transporting steel drums Width outside [mm] 1050 Depth outside [mm] 1080 Exterior height [mm] 975 Fork pocket spacing [mm] 730 Fork Bags W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION of CONFORMITY Weight [kg] 110 More items - new and used - can be found in our shop! International shipping ...
Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.
2 pcs. Lifting beams Load capacity 57.5 t each. Total length each 6000 mm with 4 shackles each
used
Lifting kneader Diosna S 35 Dough machine with sophisticated technology! with stainless steel kettle and kneading arm for max. 35 kg dough 2 gears with timer Machine mobile small space requirement! Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Machine platform E-Box for more safety Service Packages Maintenance contract Ask about our delivery service! Instruction & Commissioning
Lifting kneader Diosna S 35 Dough machine with sophisticated technology! with stainless steel kettle and kneading arm 2 courses Machine mobile small space requirement! Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Machine platform E-Box for more safety Service Packages Maintenance contract Ask about our delivery service! Instruction & Commissioning
maximum number of results exceeded
please refine your search
250 € 
