135,974 used machines on RESALE, but how to find them? Machine Search
Consisting of two pieces of load capacity each: 500 kg Auction-ID: A7-49089-289
consisting of three pieces of load capacity each: 250 kg Auction-ID: A7-49089-294
Lifting spindle drive Framo - Drive technology 3 units in stock Stroke 1,500 mm Adjustment force 4,000 N Lifting speed 5 mm/s -New- -Unit price- Original price today approx. € 6.300,00 net per piece
used lifting tipper HK 600 (table / tabletop device), suitable for Diosna 160 and 200 kneading machines, height 140 cm
The fully automated high-bay warehouses with state-of-the-art Technology - available from 2.5 to 15 meters high - in 500mm increments, available from stock! Measure your ceiling height, 25mm distance to the ceiling is sufficient for the installation of the storage tower. The alternative to used storage systems (Kardex, Hänel, Modula and Megamat) Feel free to take a look at our product variety, We look forward to your inquiry Delivery possible within 48 hours after receipt of payment! Optionally with app connection! The high-density bearing at 25-millimeter intervals creates the largest capacities in a small footprint.
Working height: 20.660mm, load capacity: 225kg, weight: 6,1t, the battery should be replaced, the vehicle has been stationary for approx. 3 years. An on-site inspection is possible.
I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...
Lifting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible.
Table lifting tipper approx. 600kg load capacity with dough slide shield Bottom 110cm Height approx. 130cm - Tested and cleaned
WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM S. No.: 5950798 Equipment / Additional information: With heating Also very interesting for the textile industry
Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run
Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.
Lifting kneader extendable Kemper Model: F 100 ASL for max. 160 kg dough/TA 160 (rye mixed bread dough) Stainless steel kettle 240 litres Dough machine with flour dust hood according to HACCP 2 tank cars Stainless steel kneading arm 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty + Spare parts service Option: Delivery & Floor Fastening Maintenance contract E-Box Service Package Instruction & Commissioning Many more lifting kneaders in stock!
Diosna dough machine Model: S 20 Stainless steel boiler for max. 20 kg dough Flour dust hood with protective circuit 3 gears with timer Kneading arm newly coated Machine mobile with locking foot DGUV V3 tested E-system NEW Connection 400V, 3 kW, 16A-CEE plug Used machine overhauled 3 months warranty Option: Service Package E-Box Maintenance contract Instruction & Commissioning Many more lifting kneaders in stock!
Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm
S. No.: J21032541-1/354 Equipment / Additional information: Load: 2500 kg
Industriële trailer die met een vorkheftruck verplaatst moet worden. Kind off: industrial trailer Number of axles: 1 axle Loading capacity: 30 ton Length: 10 meter Breadth: 1300 mm
Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995
Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999
Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995
Manufacturer: Yale, Type: GLP30VX V2395, Year: 2010, Fork length in mm: 1200, Lifting power kg: 3000, Lifting hight approx. mm: 3505, Total power kW: 38, Wight approx. kg: 4250, Year :2010
Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990
Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004
Industriële trailer die met een vorkheftruck verplaatst moet worden. Kind off: industrial trailer Number of axles: 1 axle Loading capacity: 30 ton Length: 10 meter Breadth: 1300 mm
Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002
Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,
Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992
Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.
table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 2000 kg : 190 mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. weight of the machine ca.: 0,28 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
11x Seco Lifiting Tables 2000kg (2021) Auction-ID: A1-48805-229
maximum number of results exceeded
please refine your search
150 € 
