schuler n used for sale

GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...

Key data: 3 mm, 1050 mm

Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

CNC Vertical Machining Center HERMLE C 50 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel : X 1000 Y 1100 Z 750 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table Ø 1150 mm x 900 mm Vertical tool changer with 60 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle Blow-off device IKZ 80 bar with paper belt filter Scraper belt conveyor Coolant Setup Sealing air for scales, bed flushing Oil mist extraction Manual Cab Door , Automatic Cab Roof Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

Key data: 1270 mm, 508 mm, 635 mm

Haas VF-4DHE CNC Vertical Machining Center CNC Control Haas CNC Table size 1,321 x 457 mm Table load 1,588 kg Number of pallets: 1 x X-axis travel 1,270 mm Y-axis travel 508 mm Travel Z-axis 635 mm Spindle holder MAS BT40 Spindle speed 40 - 8,100 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel distances : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 630 mm Vertical tool changer with 32 magazine positions ( HSK 63 ) Linear Axis Standard Version Blowing air d.d. spindle center Blow-off device IKZ 40 bar , Paper belt filter for IKZ Scraper belt conveyor Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. iTNC manual control module 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Oil mist extraction Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

CNC Vertical - Machining Center HERMLE C 1200 V With track control Heidenhain iTNC 530 Year of Make: 2009 Travel : X 1200 Y 900 Z 500 Speed range : 20 – 10,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1260 mm x 800 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) IKZ 40 bar Blow-off device Scraper belt conveyor Rotating transparent window Coolant Setup Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Control cabinet cooling unit ( RITTAL) Oil mist extraction Various HSK 63 tool holders equipped with tools Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.

Key data: 6195 mm, 2935 mm, 565 mm

TECHNICAL DATA: Working Range: X: 4600 mm Y: 2200 Maximum travel: X: 6195 mm Y: 2935 mm Z: 565 mm 5 axes Nesting table 01 Turret tool magazine with 18 slots 01 self-propelled tool changer 10 stops: stroke 150 mm 01 Vacuum pump: 250 m³ 01 Vacuum pump: 500 m³ 01 Laser Pointer Pen Drilling unit (6 kW): 18 spindles for vertical drilling (11+2 X-axis - 6 Y-axis) 02 Double-Sided Spindles for Horizontal Drilling – X-Axis 01 Double-Sided Spindles for Horizontal Drilling – Y-Axis 01 Saw blade unit – X-axis Electrospindle unit (13 kW): Equipped with HSK mount - liquid-cooled Software: CAMPUS V7 PLUS

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas  ...

Non-returnable glass bottling line SIDEL capacity: 40.000 bph by 250 ml glass bottles year of manufacturing: 2003 bottle formats: 0,25 ltr., 0,33 ltr., 0,5 ltr. Filling product: Beer, CSD or other beverages The line was commissioned in 2003, has been well maintained. The line was in production until January 2026. The line is consisting of: Pallet transport for depalletizer Sidel / SIG Simonazzi / GEBO Bulk depalletizer Sidel / SIG Simonazzi / GEBO for bulk pallets 1.200 x 1.000 mm Pallet transport for palletizer Sidel / SIG Simonazzi Tray and/or Carton palletizer Sidel / SIG Simonazzi linear machine capacity: 350 - 660 layers/h Pallet shrinkwrapper Sidel / SIG Simonazzi / MSK capacity: 55 pallets/h Pallet labeller Sidel / SIG Simonazzi / Logopak capacity: 120 labels/h Carton erector Sidel /SIG Simonazzi capacit: 3.600 cartons/h Basket er ...

Biesse cnc controlled nesting machining center Rover 35 XL Version 2  Electric milling spindle A Electric milling spindle B Drilling unit 28 drilling spindles  Working area 6 x 1.55 (1.65) m

workpiece diameter: mm grinding length: mm clamping length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg

The machine is in good technical condition, after prior agreement possible to test. 2 workstation machining center. Workstation 1: 3 axes. Workstation 2: 5 axes. Magazine: 22 tools. Heidenhein control system. Fully functional. type: DBZ X: 2 x 750 (+ 4/5 axis) Y: 500 Z: 600 Worktable 2 × (1000 × 500 mm), 3 T-slots Tool clamping SK 40 DIN 69871 A Renishaw probe adapter on both workstations

The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.

The machine is in good technical condition, after prior agreement it is possible to test it. 3 axis machining center, X-axis repaired, bearing replacement, Y-axis bearing replacement. New Y-axis measurement

Offer 25496 Hydr.- Univ. - Two-station – sheet metal notching machine + hole punch Technical data: Station 1. Notching device - Cutting length up to 220 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Infinitely variable cutting angle adjustment by handwheel 30 - 140 ° - Pneumatic clamping - Locking stops left + right - Table support surface 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2. Kanteinrichtung oder Lochstanzeinrichtung - Max. pressure capacity 200 kN - Working speed 0 to 10 mm/sec - Bending device up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive 400 V / 4 kW - E – Footswitch - Space requirement approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads

General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement

General Manufacturer: Chiron Type: DZ 08 W Magnum high speed Control: Siemens 840D Year of Make: 2015 Travel: X 450 mm Y 270 mm Z 310 mm Rapid traverse X/Y/Z: 75 m/min Working spindle Speed: 18,000 rpm Tool holder: HSK 40-A Tool/movement Tool changer: 16-speed Dimensions and weight Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Workpiece changing table IKZ Coolant System with Belt Filter Knoll Chip conveyor Oil mist extraction Probes Blum Laser Measurement

GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System  ...

8x NEW TONERS FOR CANON THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES ARE AVAILABLE FOR PURCHASE: 2x Canon imagePRESS Toner T01 Yellow 2x Canon imagePRESS Toner T01 Magenta 2x Canon imagePRESS Toner T01 Cyan 2x Canon imagePRESS Toner T01 Black

Socad 300 x 8 mm (fixed angle) Capacity : 300 x 8 mm Fixed angle -- variable angle: fixed Electric motor (power): 7,5 HP Length : 1200 mm Depht : 900 mm Height: 1500 mm

Comaca 225 x 3 mm (fixed angle) Capacity : 225 x 3 mm Strokes/min: 80 str/min Fixed angle -- variable angle: fixed angled Workspace: 1050 x 700 mm Electric motor (power): 1,5 kW

CNC machining center MAKA Type SC 20 T Tandem table version Year of construction 2000 3-axis machining Workpiece cube dimension Maximum length 1500 mm Maximum width 1500 mm (per table) Maximum height 240 mm Maximum travel distances approx. X 4300 mm x Y 2500 mm x Z 400 mm -Milling unit 2 ISO 40 milling motor Water-cooled power maximum 8/11 kW Tool holder SK40 -Tool magazine consisting of 2 chain tool changers Number of places 16 each Tool holder ISO 40 -Surface grid table in tandem version with extension stroke for safe loading Workpiece clamping via vacuum -CNC control type bwo 900C, 512 KB RAM, PC -Operating voltage 400V / 50 Hz Installed power approx. 34 kW, connection fuse 80A Operating pressure 6 bar Machine weight approx. 8000 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.

30.000 litre, Stock number: T2034, Litre: 30.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Lying: For burial, End bottoms: Dished, Outer cladding: Fiberglass coating, Tank cover: In the top, bolted, Ø 500 mm., Inner diameter: Ø 2480 mm. , Total length: L 6800 mm., Manufacturer: Gjettermann & Nielsen, Year: 1980/82

Technical data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 2.5 mm - Alu, plastic 6 mm - Cutting angle 90 ° - Depth stops - Footswitch - Space requirement approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

NUMBERING AND PERFORATING UNIT FOR SPEEDMASTER 52 -As new, used just few times -Shaft with 2 wheels -2 cams, one perforating arm -Available immediately in our warehouse

New Batch Pasteurisers custom made on request., Dairy Machinery UK offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume Capabilities (Litres): 1000, Control Panel: Stainless steel Control box, ...

New Batch Pasteurisers custom made on request., Dairy Machinery UK offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Ceam Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume Capabilities (Litres): 200 , Control Panel: Stainless steel Control box,  ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 500, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 300, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 400, Control panel: Stainless steel Control box, Controls, Thermomete ...

Key data: 635 mm, 510 mm, 460 mm

Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.

Shaoyang Textile Machinery Spunbond nonwoven manufacturing line SxxS , sms , SSmmS, SmmS, Short Description : Spunbond nonwoven manufacturing line SxxS , sms , SSmmS, SmmS, Year(s) : 2020 Quantity : 1 Location : Seller or machines location: MIDDLE EAST Last check : 05 Nov. 2025 This equipment is suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material mixed with master batch, antioxigen, anti-pilling agent and flame retardant. SxxS SmmS SSmmS Currently ss (SxxS) only, customer can do sms or ssmms by upgrading parts Platform is ready for additional beams, they can invest in additional parts to producr smms or ssmms The line can be configured to ve extended to produce high grade fabrics (add additional beams to producr more protective layers) Ⅰ. Application This equipment is suitabl ...

Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 240 ...

Fabricante / Modelo JOHNFORD Modelo SV-41 + DIVISOR 4º/5º EJE Año de fabricación 2007 CNC HEIDENHAIN iTNC 530 Mesa Dimensiones mesa 1.200 x 600 mm Peso máximo permitido en mesa 1.200 kg Recorridos y avances Recorridos (X / Y / Z) 1.050 / 610 / 610 mm Distancia desde nariz husillo a mesa 100-710 mm. Distancia desde centro husillo a columna 640 mm. Avance rápido (ejes X, Y) 30.000 mm./min. Avance rápido (eje Z) 20.000 mm./min. Avance trabajo 12.000 mm/min. Cabezal Cono husillo BT-40 Velocidad máxima husillo 60-10.000 rpm Potencia husillo 7,5 / 11 kW Cargador automático de herramientas Tipo cargador Bidireccional RANDOM Posiciones cargador herramientas 20 Diámetro máximo herramienta 100 mm Longitud máxima herramienta 320 mm Peso máximo herramienta 10 kg Equipamiento Refrigeración interna 20 Bar INCLUIDO 2 evacuadores de viruta longitudinales IN ...

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

CNC controller: SIEMENS 840D solutionline Operate Axes X-axis travel mm: 630 Y-axis travel mm: 800 Z-axis travel mm: 850 Worktable Number of pallets: 12 Table dimensions mm: 500x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Tool system Tool holder: HSK-A63 Tool magazine slots: 303 Equipment Chip conveyor Rotating inspection windows Rinsing gun Blowing air through spindle center selectable via M-function High pressure pump Tool breakage probe Coolant gun MPC – Machine Protection Control Infrared probe CE Round pallet storage Cooling Cooling through the Spindle Center bar: 80 Tank capacity: 980 Machine running times Under power: 46048 Spindle Working: 29258

Key data: 800 mm, 600 mm, 500 mm

Mikron HSM600U with 5-axis technology Efficiency and precision combined Maximum productivity With the integrated 6-fold pallet changer, the production process is optimized and enables uninterrupted operation. The machine impresses with its high efficiency and flexibility. Technical Highlights Travel: X/Y/Z 800/600/500 mm Spindle speed: up to 36,000 rpm HSK 50 Work table dolphin system (System 3R) Tool changer 60 places Heidenhain iTNC 530 IKZ and minimum quantity lubrication Details Year 2004 Program run: 35,982 hours Spindle hours: 22,032 hours WITHOUT tools and pallets as well as vices, can be purchased separately

Key data: 750 mm, 600 mm, 560 mm

DMG DMC 75V Linear . Details: YOC 2004 Program run 38,958 hours Spindle hours 37,462 hours Rapid traverse 90m/min Travel X-750/Y-600/Z-560mm Spindle HSK63 18,000rpm Tool magazine 30 places Direct path measurement system Table 950 x 650 Heidenhain iTNC 530 Outer blowing air Accessories: WITHOUT accessories such as tools, mounts and zero-point clamping system.

Key data: 750 mm, 600 mm, 400 mm

Röders RFM 750 - a reliable companion for your production requirements. This used 3-axis graphite processing machine from 2001 convinces with its solid construction and precision. Details YOC 2001 incl. graphite extraction Accessories WITHOUT accessories such as tools, mounts and zero-point clamping system or clamping plates. Technical data Travel X/Y/Z: 750/600/400 mm Spindle speed: up to 42,000 rpm Spindle power: 7.5 kW Machine weight: approx. 5,500 kg Dimensions: 3,000 x 2,500 x 2,800 mm

we sell a lot of hexagonal nut M20 Galvanized steel DIN 934-8 9400 pieces packed in boxes of 100 or 200 pieces on pallet. Only pick up in 27404 Zeven Only in one lot

The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation

Fabricante KONDIA Modelo A-10 Año 2008 CNC HEIDENHAIN TNC 530 Mesa Superficie mesa 1.200 x 500 mm. Ranuras en T (nº, anchura, distancia) 5, 18, 100 mm. Distancia mesa -suelo 885 mm. Distancia mesa – nariz husillo (min/max) 140 / 750 mm. Peso máximo permitido sobre mesa 850 kg. Recorridos y avances Recorrido longitudinal (X) 1.000 mm. Recorrido transversal (Y) 500 mm. Recorrido vertical (Z) 610 mm. Avance rápido ejes X/Y/Z 30.000 mm./min. Cabezal Cono husillo ISO 40 DIN 69871 Velocidad máxima husillo 8.000 rpm Potencia Husillo 22/28 kW Cargador automático herramientas Tipo Cadena Cambio Ramdom Posiciones almacén 40 Anchura máxima de la herramienta con posiciones adyacentes libres 150 mm. Anchura máxima de la herramienta sin posiciones adyacentes libres 75 mm. Longitud máxima herramienta 300 mm. Peso máximo herramienta 6,5 kg Equipamiento Refrig ...