schuler n used for sale

2 pieces Ice Cream Chest/Ice Cream Sales Chest/Ice Cream Chest/Freezer Used External dimensions W: 190xD:1100 H:140cm with round glass lid with lighting with rear storage compartment 2 doors not cleaned front lower fairing is missing

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...

x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...

Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...

Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...

Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor  ...

Used machine CNC Turning and Milling Center Machine Type: CNC Lathe Model No.: NLX2500Y/700 Manufacturer: DMG MORI Control: CELOS Year of Make: 2016 #001252 - Main spindle 4,000 rpm - Clamping cylinder main spindle - 3 cheek chuck - Foot switch (double) for main spindle - Y-axis - 12-speed BMT60-star turret for powered tools - Cantilever length X-axis driven tools 100mm - Scraper belt chip conveyor, rear discharge - High-pressure cooling system (800/1,100 W) 5bar - Line filter for coolant - Mechanical interface for oil mist separator 150mm - Without in-machine tool presetter This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine CNC lathe Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year of Make: 2006 TECHNICAL DATA: Max. turning length: [mm] 1,250 Max. Rotary Ø over bed: [mm] 600 Max. rotary Ø over slide: [mm] 410 Spindle bore: [mm] 90 Number of controlled axes: 2 Speed range: [1/min.] 3,000 Drive power: [kW] 36.5 / 27.5 Torque: [Nm] 785 Tailstock MK 5 Quill 80mm Number of turrets: 1 Travel X-axis ob. Rev. / unt. Rev.: VDI 40/8 Tool positions: 8 Machine weight: [kg] 5,500 Space requirement (LxWxH): [m] 5.0 x 2.0 x 2.2 m Features: Chip conveyor 3-jaw chuck [mm] 315 This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV P ...

Wheel type disc atomizer with high speed belt driven motor. Motor power: 22 kW - 30 HP. Can be used for a spray dryer with an output up to 1.000 kg/h of powder. Wheel diameter: 210 mm. Stainless steel AISI316L wheel. Sanitary execution. Weight 400 kg., Type of Machine: Atomizer, Capacity: Used for a spray dryer with an output up to 1.000 kg/h of powder, Wheel diameter: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensions: 120 x 120 x 235 cm, Weight: 400 kg

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV Puma), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ0321, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 641, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV Pum ...

The NETZSCH NM031BY02S12B NEMO® pump is a progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 0,75 kW - 230/400 V - 50 Hz - 1.375 rpm - 3,64/2,10 A. Connections on the inlet/outlet: DN 50. Current capacity: 70 - 400 ltr/h. Pressure: up to 8 bar. Rotor speed: 30 - 150 rpm., Key Advantages:, - Valve-free design with stab ...

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.

An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.

General SKU221Y083 MakeNetzsch SerialD4095257/6300005469/0100 Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump MaterialStainless steel Eccentric Screw Pumps Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Magento base g_extra_specificationsNetsch Nemo pump 9-312 l/min , 0,23 kW Information Year of construction2021 LocationBarneveldEccentric Screw PumpsNetzschPumps > Eccentric Screw PumpsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Condition NEW Brand NORD Type SK773.1 VL-80LH/4 TF RD Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 5,4 RPM i 260,18 Shaft size mm 50 mm Version IE2 Length 60.00cm Width 25.00cm Height 25.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

König Mini Rex 4000 Roll Plant  Product descriptionManufacturer: KönigModel: Mini RexType: 4000 TR/G-S SKG58+RK58Year of construction: 2007Roll plantModel: G 2000Type: SA2König G2000 Compact plant for round-knitted, stamped, oval or folded-long-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeriesCompact pre-proofer system with Mini Rex Futura head machinemax. Hourly output in proofer operation: 2,000-2,500 pieces, infinitely adjustable for higher output

used Janssen forming rollers for biscuitsProduct descriptionManufacturer: JanssenType: German MännchenWidth 240mmSee pictures for details.

Kalmeijer Pastry Forming Roller KGM German Männchen 1502-930BProduct descriptionManufacturer: KalmeijerType: German MännchenNr.: 1502-930Bowant: usedDough figure:Dimension: 82x33 mmThickness: 2.5 mmWeight: 8 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Nut Sticks 1100-910BProduct DescriptionManufacturer: KalmeijerType: Nut SticksNo.: 1100-910BTrade: UsedDough Figure:Dimension: 35 mmThickness: 3 mmWeight: 4 grRoller Width: 250 mmDetails see pictures.

Bread roll line König Mini Rex G2000 Â Product description Manufacturer: König Model: Mini Rex G2000 Year of construction: 2003 Condition: used, functional, bakery condition - please thoroughly before use König G2000 Compact system for round-knitted, stamped, oval or wrapped-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeries compact pre-proofer system with Mini Rex Futura head machine max. hourly output in proofer operation: 2,000-2,500 pieces, infinitely variable

Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures

Compact machine König Artisan SFR TS Bakery condition The machine needs to be overhauled or completely checked Manufacturer : König Type : Artisan SFR TS Year of construction : 2008 Touchpanel control Power approx. 6000 pieces/str. Stainless steel version Connection 400V, 16A-CEE plug with lifter Bakery condition Details see picture

Neolt NeoWeld is the series of pulse welding machines designed to meet the production needs of sign-makers and professionals in the digital printing, indoor/outdoor advertising and POS communication. The welding pulse technology choosed for NeoWeld stands as a substantial alternative to the high-frequency, ultrasonic and hot air technologies, offering a number of indisputable advantages from the technical, operational, economical and dimensional point of view. ? Heating length about: 1300mm ? Heating width about: 25 mm ? Working pressure: 220 kg./cm ? Electrode temperature: from 70° to 250° C ? Air pressure: 7/8 Bar ? Dimensions: L1500 x W1300 x H1400mm. ? Machine Weight: 433 Kg. / 954,6 Lbs. ? Height of work table: 1000 mm. ? Power: 400V 50/60Hz ? Power supply: 400V 50/60Hz ? Consumption: about 6 kW. plug CEE (red) 16A 3P+T 400V 50/60Hz ? Power supply: 220/240V 50/60Hz ? Consumption:  ...

Nilpeter FB 4200 S UV dryers (GEW) all stations Corona Treater 2 Die Stations Sheeting Station Roll Lift 1 Waste Rewind 1 Product Rewind with Roll lift Magnetic Dies

NEW Machine Paper size max 54 ? 72 cm Paper size min 180 ? 300 mm Paper sheet thickness 0.90 mm Foil-pulls &, programs Standard 2 ? upgradable to 4 Heating zones 6 for optimal temperature allocation Available in following sizes: 38 x 52 40 x 58,5 56 x 77 56 x 82 64x90 Optional: Hologram unit Delivery time: 3-4 Month after order

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

Thermobinder Nederland Max book size 380 mm Min-Max thickness 5-50 mm Cycles up to 250

Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.

General SKU394U1116 MakeNeumo GmbH LocationBarneveld CEcheck TypeChromatography column Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume630 Ltr. Specified Features - Extraction Capacity630 Ltr. Diameter600 mm Length2200 mm With jacketcheck Half coil jacketedcheck Max. temperature-40ºC/+200ºC, MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435(316L) Information No.H3146 Year of construction2008 Mounted on wheelscheck Floorspace1,22x1,22 m Total height2,75 m Weight1000 kg Extra SpecificationsProduct space: Volume: 630 l, Pressure: -1/+6 bar, Temperature: -40ºC/+200ºC, Output: DN40, Input: DN100 Mantle chamber: Volume: 35 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC Tube chamber: Volume: 3 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC ExtractionBiotechnologyAgrochemicalsCatalysts & fillers ...

General SKU394U1119 MakeNeumo GmbH TypeChromatography column No.H3144 Year of construction2008 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume630 Ltr. Specified Features - Extraction MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Capacity630 Ltr. Diameter600 mm Length2200 With jacketcheck Half coil jacketedcheck Max. temperature-40ºC/+200ºC, Information Floorspace1,22x1,22 m Total height2,75 m Weight1000 kg CEcheck Extra SpecificationsProduct space: Volume: 630 l, Pressure: -1/+6 bar, Temperature: -40ºC/+200ºC, Output: DN40, Input: DN100 Mantle chamber: Volume: 35 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC Tube chamber: Volume: 3 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC ExtractionBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolvents ...

General SKU394U1117 MakeNeumo LocationBarneveld CEcheck TypeChromatography column Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume630 Ltr. Specified Features - Extraction Capacity630 Ltr. Diameter600 mm Length2200 mm With jacketcheck Half coil jacketedcheck Max. temperature-40ºC/+200ºC, MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Information No.H3145 Year of construction2008 Floorspace1,22x1,22 m Total height2,75 m Weight1000 kg Extra SpecificationsProduct space: Volume: 630 l, Pressure: -1/+6 bar, Temperature: -40ºC/+200ºC, Output: DN40, Input: DN100 Mantle chamber: Volume: 35 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC Tube chamber: Volume: 3 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC ExtractionBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDe ...

General SKU394U1118 MakeNeumo GmbH TypeChromatography column No.H3143 Year of construction2008 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume630 Ltr. Specified Features - Extraction Capacity630 Ltr. Diameter600 mm Length2200 With jacketcheck Half coil jacketedcheck Max. temperature-40ºC/+200ºC, MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Information Floorspace1,22x1,22 m Total height2,75 m Weight1000 kg CEcheck Extra SpecificationsProduct space: Volume: 630 l, Pressure: -1/+6 bar, Temperature: -40ºC/+200ºC, Output: DN40, Input: DN100 Mantle chamber: Volume: 35 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC Tube chamber: Volume: 3 l, Pressure: -1/+16 bar, Temperature: -40ºC/200ºC ExtractionBiotechnologyAgrochemicalsCatalysts & fillersSolventsDetergent & surf.O ...

Nederman Dust Collector / Silo Dust Collector with Control and Compressed Air Treatment Manufacturer: Nederman Type: DFC-08M Item number: 5512680 Year of manufacture: 2023 Manufacturer of pressure vessels: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial Number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure Test Date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Control: Nederman DFC-08M Controller Compressed air treatment: Camozzi MC202-D00 Max. inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB Control/Connector Housing Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / Scope of delivery ...

Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad  ...

A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible.

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

diameter range 16 mm shaft length under head 25 -160 mm output pieces/min 110

semi tubular rivets diameter range 5 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 470

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

diameter range 4-8 mm shaft length under head 165 mm cutting length 200 mm output pieces/min 100

diameter range 6,35 mm shaft length under head 70 mm cutting length 95 mm output pieces/min 300

bushing cut-off diameter range 6 mm cutting length 95 mm shaft length under head 75 mm output - pieces/min 200

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350