129,479 used machines on RESALE, but how to find them? Machine Search
Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.
Nauta Mixer MBX-6R All parts that come into contact with the product are made of stainless steel Swivel arm; Stainless steel Mixing screw; Stainless steel Container; Stainless steel universal joint; Stainless steel Condition: The mixer is not overhauled. We can also offer you a complete overhaul. A viewing is possible at any time.
NNP Rotary dip tank Stainless rotary dip tank, variable speed, rotary drum length 900mm, rotary drum diameter 1100mm, central bottom drainage, previously used on fruit and veg, mobile, 3Ph
A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible.
turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...
Offer 25335 Specifications: - Nominal temperature / continuous temperature infinitely variable up to 1280 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 19 - Drive 400 V / 5.5 kW - Interior dimensions approx. W 250 x H 140 x D 350 mm - Usable volume 11 L - Base frame W 900 x H 900 x D 950 mm - Space requirement approx. W 800 x H 600 x D 750 mm - Weight approx. 80 kg
Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible.
turning length: 4.500 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Back finishing with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the booklet spine by means of a special pressing system Max. number of sheets of the brochure up to 30 sheets (80 g/m² paper) Max. power (set/hour) for single pass 1600 hours Double pass 1400 hours Booklet sizes min.(mm) 70 x 105 Booklet sizes max.(mm) 350 x 250 Power supply (V) 230 Volt Net weight (kg) 100 Gross weight (kg) 120
Dimensions (L/W/H): 2394x990x3115 mm Weight: 0 kg Total power requirement: 2,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2040x1495x1025 mm Weight: 540 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8800x2100x2100 mm Weight: 6000 kg Total power requirement: 18-36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1980x1390x1240 mm Weight: 400 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2120x1585x1025 mm Weight: 560 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8800x2100x2100 mm Weight: 6000 kg Total power requirement: 18-36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1624x950x2345 mm Weight: 0 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement.
🎯 Perfect Upgrade for Renovators, Formwork Pros & MANTO Fans! Are you already using MANTO Laufkonsolen 90 ? Then this accessory set is the ideal addition for safer and more efficient work on your site.🛠 Why you should get it: Safe working: Guardrail attachment for 900 mm wide platforms Quick to set up: Can be mounted without special tools Perfect fit: Compatible with both vertical and horizontal MANTO panels Buy as a set & save: Ideal for retrofitting and clearance stock 📦 Only while supplies last! Order now and get started immediately.⚡ This accessory package enhances your existing MANTO system and makes every platform safer in no time †thanks to simple attachment with spring pins and additional bolts. All at a top price . 🛒 Don’t wait until your accessories are gone! Reserve your complete set now ...
Technical data Maximum pressure: 26 tons Power connection: 400 V/ 4.6 kW Press force: 2.7 kg/cm² Year of Make: 2016 Bale size: 1200x800x1150 mm Bale weight: approx. 400-450 kg Price: on request Machine is fully functional, after technical supervision and renovation.
⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 41,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...
✨ Grab it now †your top scaffold deal! ✨ We’ve got a 100 m² facade scaffold with a system width of 1.09 m , ready to use right away. The package includes a walk-through frame, adjustable base jacks, and everything you need for your next project. 🏗ï¸ This set is based on the proven Layher Blitz frame scaffold and combines durable materials, high stability, and easy handling . The steel or aluminum decks are particularly long-lasting, and the integrated walk-throughs with ladders make working comfortable and safe. Thanks to the standardized 2.57 m frame length , the scaffold can be easily expanded and is fully compatible with all original components. 💪 The plug-in system allows for quick assembly and disassembly, saving valuable time on the construction site. At the same time, the sturdy design ensures you can work safely ...
Doka diagonal crosses in âââ star quality. The diagonal crosses are used to reinforce shoring frames. 💡 All advantages at a glance: quick and easy assembly thanks to permanently connected diagonal braces secure and quick attachment to the shoring thanks to innovative locking pawls different lengths for variable frame spacing from 1.00m to 3.00m in 50-cm-increments clear length identification using color clips and embossing compatible with both the Staxo 40 and Staxo 100 shoring systems 🔧 ⚙ 🔨 The material is supplied in stacking pallets, these are not included in the unit price. Price: from € 30,60 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwor ...
In this package you will find ââ star multi-purpose walings in different lengths. The ledgers can be used universally - they are used to transfer loads and give the formwork element stability and rigidity. Depending on the requirements, the beam can be attached to the steel wall ledger using different fasteners. The multi-purpose ledgers are bundled on wooden supports. If required, we can also take care of delivery 🚛 or you can simply collect your multi-purpose walings from the Form-on yard by yourself . Price: from € 73,20 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 17 x Multi-purpose waling WS10 Top50 0.50m (Art-No. 580001000), 2 stars, € 23.5 / pc 17 x Mult ...
In this package, youll find used Doka ceiling props in excellent condition! The ceiling props are super lightweight and feature a hole numbering system for quick and easy height adjustment . With a load capacity of 20 kN , they’re strong enough to perform even under high load. 💪 🔧 Easy handling †The thread can be opened and screwed with ease. 🔁 🔧 Quick adjustment †The props can be extended in a flash. 🚀 🔧 Great condition †The top and bottom plates are in perfect shape. ✔ 💡 Delivery only in stackable pallets (1.55 x 0.85 m) †pallets are not included in the price per piece. 📦 Price: from € 29,90 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. ...
This package contains used Doka ceiling props in excellent condition! 💥 It includes both the Top and Eco versions , so you can choose the one that fits your needs. The ceiling props are known for their lightweight design and feature a hole numbering system for quick and easy height adjustment . With a load capacity of 30 kN , they provide reliable performance even under heavy loads. 💪 🔧 Fast & easy †The thread opens and screws in effortlessly. 🔁 🔧 Convenient adjustment †The props can be easily extended . 🔧 🔧 Well-maintained †Top and bottom plates are in excellent condition. ✔ 💡 Delivered only in stackable pallets (1.55 x 0.85 m) †pallets are not included in the unit price. 📦 Price: from € 34,90 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Sub ...
In this package you find PERI MULTIPROPs â star-classified. The aluminum floor prop can be used individually or installed in a support tower. 👀 All technical data at a glance: particularly high load-bearing capacity with low dead weight continuous, self-cleaning thread built-in tape measure enables quick and precise pre-setting inner tube failure protection built-in crush protection minimizes the risk of injury Extension lengths: MULTIPROP MP 250 1.45-2.50m MULTIPROP MP 350 1.95-3.50m MULTIPROP MP 480 2.60-4.80m MULTIPROP MP 625 4.30-6.25m The floor props (MP 250 †MP 480) are bundled on support wood, 56 ...
Used Doka multi-purpose walings in various lengths. The walings are multifunctional - they transfer loads and give the formwork panel stability and rigidity. Depending on the requirements, the beam can be fastened to the steel wall ledger with different fasteners. The multi-purpose walings have only light rests of concrete. The material shows slight sign of use. The walings are bundled on supp. timber. Price: from € 27,20 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 75 x Multi-purpose waling WS10 Top50 0.50m (Art-No. 580001000), 3 stars, € 25.4 / pc 58 x Multi-purpose waling WS10 Top50 0.75m (Art-No. 580002000), 3 stars, € 35.1 / pc 394 x Multi-purpose waling WS10 ...
⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 62,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...
⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 52,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...
Compact, lightweight, and immediately available †this set of used Alu Master formwork panels is the ideal addition to your existing system . 🚧 With approx. 30   m ² , it offers maximum flexibility for smaller jobs or targeted system expansions †cost-efficient, crane-independent, and ready to use . 👉 Only €2,275 for the complete set! What makes the Alu Master so smart:   Aluminum hollow-chamber profile †lightweight & easy to handle, perfect for crane-free formworking Compatible with Stahl Master formwork †seamlessly integrates into your existing setup Powder-coated & easy to clean †for clean results with minimal effort   Perfect for small teams & quick projects †efficient, flexible, well-designed ✨ Secure it now †used ...
Used CNC valve seat processing machine NEWEN EPOC XL. Working range valve seat diameter 13-240 mm. Valve guide working range 4-20 mm. Max. workpiece weight approx. 900 Kg.
Kneading capacity dough/flour: approx. 80kg/50kg, bowl capacity: 120l, machine dimensions X/Y/Z: approx. 1600mm/700mm/1200mm, weight: approx. 500kg. Including stainless steel bowl. The control system was renewed in the year 2022. Documentation available. An on-site inspection is possible.
Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H
Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new.
turning diameter over bed: 1250 mm turning diameter over slide rest: 1250 mm turning length: 9000 mm turning speeds: U/min faceplate: 1300 mm 3-jaw chuck: 500 mm steady: 2 centre distance: 10.000 mm bed width: 1250 mm turning dia. in gap: 1600 mm total power requirement: 54 kW weight of the machine ca.: 33 t dimensions of the machine ca.: m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...
5-color offset printer + flexo + rotary die-cutting Year 2020 Machine equipped with belt guide and BST register chamber
General SKU242X187 MakeAlfa Laval LocationBarneveld CEcheck TypeNX912B-11G Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter275 mm Screw length1260 mm Inletcheck Liquid outletcheck Solids outletcheck Motor15 kW, 380/660 volt, 2940 rpm Max. rotor speed4400 rpm MaterialStainless steel 1.4404 (316L) Information No.5123849 Year of construction2012 Mounted on framecheck Floorspace2,60x0,80 m Total height0,92 m Weight1500 kg Extra SpecificationsMax solids 3,0 kg/dm3, work temperature 0°C-100°C DecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...
length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. size= 46 x 27 cm, Availability= 012026, Number of drill spindles: 4 Max. stack height (mm): 60 Feeder table width (mm): 460 Feeder table depth (mm): 270 Drill diameter (mm): 2 – 35 Drill spindle spacing (mm): 19 – 425 Drill speed: 2-stage Time per work cycle (sec): 3.3 Automatic hub Power supply: 400 V 50 Hz three-phase current Output (kW): 1.8 H x W x D, net (cm): 139 x 71 x 77 Weight, net (kg): 265 LOT Loaded in truck or container
Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded
A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible.
Norfoil 2000 reel to reel hot stamping press Web width 160 mm Unwind Web guide Cutting Lamination Hot foil Rewind Waste rewind Razor blade slitter
CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy
Manufacturer: Rehm Model: VXP+ nitro 3500 Year of Manufacture: 2014 Type of Machine: Reflow Oven Electrical Specifications Voltage: 3 × 230 / 400 V Frequency: 50 Hz Power Rating: 79 kW Current: 115 A Cooling & Gas Cooling: 20 l/min, minimum 2 bar Nitrogen Consumption: approx. 21 m³/h Exhaust Air: 400 m³/h Operating Pressure: 6 bar Dimensions & Weight Length: 6.4 m Width: 1.60 m Height: 1.80 m Weight: approx. 2 t Features & Equipment - SMEMA connection - Double track - Automatic width adjustment - Fast cooling unit - Program manager Find more here - / Contact us at -
General SKU252X215 MakePharmatec LocationBarneveld CEcheck TypeRet P15680 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel Heat exchangercheck Verticalcheck Heating surface±5m² Tube capacity67 l. U-typecheck Number of tubes:43 Tube diameter10 mm Tube length2000 mm Max. temperature200°C Shell capacity22 l. Shell diameter250 mm Shell length2100 mm Max. temperature200°C Shell connectionscheck Information No.12 1675 01 Year of construction2012 Floorspace0,75x0,75 m Total height2,2 m Weight240 kgShell and tube heat exchangersPharmatec GmbHHeat exchangers > Shell and tube heat exchangersBrand > Pharmatec GmbH What you c ...
Engine Brand: SCANIA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 294 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/scania-dc09-074a-new/42368 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 985 kg, Type number: DC09 074A
Engine Brand: KOHLER, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 18 Kw, Rated Speed: 3600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/kohler-kdw1003-e4-new/4228 5, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 78 kg, Type number: KDW1003/E4
Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Red , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , Rated Power: 352 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-nta855-cpl1383-use d/42364, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.575 kg, Type number: NTA855 CPL1383
YORK JS44F-N46/50S Water Cooled Chiller YORK JS44F-N46/50S chiller in very good condition, ready for operation. Ideal for industrial cooling applications. Temp. Limit : Min. -10, Max. 10 Capacity : Min. 3.8 l/s, Max. 18 l/s
maximum number of results exceeded
please refine your search
