schuler n used for sale

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmWeight approx.11100 KgSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWDimensions (L x W x H)3,1 x 4,86 x 2,84 m(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

KW Set Lufcooled AERMEC Techn. data Aermec: • Type NRA 1500 • Cooling capacity: 390 kW • Y.O.M.: 2004; • 6 x fans; 6 x Danfoss Scroll Compressor • R 407 c; 2 circles a 44 kg; • Dimensions: B 2.2 x L 4.3 x H 2.6 m plant ran until the last, was serviced until 2019; was used for indoor air conditioning.

Brinell hardness tester with fully automatic test sequence, automatic Brinell hardness impression measurement The machine is equipped as standard with a motorized 6-fold turret head (3 penetration bodies, laser positioning system and 2 lenses with ring light). The video measuring system with 18-MP video camera delivers excellent images, the automatic evaluation of the Brinell-Calotte impression is extremely fast and very precise. With this fully automatic hardness tester, only START has to be operated after the focus: The impression and the evaluation are fully automatic. At the touch of a button, a test certificate is automatically generated. The IMPRESSION™ hardness test software with digital zoom function, offers numerous functions for converting Brinell hardness results into other hardness scales or tensile strength. Highlights of the machine: - Hardness scales: All Brinell  ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Continuously working melt filter New and unused machine Visit possible by arrangement.

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

This machine can be used for all kinds of BAADER equipment. Designed for resharpening knives and for providing extremely worn blunt knives with exact chamfers again. Circular knives with a diameter of 200 – 400 mm can be sharpened and an additional tool can also be attached to sharpen knives with a diameter of 120 – 200 mm. Advantages of using NM61 Knife Sharpening Machine: Gentle treatment of the material thanks to the lapping method. Sharpened knives are completely free from any burrs. Laid out for a considerably extended size range. Highest efficiency. Power consumption: 0.21 kW. Dimensions: 750 x 450 x 550 mm. Weight (net/gross): 66/105 kg

Chiller LENNOX Type: NAC 270D NM1M Cooling capacity: 272.8 kW 2 x compressors Copeland: ZP295KCE-TWD-524 and 2 x compressors Copeland ZP 385KCE-TWD-524 R410A Built: 2008 Dimensions: 3600 mm x 2300 mm x 2000 mm Number of pieces in stock: 1 Condition: Used Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Electric hot air steamer with direct steam Cooking mode ac (Automatic Cooking): automatic cooking system for recipes from all over the world with a photo showing the dish. Manual cooking with three cooking modes: convection from 30°C to 300°C, steam cooking from 30°C to 130°C, combination of convection and steam from 30°C to 300°C. Programmable operating mode: Cooking processes can be programmed and stored in automatic sequence (up to 15 cycles). Each program can be assigned its own name as well as illustrations and information about the recipe. Clima® - Automatic measurement and control system of the percentage of humidity in the cooking chamber. Fast-Dry® system for rapid dehumidification of the cooking chamber. Functionality Configurable display on demand, bringing the most frequently used programs to the forefront. Automatic start of the cooking process (Ac) wi ...

Stock# U2450-2 Used progressing cavity pump by Netzsch model NM045SH04S24H. Contact parts designed in stainless steel, hygienic design. Inlet has diameter 80 mm, connection with reduction to 50 mm. Outlet has diameter 50 mm. Pump is driven by reducer and el. motor 7.5 kW, 1445 rpm, 400/690 V, 50 Hz. Working screw rotation up to 188 rpm. This size of pump can reach output up to 20 m3/h at rotation 550 rpm. With current drive pump can reach output about 6.8 m3/h. Feeding pressure up to 24 bar. Pump is mounted on mobile stainless steel supporting frame. Included set of hoses: - 1 x dia. 80 mm x L 250 cm. - 1 x dia. 65 mm x L 250 cm - 1 x dia. 35 mm x L 250 cm - 1 x dia. 25 mm x L 250 cm - 1 x dia. 35 mm x L 120 cm Transport dimensions: L 280 cm x W 70 cm x H 95 cm.

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...

1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h

Excenter screw pump Make: Netzsch Type: NE 20A Speed-controlled gearbox (manufacturer: Stöber) Speed: 64-320 rpm Power: 0.55 kW at 1380 rpm Dimensions LWH: 1200 x 300 x 350 mm Weight: approx. 80 kg

NARGESA C3006 hydraulic guillotine shears were built in 2015 in Spain by PRADA NARGESA, S.L. The machine, which is designed for precision cutting of sheet metal with a maximum thickness of 6 mm, has quality knives with four cutting edges with increased service life. The beam is driven by a powerful hydraulic unit, which, like the electronic system, is made up of components from renowned brands. Easy operation of the machine, on the other hand, is ensured by a digital LCD display with an installed NC controller. The NARGESA guillotine shears weigh 8000 kg. Technical specifications of the NARGESA C3006 guillotine shears - maximum workpiece thickness (black steel 450 N/mm2): 6 mm - maximum workpiece thickness (stainless steel 700 N/mm2): 4 mm - maximum cutting length: 3030 mm - number of strokes: 12/min - cutting angle: 1,75° - maximum back stop distance: 700 mm - back stop posit ...

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

Cybelec N2X 102

Cybelec NIC 121

Cybelec NSY 113

Cybelec NOT 102

Edgethickness: 0,3 - 20 mm Edge height: 14 - 65 mm Edge length: minimum 160 mm Feedrate: 6 - 30 m/min Workpiece thickness: 8 - 60 mm Workpiece width: minimum 65 mm Workpiece length: minimum 150 mm

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 92cm Width: 164cm Height: 150cm Electric power: 1.5kW Delivery time: After the payment, from the stock

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Cybelec NIN 101

Cybelec NCT 100 02 a

Cybelec SA NMM108

Schneider NGEA-2410 T40/E

Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

Chiller / chiller air-cooled, Type: NTC 20 – 21 kW NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor / outdoor installation IP 54. Including shell-and-tube evaporator, buffer tank 110 ltr. and built-in circulation pump. Galvanized steel frame, hot painted with polyester powder. Extras: - Mounted expansion tank for internal water content only - Stopcock between water inlet and outlet, - Water outlet string regulating valve Cooling capacity kW 21 Cold water temp. Exit/Entry (°C): 15 / 20 Volume flow (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting Current Circuit (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Hei ...

Material: Normal steel Engine drive: 18.5 kW Dimensions: L 2000 mm x W 550 mm x H 1000 mm Kerb weight: approx. 300 kg Dimensions: L 2000 mm x W 550 mm x H 1000 mm Speed: 261 rpm Capacity: approx. 45 m3/h Operating voltage: 400 V Tech. Documentation: No Condition: Used Tech. Documentation: No Accessories: Conveying pressure 2 bar

Chiller / chiller air-cooled, Type: NTC 20 – 21 kW NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor / outdoor installation IP 54. Including shell-and-tube evaporator, buffer tank 110 ltr. and built-in circulation pump. Galvanized steel frame, hot painted with polyester powder. Extras: - Mounted expansion tank for internal water content only - Stopcock between water inlet and outlet, - Water outlet string regulating valve Cooling capacity kW 21 Cold water temp. Exit/Entry (°C): 15 / 20 Volume flow (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting Current Circuit (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Hei ...

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

Nilpeter FA5 Labelpress - 10 – Colour – 535mm Year of Manufacture: 2010 ________________________________________ Technical Description: Web specifications: • Number of printing units: 10 printing units for UV colour • Printing unit 1 and printing unit 10 UV ink and water-based ink (varnish) possible • Max. web width: 535 mm • Corona: Vetaphone 3.0 KW • Turning cross: yes - flexible on rails • DE - RE Lam Station: printing unit 1 + 2 + 3 + 4 • Double Layer Station: SpilkerCold embossing unit: yes, with rail-based unwinding and rewindingDie cutter: Kocher & Beck / Gap Master System • Register control: P2P/ P2C (manual and automatic electronic register system for each printing unit) • Drying: GEW - UV drying - Rhino system • Hot air drying: printing unit 1 and printing unit 10 • Cooling: Cooling water rollers in each printing unit  ...

NILPETER FA2500 – 10-color Year of Manufacture: 2001 ________________________________________ Machine Specifications and Equipment:  10 colours  Max. material width - 280 mm  Max. printing with 260 mm  drying system GEW UV VPC  print repeat range Z60 - Z120 teeth  machine speed - 15 - 150 m/min  Rewinder & Unwinders Type and Reels Diam.  2 x UNWINDER / 1 x REWINDER / 800 mm max  web guides - 2 x ET  video system ET ELSCAN  magnetic cylinders: Z81, Z99, Z105.  Possible additional 3 magnetic cylinders for special price.  print cylinders and gears - sets of 8 pieces: Z82, Z92, Z95, Z97, Z99, Z101, Z105, Z110, Z115  Aniloxes: 1x 1,000 x 3.5 2x 1000 x 4 1x 1000 x 4.5 5x 300 x 6.6 2x 650 x 5.1 Machine is adjusted for MULTI LAYER PEEL OFF LABELS (2 unwinders). Machine is in very good condition

Make: NAPPIER Type: HP 200 Serial Number: 204/7839/20EF , 204/7417/20EF RPM: 21600 / 23000 Temp.: 1200 DEG. F Patient application No.: 20105/48

Description

Description

Description Equipped with Robot S400

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 120cm Width: 200cm Height: 200cm Electric power: 4.5kW Delivery time: After the payment, from the stock

1) Make:Cummins Model:NT855G4 ENG.No:2.3216300 Ref No. REB2-02 ALTERNATOR Make:Stamford Type:MHC434E Serial Number:Y3157/02 KVA:325 HZ:60 2) Make:Cummins Model:NT855G4 ALTERNATOR Make:Stamford Serial Number:Y3159/01 KVA:325 HZ:60 RPM:1800 V:440/254 3) Make:Cummins Model:NT855G4 Serial Number:5324 ALTERNATOR Make:Stamford Type:HC1434D Serial Number:0113587/01 Date:Oct-99 KVA:295 HZ:50