schneider tankbau used for sale

Signal tower, visual signaling device TELEMECANIQUE, SCHNEIDER ELECTRIC Series XVB 1 x Terminal Unit: XVBC21 / 1 x signal light red: XVBC34 1 x signal light green: XVBC33 with lid and mounting base Base diameter: Ø 70 mm used, tested ! Dimensions: 280 x 80 x 80 mm

Power contactor SCHNEIDER LC1D09BD 4 kW 400 V New ! Dimensions: 100 x 50 x 75 mm

Signal tower, visual and audible signaling device TELEMECANIQUE, SCHNEIDER ELECTRIC Series XVB 1 x Terminal Unit: XVBC21 1 x buzzer unit: XVBC9B 1 x signal light red: XVBC34 1 x signal light green: XVBC33 with lid and mounting foot Base diameter: Ø 70 mm used ! Dimensions: 350 x 75 x 75 mm

Variable transformer, toroidal transformer SCHNEIDER / PREUSSLER 64-22032-00 95 ( 64-22032-0095 ) 3,2 A Prim. 220 V sec. 0 - 220 V 50 - 400 Hz Control transformer for LU32 ! Dimensions: 120 x 120 x 110 mm

Switch-disconnector, main switch, circuit breaker, 3-pole SCHNEIDER ELECTRIC Type V5 30 kW 125 A 690 V AC New ! Dimensions: 145 x 125 x 155 mm

Command transmitter housing, 2 pieces SCHNEIDER ELECTRIC XAP M1501 Number of encoders: max. 1 Length: 80 mm Width: 80 mm Height: 77 mm Bore: Ø 22 mm Thread: M20 Material: Zinc injection molding New ! Dimensions ( single package ): 90 x 85 x 95 mm

Control Module SCHNEIDER TSXLE20 TSX 47/67/87/107 New ! Dimensions: 220 x 210 x 40 mm

Transformer, transformer, with rectifier, power supply, power supply SCHNEIDER ELEKTROTECHNIK GmbH Type: DTB 360 PC - 891203 T5 0.36 kW Primary: 230 / 400 V 3AC 50 / 60 Hz Secondary: 24 V DC 15.0 A used, tested ! Dimensions: 185 x 140 x 130 mm

Electronic Module, Digital Edition SCHNEIDER, AEG AS-BDAP-216N TSX Compact Output: 2x8 24V DC 0.5 A unused ! Dimensions (package): 210 x 160 x 50 mm

Electronic Module, Positioning Module AEG, SCHNEIDER SAA103 Modicon 6058-042.248 263 New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG BIK116 SFB-Master 24V//2X5VDC New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG ADU116 16 Analog I U/I, 11 bit New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG BKF102 Modnet 1/IS Master 6065-042.703 580 New ! Dimensions (packaging): 290 x 200 x 50 mm

Power contactor SCHNEIDER ELECTRIC TeSys - 040416 ( TeSys-040416 ) CAD32BD 2F1042 Control voltage: 24 V DC New ! Dimensions: 115 x 95 x 50 mm

Power contactor SCHNEIDER ELECTRIC TeSys - 040142 CAD32BD 2F1217 Control voltage: 220 V 50 / 60 Hz New ! Dimensions: 115 x 95 x 50 mm

Pressure vessel, compressed air tank with bracket M. SCHNEIDER KOMPRESSORENWERK BLITZ Kompressoren Content: 50 litres Type mark: ZU24/13 Operating pressure: 11 atm ( approx. 11.8 bar ) spare part for construction machine PAUL ERNST FG3-1400 ! used, checked ! Dimensions: 970 x 350 x 440 mm

Pressure gauge valve with test connection AS SCHNEIDER PN250 DN4 G1/2 250 bar New ! Dimensions: 120 x 90 x 100 mm

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Packaging machine for various areas in the GRANULES category: Food - snacks, peanuts, sweets, chips, dried fruits, cookies in general, etc. Automotive - small parts in general. Current setup for packages from 30g to 60g. Possibility of packing larger volumes with the acquisition of a hopper for setup. Productivity: 40 to 60 packs per minute. Description: Vertical packaging machine made of stainless steel and carbon steel parts with zinc plating. Front, side, bottom, upper protections and moving parts manufactured in compliance with NR-12. 10-head scale coupled to the machine, product supply conveyor, output conveyor, electrical panel in compliance with NR10. Configured with Schneider PLC and HMI Touch Screen with color screen where controls and functions, production and storage of data and recipes are managed. Equipment Voltage: 220v, Three Pha ...

Manufacturer: Purete, Type: PRT-R1119 1950 mm, Year: 2020 NEU, Control: Schneider oder Siemens, Program: Touchscreen, Work piece width min-max mm: 1950, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2-80, Operating side: links oder rechts, Working height: 980, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 0-20, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 0-20, Gummierte Auftragswalze(n): EPDM/SOFT/PU, kW - Leistung Auftragswalze: 1,5, Double rubber coating: möglich, Dosierwalze verchromt: yes, Dosierwalzenschwindigkeit m/min min-max: 0-20, kW - Leistung Dosierwalze: 1,5, rbakel: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: möglich, Roller heating: möglich, Einbaulänge Auftragsmaschine mm: 1000, Year :2020 NEU

Manufacturer: Purete, Type: PRT P3113, Year: 2020 neu, Control: Siemens oder Schneider, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts oder links, Working height: +/- 900, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5 - 20, Auftragswalzengeschwindigkeit m/min min-max: 5 - 20, Steuerung Nicht-Ex : yes, Attachment bracket roller: yes, everse drive: no, Separate Lackheizung: yes, Verstärkter Motor Transportband: 2 kW, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Einbaulänge Auftragsmaschine mm: 5.000, UV dryer: 2, Number of lamps: 2, kW power 1 lamp: 17, kW power all lamps: 34, Lampen schräg eingebaut: 0, Lamps straight installation: 1, Lamps from below: 0, Adjustable: yes, Leistung UV-Lampen W/cm: 120, Y ...

Manufacturer: Purete, Type: PRT P3106, Year: 2020 neu, Control: Siemens oder Schneider, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 620, Operating side: rechts oder links, Working height: +/- 900, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5 - 20, Auftragswalzengeschwindigkeit m/min min-max: 5 - 20, Steuerung Nicht-Ex : yes, Attachment bracket roller: yes, everse drive: no, Separate Lackheizung: yes, Verstärkter Motor Transportband: 2 kW, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Einbaulänge Auftragsmaschine mm: 5.000, UV dryer: 2, Number of lamps: 2, Lampen schräg eingebaut: 0, Lamps straight installation: 2, Lamps from below: 0, Adjustable: yes, Leistung UV-Lampen W/cm: 120, Year :2020 neu

Manufacturer: Purete 2 Walzenauftragsmaschine, Type: PRT-R2113B, Year: 2020 NEU, Control: Schneider oder Siemens, Program: Touchscreen, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: links oder rechts, Working height: 980, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 0-20, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5-20, kW - Leistung Auftragswalze: 1,5, Shore härten möglich: 5-65, Durchmesser Auftragswalze mm: 245, Double rubber coating: 1 Walze 50 shore/2 Walze gelasert, Stärke Gummierung min-max mm: 10-80, Dosierwalze verchromt: yes, Dosierwalzen Gleich und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-20, kW - Leistung Dosierwalze: 1,5, Durchmesser Dosierwalze mm: 175, Attachment bracket roller: yes, rbakel: yes, Separate Lackheizung: yes ...

• For banding bottles or folding boxes • 90° infeed • Grouping by translator • Bottle infeed with 2 screws (adjustable to each other) for shaped bottles, grouped from single infeed lengthwise to 6x crosswise • With 2 format screws for shaped bottles 63.5 x 32.5 x 108 mm and 67 x 38.5 x 114 mm • Folding box infeed conveyor • Translator with one gripper each for bottle and one suction plate for folding boxes • for PE film • film width 30 - 450 mm • film thickness 0,025 - 0,1 mm • Roll diam. max. 320 mm • Output max. 50 cycles/min (packs/min), format/product-dependent • Format range product 30-100 x 30-100 x 60-250 mm [L x W x H] / pack 30-300 x 60-380 x 60-250 mm [L x W x H]. • Film splicer for automatic film change without machine stop • Machine control Siemens S7-300 • Control system drives Schneider PacDrive 3 • 400V/50Hz/22kW/31,4A

2 pcs ESKA TRPa Roller Paternoster for Floor Coverings and Fabric Products Manufacturer: ESKA Lager- und Verladesysteme Schneider & Kossatz GmbH Type: TRPa Year of construction: 1993 Quantity: 2 pcs. Capacity: 12 Total load: 3000 kg Height: 3.80 m Width: 5.75 m Depth: 1.00 m Suitable for rolls up to 5 m wide

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Forming, filling and sealing machine for yoghurt cups Original ERCA packaging machine (FFS - forming, filling, sealing) type RK3. This machine was reconditioned in 1998 by the company CMA. Nominal output: 21,000 pots per hour. It is equipped with a decoration unit. A cutting tool for standard 63x63 mm cups with two formats X4 and X6. Heating is by radiation. The automaton is a series 7 from Schneider. Out of production : 2017 The machine is complete and in good condition.

- Spare part: comes from a machining center BJM type ALBZ-145 -Servo motor: Manufacturer SchneiderType N065 / 2DC024V-038FCAN00 -Max. Speed: 107 rpm -Torque motor: 5.8 Nm -Number: 2x units available -Price: complete -Dimensions: piece 325/245 / H860 mm -Weight: 180 kg complete

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°

Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...

Automatic EPS pre-expander This listing includes : 1. Automatic EPS batch type Pre-Expander - Density:7~30kg/m3 - Touch Screen Panel –SCHNEIDER - PLC System –SCHNEIDER - Screw Conveyor and Fluid Drying Bed Model: PSF90 Barrel Diameter: 900mm Effective Volume: 0.6M³ Steam Pressure: 0.4-0.5Mpa Compressed Air Pressure: 0.6-0.8Mpa Production Capacity: 10g/l=100kg/h, 15g/l=200kg/h, 20g/l=330kg/h, 30g/l=400kg/h Foaming Density: 8-30KgKg/m³ Density Tolerance: ≤3% Installed Power: 4.5kw External Dimensions: 1600 x 1900 x 2500mm Installed Weight: 1000kg Other Features : - Chromeplate makes non-adhesion of the bearing. - The solid bearing is made of heated steel. - The heating treatment bring the steel a high strength, non-deformation and high resistance to the expansive force from high-density products. - Density:7~30kg/m3 - Density tolerance: no more than 5%  ...

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

Edelstahl Kreiselpumpe More then 300 machines new and second hand on our seema .de

Table dimensions: 1000 x 1000 mm table load: 4000 Kg swivelling range: 105 Grad turning speeds: 0,15 - 1,5 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 8000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection) ...

Table dimensions: 1200 x 1200 mm table load: 10000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 20000 Nm total power requirement: 12,1 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protecti ...

Table dimensions: 1000 x 1000 mm table load: 2500 Kg swivelling range: 105 Grad turning speeds: 0,15 - 2,0 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 700 Ampere max. torque on the faceplate: 5000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)  ...

Table dimensions: 1200 x 1200 mm table load: 7000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 14000 Nm total power requirement: 8,2 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection ...

Key data: 2400 , 400

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

FU 1600 SERVO 1600x500 Console Metal Milling Machine, Industrial Universal Multi-Purpose Cantilever Drilling Milling Machine FU 1600 SERVO 1600x500 Console Metal Milling Machine, Industrial Universal Multi-Purpose Cantilever Drilling Milling Machine Professional metal milling machine FU 1600 SERVO - available from stock! We present to you a professional, versatile, multi-purpose metal milling machine FU 1600 SERVO. The universal, industrial milling machine FU 1600 SERVO is a large, solid and stable machine, which, thanks to its precision and reliability, is designed for professional metalworking in both large and medium-sized enterprises, and thus satisfies even the most demanding customers. The professional FU 1600 Servo milling machine meets all safety and quality requirements. Brand: VIBER-SYSTEM Model: FU 1600 SERVO Table size: 1600x500mm Table load: up to 1800 kg Nu ...

EDDA packing machine, packing machine, pallet machine, WRAPTOR 1500 wrapping machine EDDA horizontal wrappers are recognized as the best solution in the field of packaging. Modern horizontal wrappers based on the latest technologies, thanks to their strong mechanical construction and the required systems ensuring operator safety, meet EU requirements and are CE certified. Standard control system components come from top brands such as Siemens, Schneider and LG Industrial. The machines are designed for a long service life and do not contain any parts from the Far East. Edda wrappers are designed for packing products in PE bubble wrap, PE foam film and shrink wrap. The WRAPTOR 1500 horizontal wrapper is ideal for wrapping: Pallets and cartons (packages) General data: Table diameter - 1500 mm Table rotation speed - 4-12 rpm. Power supply - 220/230 V AC Motor power ...