schleif maschine used for sale

Wash waw LC40 with raetzmuehle RM40 for belt presses EBP500, EBP650 and EBP820 nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A 000 mm width 700 mm Hehe 2400 mm He he Assumption 800 mm Weight 285 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inner Connection for washingHeight mash release 1500 mm Height fruit delivery 800 mm 9mm and 12mm Cutting sieve ; New machine - best condition

Rated power 3000 up to 8000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3570 mm width 980 mm High sof 2570 mm 490 kg material 1.4301 / AISI 304 Connection for cleaning HD M22 x 1.5 or G 1/2 Ag connection for washing room 1/2 outside He he mash release 1460 - 1620 mm Height fruit delivery 1460 - 1620 mm ; New machine - best addition

Rated power: up to 2000 kg/h bust contact length: 2x2 m Contact time: 5 - 50 sec. Engine power: 1.5 (2.0) kW (PS) Electrical connection: 220V 50Hz (1 phase) Electrical fuse: 16 A Plug type: F (=SCHUKO) Dimensions: Laenge: 2 6 70 mm width: 825 mm Height: 1 400 mm Weight: 350 kg High fruit acceptance: 840 mm High fruit ejection: 700 mm Fresh water connection: 3/4 ; New machine - best condition

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

The pasteurizer is available with a bottle filler or bag-in-box filling device. Nennpower l/h 180 l/h Electrical power 18 kW Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A width 440 mm Height 1580 mm Weight 43 kg material 1.4301 / AISI 304 Water content 100 l Juice supply 65 l 2 bottle filling valves or filling device for bag in box ; New machine - best condition

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 160i-MB Operating hours: 0 Technical data Number of axis simultaneous: 5 Table length: 500 mm Table width: 145 mm X axis: 380 mm Y axis: 300 mm Z axis: 280 mm grinding diameter: 240 mm Grinding-wheel diameter: 50 - 250 mm A axis (grinding head rotaion): 360 ° C axis (tool rotaion): 210 ° Resolution: 0.0001 ° Spindle nose: HSK: 50 Grinding spindle speeds: stepless from: 50 rpm up to: 10000 rpm Max forwarding speed: 20 m/min Max. forwarding speed cross: 5 m/min Max forwarding speed vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 9 kW Total power required: 27 kVA Machine´s weight about: 8000 kg Overall dimensions machine: Length: 2270 mm Width: 1700 mm Height: 2260 mm Various accessories: 3D measuring feeler gauge Set of collets Set of flanges Set of ...

Rated power l/h 350 l/h Laenge 600 mm width 500 mm Height 1600 mm weight 30 kg material 1.4301 / AISI 304 ; New machine - best condition

Rated power l/h 550 l/h Laenge 900 mm width 500 mm Height 1700 mm weight 40 kg material 1.4301 / AISI 304 ; New machine - best condition

Hammer muehle with blower, filler hopper and easily changeable sieves for the wuenschte fineness of the grinding material. Hammermuehle KH3 11 kW

The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and  ...

two different models available: PA300E = electric pasteur with tube heat exchanger. PA300EA = electric pasteur with tube heat exchanger and automatic temperature control. Rated power l/h 300 l/h Electrical power 27 kW Electrical connection 400V 50Hz (3 phases) Electrical fuse min. 40 A Laenge 750 mm width 500 mm He he 1150 mm Weight 100 kg material 1.4301 / AISI 304 Water content 35 l ; New machine - best condition

This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 750 l/h power heating heater / oil boiler 70 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 450 kg Gas consumption flu acetic gas 5.5 kg/hr. Gas consumption natural gas natural gas 7.5 m3/hr. ; New machine - best condition

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...

Pasteurizer with tube heat exchanger Nominal capacity 400 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 35 kW Electrical rating 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,400 mm Width 900 mm Height 1,850 mm Weight (heating circuit drained) 330 kg Weight (heating circuit filled) 430 kg Heating oil consumption approx. 4 litres/h Max. exhaust temperature 180°C Noise level (LW, A) 83 dB ; new machine - top condition

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 600 l/h power heating heater / oil boiler 55 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Oil consumption 6 kg/hr ; New machine - best condition

- for grinding saemary cereals different models: Hammermuehle KH1 - 5.5kW Hammermuehle KH2 - 7.5kW

CNC gest. Portal grinding and polishing machine make HAU-SIMEX-RAPACK type FlexomatMachine -No: 88/08/30/2271 built in 1988Technical specifications:AXIS 1Longitudinal axis, horizontal X: 1100 mmTravel speed: 250 mm / secAXIS 2Transverse axis, horizontal Y: 510 mmTravel speed: 250 mm / selAXIS 3Vertical axis Z: 475 mmTravel speed: 190 mm / secAXIS 4Rotation axis, travel range: 210 °around the Z axis =: UTravel speed: 5.4 rpmAXIS 5Rotation axis, travel range: 360 °around the Y axis =: VTravel speed: 22 rpmAXIS 6Rotation axis, travel range: 360 °around the X axis =: WTravel speed: 22 rpmClamping force of the basic clamping device: 700 NExpansion shaft for workpiece: 50 mmNumber of milling units: 2Type of belt grinder: MSF 355Sanding belt size: 3500 x 100 mmContact disc size: 250-500 x 100 x 35 mmDrive power: 4.0 kWSpindle speed: 900-4350 rpm.Working height: 1000 mmExternal dimensions d.  ...

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Engine power 4.0 (5.2) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 875 mm width 735 mm Height 1410 mm Weight 55 kg material Steel painted Hoehe ejection in 450 mm ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 530 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Table area: 502 x 502 mm Ram area: 530 x 500 mm Length: 1600 mm Depth: 1200 mm Height: 2300 mm Weight: 2 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

Manufacturer: SHW Machine Tools Type: UF 21 Routes X,Y, Z: 1000, 600, 625mm Control: Heidenhain TNC 155 Table: Folding table 1000 x 630 mm Automatic swivel head Pinole 120mm Milling spindle holder SK 40 Speed 2500rpm Overhaul 2016 Partial overhaul 2022 About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Rated power: up to 400 l/h (80C pasteurtemp., 10C input temp. Juice) Thermal power: approx. 35 kW Electrical power: 1.4 kW Electrical connection: 230V 50Hz (1 phase) Electrical fuse: 16 A Laenge: 910 mm Width: 960 mm Height: 1850 mm weightweight (heating circuit emptied):260 kg weight (heating circuit filled): 360 kg Heating heater consumption: approx. 3.5 liters/h exhaust gas connection: 150mm Max. Exhaust temperature: 180C sound power level (LW, A): 83dB; New machine - top condition

Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Contact: 01722894884 infoweyrauch-maschinen.com Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing syst ...

Bag-in-box filling - also with 6-digit row filler available nominal power l/h 750 (at 10l bags) l/h Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 1030 mm Width 7 40 mm Height 1065 mm Weight 85 kg material 1.4301 / AISI 304 Filling accuracy of 0.5% compressed air connection 6 bar connection for juice supply 21.3 Juice storage capacity 58 l Supplied incl. cleaning adapter ; New machine - best condition

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ \" Connection for juice outlet 1¼ \" ; new machine - top condition

Aluminium format slide (anodized) with hardened Steel guide rods. Non-return protection at thickness planer. Anodized parallel fence with micrometric fine adjustment. Inclined adjustment of the saw blade up to 45° by means of a hand wheel. Table opening ø190 mm with undercounter extraction. Milling stop 180 mm. Built-in milling spindle lock. Layout table with telescopic stop, Eccentric clamp, degree grid made in EU ! Dressing unit: Table width 410 mm Table length 1800 mm Planer shaft diameter 100 mm Number of planing knives 4 pieces Shaft speed 5000 Motor output power 5 kW S6 400V (4kW S1) Thickness unit: Thickness passage, min/max 4 - 230 mm Feed speed 7m/min Milling machine: Usable length of the spindle 125 mm Spindle height adjustment 160 mm tool diameter for profiling 180 mm for tenon cutting 250 mm Spindle speed 8000/6000/3500/1400 Table openings 1 ...

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

capacity 1 500 l/h power 4,0 (5,44) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 800 mm height 1 750 mm weight 1 000 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery centrifugal pump ; new machine - top condition