schaublin 130 used for sale

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,304.4 mm Center-center hole: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Model: M130 The machine is massive, made entirely of stainless steel. Equipped with a protective cover on the neck and on the receiving hopper. The neck is massive, cast with spiral grooves. The tool set of the machine consists of a large working auger, a massive nut, knives with a cast plate Robot C4 - 2 pcs., kidneys - 2 pcs., grids of sizes: 3,4,5,5,7-8, 10 and 13 mm. , distance sleeve - 2 pcs., Mercedes - fixing sleeve The machine is extremely reliable. The electrical components and bearings used in the machine are of leading global brands. Powerful motor – 8 kW, built into the machine. There is an additional lever for automatic extraction and easy disassembly of the tools. Technical data: - neck diameter: 130 mm. – capacity of the receiving hopper 65 l. – 2 auger speeds – 5 cutting tools The machine is patented and has a CE ...

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

pressure: 200 t stroke: 400 mm daylight longitudinal/sideways: 1300 /450 mm dayligth: 900 mm tank capacity: 75 l liter capacity: 22 l feed down: 6,9 mm/sec feed up: 12,6 mm/sec Motor output: 7,5 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,0 x 0,75 x 2,8 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 4 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Synchronous motor, MDD115C-N-015-N2M-130GB2, R911262637, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. - Permanent magnet motor - max 75 Nm - max. 64 A - 55 kg 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies wit ...

: 3,0 mm ST 40 : 2,0 mm VA : 90° Grad blade length: 130 x 130 mm table:: 600 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 170 kg range L-W-H: 630 x 660 x 1270 mm Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe The data for this ad was created with ModulMWS - the sof ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2008. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 119x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.319/10.50.353.591 T3, D50mm, total length of the screw approx. 591mm, thread  ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with small traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator,181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.339/10.63.1033.1276 P3, D63mm, total length of the screw approx. 1276mm ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with minor traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator, 181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc. ball screw 1516.339/10.63.1033.1276 P3, Fa. Steinmeyer, D63mm, total length of the screw ap ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 169x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.310/10.63.848.1091 P3 D63mm, total length of the screw approx. 1090mm, thread ...

Sychron motor with ball screw, MDD112D-N-030-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 185x26x28cm, ca. 250kg, consisting of: - 1 pc Sychnron motor MDD112D-N-030-N2M-130GB2, R911260224, from Rexroth, permanent magnet motor, max. 75Nm, 3000rpm, 62kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.78/10.80.910.1189 P3 D80mm, total length of the screw approx. 1189mm, thread  ...

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

Uhlmann C130 horizontal cartoning machine - fully automatic bottle packaging and simultaneous feeding of Package leaflets - power 100 FS/min - product dependent - Bottle length max. 150 mm Format: L= 70 x 150mm W= 30 x 90mm H= 15 x 85mm mechanically overhauled - GUK brochure folder 4-fold folding . Argus 6012Code Reader - Luminizer control, attendance check for package inserts in folding boxes - Embossing station - Brochure pre-insertion - Vacuum pump / venturi nozzle Optional - Cognex 1D barcode and 2D matrix code reading system for leaflets and carton code - New hardware and software PLC Mitsubishi control and 8 inch color touch panel

spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2500 mm z-travel: 1050 mm w-axis: 1000 mm Radial face slide diameter: 800 mm radial face slide travel: 240 mm table surface area: 1800x2000 mm turning speeds: 4,8-900 U/min workpiece weight: 8000 kg faceplate speeds from - to: 4,5-180 U/min Feed: 5-2000 mm/min threading: total power requirement: 40 kW weight of the machine ca.: 37 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic filter suitable for JONES - SHIPMAN, Model 1300, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.

floor-plate length: 2500 mm floor-plate width: 1300 mm floor-plate height: 300 mm weight of the machine ca.: 2800 kg Details: Table length 2500 mm Table width 1300 mm Table height 300 mm Machine weight approx. 2800 kg Space requirement approx. 3 X 2 with underframe approx. 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain TNC 355 x-travel: 1.000 mm y-travel: 400 mm z-travel: 450 mm surface area: 1.300 x 400 mm feed range: 1 - 6.000 mm/min number of spindle speeds: 60 - 3.600 U/min vertikal number of spindle speeds: 30 - 1.800 U/min horizonta spindle taper: SK50 vertical and horizontal milling possible: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,5 mm roll diameter: 120 mm : 1300 engine output: 2,2 kW weight of the machine ca.: 660 kg Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers heavy duty welded steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1300 mm plate thickness: 1,5 mm roll diameter: 75 mm min. dia.: 85 mm engine output: 0,75 kW weight of the machine ca.: 420 kg Electric roller. Foot control. Heavy duty welded robust construction. Back roller can be adjusted for conical bending. Upper roller can be turned away for easy removal of the work piece. Comfortable operation and both hands free. For workshops and handicraft. with foot pedal (forward, backward) made of cast iron back roller adjustable by hand wheel lower roller adjustable by handle, eccentric safety cord with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

DIRECTLY FROM THE PRINT SHOP Offer consisting of: Heidelberg Perfect Binder Eurobind 1300 PUR-D 4-pliers perfect binder, glue type PUR-D - Short set-up times due to high automation - thin and precise glue application due to nozzle application system -Touchscreen Specifications: - Capacity: 1300 cycles/h -Sizes: Block height: 145-360mm Block width: 120-300mm Block thickness: 2-45mm Grammage: 60-170g/sqm Envelope width: 242-680mm Envelope height: 145-370mm - Envelope grammage: 120-300g/sqm - Milling depth/ adjustable: 0.3mm -Energy requirement: Perfect binder: 400V +/-5%, 50 Hz, 3ph+N+PE/ 20A/ 9,9kW Glue vapor extraction: 400V, 50Hz, 3ph+PE/ 16A/ 1.5kW PUR Premelter: 400V, 50Hz, 3ph+N+PE/ 32A/10kW -Metrics: Bookbinding: Length, closed hood: 4085mm Length, open hood: 4230mm Width, closed hood: 2275mm Width, open hood: 2500mm Height, closed hood ...

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you here a used Balancing plate of the manufacturer Polypal for purchase. Included in delivery are: 01x Balancing plate, used Manufacturer: Polypal Type: SKPU Material color: sendzimir galvanized Dimensions: approx. 130 x 85 mm Thickness: approx. 1.25 mm Weight/pcs.: 0,119 kg

Printshop Package from one Location: CTP Manufacturer: Luescher Model: CTP 130 Xpose! year: 2005 Condition: The machine is in a good condition. The machine in not in use since 2 years, but under power. Location: romania Price: on request Manufacturer: O.V.I.T. Model: Mizar 85TH year: 2009 Location: romania Price: on request

plate width: 1000 mm plate depth: 1300 mm plate height: 250 mm Plate width: 1000mm Plate depth: 1300mm Plate height: 250mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump KSB

CATALOG NO. 6887 TECHNICAL SPECIFICATIONS - track width 340mm - shaft width 350mm - max disc diameter 400mm - blade bore diameter 70mm - max cutting height 130mm in advance: - 2 rows of ratchets - 2 smooth pressure shafts, slip shafts -Pressure - shaft with saws - 2 smooth pressure shafts, slip shafts from below: -Guide -Triggers -caterpillar - smooth regulation of feed speed - electric body lifting - main engine 37kW - feed motor 1,5kW - central lubrication - table top dimension 1930x840mm - dimensions length / width / height 2250x1650x1600mm - weight 2900kg – Italian production – used multi-saw – very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Inv. Num. : 5652 Type: MD6-RE60.1300 Producer: LC CATTANEO Created: 2014 Parameters: Maximum sheet metal plate width: 1300 mm Maximum sheet thickness (ordinary steel): 0.8-3 mm speed: 60 m/min Height adjustment from the ground: 990-1360 mm

Code: 0108 Brand: CENTAURO Model: T3-130 Hydraulic copying lathe for wood, stairs, frames, chairs, tables, etc. Automatic cycle turning system with one copier programmable to perform one or two passes Hydraulic copying unit with touch probe Max distance between centres mm 1300 Height of centres on pallet mm 226 Max diameter mm 250 Tailstock sleeve diameter mm 60 Tailstock sleeve stroke mm 100 Carriage feed speed mt/min 0/6 Carriage return speed mt/min 7,33 Spindle rotation speed rpm 900/1500/1800/2250/3000/4500 Spindle motor power Hp 5 Installed power Kw 4,8 Overall dimensions mm 3520 x 1190 x 1680 h Weight kg 1000

2 Side Rotary creasing and slotting Machine, series 69175/60, Max: 1300mm, Min: 135x80mm, 100m./minute

(series 5310) 2 Side Rotary creasing and slotting Machine, Max: 1300mm, Min: 135x80mm, 100m./minute Year: ca. 1961

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

Power: 8,3 kW - Amperage: 67 A - Voltage: 124V. DC - 100% ED Magnet L x W: 1.406 x 1.350 mm - Conveyor belt: 1.400 mm - AA.: Ca. 2.300 mm - With Transformer rectifier of 380V. Primary

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

Power: 14 kW - Amperage: 63,58 A - Voltage: 220V. DC - 100% ED Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360 mm - Conveyor belt: 1.400 mm - AA.: Ca. 2.900 mm - With Transformer rectifier of 380V. Primary

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Machine vise, sturdy vise, drill vise -Jaw width: 215 mm -Clamping depth: max. 130 mm -Dimensions: 550/220/H125 mm -Weight: 50 kg

Machine vise, sturdy vise, drill vise -Bake extra long support -Jaw width: 400 mm -Clamping depth: max. 130 mm -Weight: 40 kg