We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Inv. Num. : 4003 Type: FB 100 S Producer: SCHARMANN Created: 1969 Parameters: Digital display range: NEVAL C 80 Digital Measurement: Rod Runner NEVAL Work table length: 1100 mm Work table width: 950 mm X-axis travel: 1000 mm Y-axis travel: 1045 mm Z-axis travel: 1000 mm Machine height: 2555 mm Machine length: 4285 mm Machine width: 2915 mm Machine weight: 17 t
used
Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos
used
SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently
used
Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, Year of construction 1983 / Retrofit 2015 by Scharmann Control Siemens 840 D, Travel X/Y/Z/W 2000/1450/1400/600 mm, Table clamping surface 120 x 1600 mm, Enclosure open at the top installed in 2015, Feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, Machine does not need a foundation ! due to the self-designed polymer bed, max workpiece weight 12,000 kg, Machine weight 24,350 kg, complete documentation, Additional equipment: A CNC-controlled face plate is integrated in the drill quill. With this device, contours up to Ø600 can be rotated Services provided during retrofitting The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced and the control system was ...
used
Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003
used
Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck
used
Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg
used
Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW
used
spindle diameter:125 mm x-travel:5600 mm y-travel:1600 mm z-travel:800 mm spindle stroke:600 mm spindle taper ISO:50 spindle turning speed range:12 - 3000 U/min spindle drive:40 kW rapid speed:15 m/min total power requirement:65 kW weight of the machine ca.:60 t dimensions of the machine ca.:12,1 x 4,8 x 3,9 m with CNC HEIDENHAIN iTNC 530 modernized in 2003 automatic toolchanger 60 pockets boring table make: RÜCKLE 2000 x 1800 mm max. 20 to. load floor plates 3500 x 2000 and 2500 x 2000 mm coolant attachment
used
X-travel: 2000mm, y-travel: 1450mm, z-travel: 1400mm, quill stroke: 600mm, max. load: 12t, table dimensions: 1250x6000mm, length: 6150mm, width: 5050mm, height: 4430mm, weight: 24.35t, with documentation.
used
Facing slide needs overhauling.
used
Description: Included - 3-axis digital display - Operation manual Spindle diameter 75 mm x-travel 850 mm y-travel 900 mm z-travel 950 mm Spindle holder ISO SK 40 Table size 1000 x 800 mm Total power requirement 16 kW Machine weight approx. 10.5 t Space requirement approx. 4.0 x 2.3 x 2.75 m weight approx.: 10,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,750 mm
used
Description: SPECIFICATIONS Brand: Scharmann Type: FB 80 Digital readout 2-axis digital readout Displacement: X= 1,000 mm, Y= 900 mm, Z=900 mm Table dimension: 1,200 x 1,100 mm Spindle diameter: ø80 mm Take-up: MK 5 Speed: 2,880 rpm Various tools included Machine weight: 9,800 kg Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,800 mm, weight approx.: 9,800 kg
used
Description: SPECIFICATIONS Brand: Scharmann Type: FB 125K Repromat Flat turning stand Digital readout Displacement: X= 1,000 mm, Y= 1,000 mm, Z= 750 mm, B= 750 mm Table dimension: 1,200 x 1,000 mm Spindle diameter: ø125 mm Machine dimensions (L×W×H): 2,900 x 4,200 x 3,000 mm Machine weight 24,500 kg Note! special truck needed weight approx.: 24,500 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 4,200 x 3,000 mm
used
spindle diameter: 75 mm x-travel: 850 mm y-travel: 900 mm z-travel: 950 mm spindle taper ISO: SK 40 table-size: 1000 x 800 mm total power requirement: 16 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 4,0 x 2,3 x 2,75 m Included - 3-axis digital display - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Clamping table, clamping angle, T-slot table, round table, milling machine table, turning table, cross table, cross-sliding table, boring table -Manufacturer: Scharmann, clamping table drilling table rotatable -Table surface: 1400 x 1000 mm -Travel distance: 1200 mm -Grooves: 7 pieces 22 mm -Dimensions: see photo -Total dimensions: 3410/1350/H665 mm -Weight 4600 kg
used
x-travel: 2000 mm y-travel: 2000 mm z-travel: 1400 mm spindle stroke: 1000 mm turning speeds: 5-800 U/min Radial face slide: 700 mm Radial face slide: 2,2-115 U/min spindle taper ISO: 50 table surface area: 2000x1800 mm Table load: 14000 kg total power requirement: 42 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x4,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm total power requirement: kW weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
used
Table length: 3500 mm Table width: 3500 mm Table load: 80 t X - axis stroke: 3500 mm Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Table Length: 3500mm Table Width: 3500mm Table load: 80000 Rotation B-Axis:360000° Length: 6000mm Width: 3500mm Height: 1400mm Weight: 28000kg
used
Table diameter: 3500 mm Table load: 40 t X - axis stroke: 3500 mm Rotary tableSCHARMANN - TDV 40 Transportable rotary indexing table T Jump 250 mm T Size Equipped for crculair milling Seperate control opperator panel Heidenhain digital readout indexing position Table Length: 3500mm Table Width: 3500mm Table load: 40000 Rotation B-Axis:360000° Length: 4800mm Width: 3900mm Height: 930mm Weight: 29000kg
used
diameter: . mm Cutting (quantity): . 0 weight: . kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 6000 mm y-travel: 1750 mm z-travel: 600 mm w-axis: 800 mm spindle taper: SK 50 control: Siemens 8M type: 8M mm table surface area: 1500x1300 mm Table load: . kg turning speeds: . U/min spindle motor: . kW feed: . m/min chip conveyor: coolant: x-travel: mm total power requirement: . kW weight of the machine ca.: 75 t dimensions of the machine ca.: . m Tool magazine: 60 toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of ...
used
used
length: 3000 mm width: 2000 mm number of T-slots: 7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 3800 mm y-travel: 2000 mm z-travel: 670 mm Control: Siemens type: 840 D sl surface area: 3000x1800 mm milling spindle: 120 KW turning speeds: 30.000 U/min tool holder: HSK 63 Tool changer: 124 Pos c-axis: angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mm Control: Siemens 840C Tool changer: 100pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 180 mm x-travel: 8800 mm y-travel: 3500 mm Control: Siemens type: 840 C ram: horizontal adjustment: 970 mm spindle travel: 1200 mm dimension of the ram: 400x400 mm Plate area: 6000x4000 mm rotary table:: Table load: 25000 kg table travel: 1500 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.