scania engine used for sale

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 253.5 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3196-2xr-17736 27-used/642, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 2XR-1773627; Transport weight [kg]: 1290

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 253.5 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3196-2xr-17736 27-used/542, , = More information =, , Type: Engine, Type number: 2XR-1773627; Transport weight [kg]: 1275

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

turning diameter over bed: 370 mm turning diameter over slide rest: 200 mm turning length: 1000 mm centre height: 185 mm spindle bore: 56 mm tailstock quill taper MT: 4 turning speeds: 50 - 2000 U/min power capacity: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/220, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 3302 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1950 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/cummins-nt855-g1-pump-used/58, , = More information =, , Type of fuel: Diesel, Type number: NT855-G1 CPL5820; Transport weight [kg]: 3000

Key data: 600 KW

MTU Diesel Engine Marine Engines Model: 12V 2000 M61 Year of manufacture: 2011 Condition: New Qty: 6 Power: 600 kW Speed: 1800 RPM Mass: 2900 kg

Rexroth MSK050C-0300-NN-M1-UG1-NNNN, R911309706 Servo Motor AC 600V, 1000 rpm Item Condition: New Specifications: 5.0 Nm 3.1 A N(max) 4700 min-1 KE(eff) 109.0 V / 1000 min-1 Km 1.77 Nm/A U(max) AC 600 V H1R6A13K5 1_HS 7 kg More servo motors - new and used - can be found in our shop! International shipping costs on request!

turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rexroth, R911311555 + R911308681, MSK030B-0900-NN-M1-UG0-NNNN, Servo Motor Item condition: Used, in very good condition H1R6A12K34 2_CK You can find more engines - new and used - in our shop! International shipping costs on request!

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

Parker ETB50M10LA57FMA100A Electric Cylinder Manufacturer: Parker Electric Cylinder Type: ETB50M10LA57FMA100A Without servo motor Traces of storage may be present. More items - new and used - can be found in our shop! International shipping costs on request!

Jenbacher 320 refurbished cylinder heads are available. 18 pcs - Quantity For pricing and information, contact us today to get a quote.

Jenbacher J320 Shortblock En excelente estado. Nuevos cojinetes principales y cojinetes de bielas Camisas de cilindros, pistones y árbol de levas incluidos Opción de incluir culatas y componentes adicionales según la preferencia del comprador Listo para montaje y uso. Fotos adjuntas. ¡Contacta para más detalles! Cogeneración Técnica Energética ctenergetica.com +34 674945249

greates pass round over bed: 540 mm swing diameter over face slide: 370 mm centre distance: 3000 mm centre height: 270 mm turning dia. in gap: 815 mm bed width: 344 mm spindle bore: 88 mm spindle diameter in front bearing: 133 mm spindle taper: 11 D1 Camlock turning speed range: 18-1400 U/min turning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mm face feeds: 0,03-0,5 mm metric threading: 0,4-14 mm inch threading: 2-72 G/1 thread - module: 0,3-3,5 mm thread - DP: 8-60 Pitch tailstock quill diameter: 75 mm quill stroke: 230 mm taper of tail spindle: MK 5 slide valve travel: 280 mm upper head travel: 150 mm Overall size: ca. 4700 x 1100 x 1400 mm weight: ca. 3200 kg power capacity: 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rea ...

We sell 9 new gas engines, zero engine hours. Power as follows described Sale due to going out of business. 2 engines 38 kW - WJPower HMG 320 - SAE 3 2 engines 56 kW – WJPower HMG 434 - SAE 3 3 engines 85 kW – WJPower HMG 634 - SAE 2 2 engines 100 kW – WJPower HMG 645 - SAE 2

Dutchi DM1 160 M4 electric motor with 11 kW and 1440 rpm at 50 Hz and 13.2 kW and 1730 rpm at 60 Hz, sizes: 600x320x430 mm (LxWxH), weight: 113 kg;

Key data: 1064 1/min

3 X JENBACHER J320 SHORTBLOCK 60000 HOURS (STD) NEW MAIN BEARINGS (1231308) NEW CONNECTING ROD BEARINGS (113611) OPTION TO INCLUDE PISTONS, CYLINDER HEADS OR ANY ADDITIONAL PARTS POSSIBLE OFFER FOR INSTALLATION AT YOUR FACILITIES AVAILABLE IN 3 MONTHS CONTACT US FOR MORE DETAILS Cogeneración Técnica Energética ctenergetica.com +34 674945249

Please refer to Fig. 2 for technical data

Key data: 635 KW

New Mitsubishi Marine Engines. Mitsubishi S6R MPTAW-4 , 635Kw1800rpm auxilairy [ 2022 ] un used. Mitsubishi S6R Z3 MPTAW-4 , 635Kw1800rpm auxilairy [ 2019 ] un used. Mitsubishi S16R-2 T2 MPTAW-3 , 1450Kw1350rpm propulsion [ 2018 ] unused. All engines have only type approval All engines are unused and stored properly as required by the manufacturer. Manuals and the primary filter set are present. S6R Engines have a Woodard Pro Act and a 2301E control box. S16R-2 is provided with a Woodward PSG governor.

Please refer to Fig. 2 for technical data

Please refer to Fig. 2 for technical data

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

FOR SALE PIELSTICK 12PA1854 900 KVA FUEL

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!

Make: MAN Model: D2876LE423 Engine type: Four Stroke Direct Injection Cylinders: 6 Output: 588 kW Speed: 2300 rpm Mfg year: 2013 Condition: New and Unused.

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Key data: 1320 KW, 1800 1/min

Due to new engines, this MTU type 12V4000 M60 and the Reintjes gearbox type WAF 763L with a rating of 5,750: 1 half May 2026 is available. The shooting hours is dan Umnabei 64.000 Cylinder head overhauled at 30,000 hours of filming

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 28,330

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 18,701

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

1 -NO EXCHANGE cylinder head (overhauled) type 3 Jenbacher. cod. 9016986 Already overhauled and ready to use 2 -reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. 9016986 In this case you will have to return the used cylinder head to us. = 700 € CAD. EMAIL: administration@punto4srl

Engine type: Petrol, V-shaped, 8-cylinder. Power: Usually around 150 horsepower. Application: Used on ZIL-130 and ZIL-131 trucks. There are also other engines from tractors and trucks of Soviet production

There are also other engines from tractors and trucks of Soviet production

Key data: 1140 KW, 2250 1/min

Used MTU 16V2000 M72 – Port Side – Available Now Well-maintained MTU 16V2000 M72 marine engine from 2013 and strong remaining lifetime. A reliable high‑performance choice for shipowners, operators, and shipyards seeking a proven propulsion solution. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 111 995 Configuration: Port Side Year of Manufacture: 2013 Power Output: 1440 kW Rated Speed: 2250 rpm Weight: 3550 kg Operating Hours & Service Status Total operating hours: 31,427 h (as of 12/2023) QL4 major service completed: 09/2022 at 26,537 h Remaining hours before QL3 service: approx. 1,100 h TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is dry, complete, and in good technical condition. It has been operated in a professional environment with continuous maintenance and is ready for inspection and quick delivery. Key Advanta ...

We offer new parts for sale for Yanmar Motor 3TNV88F (electronic regulator): All prices per piece in Euro plus freight+plus tax available from stock 1xECU unit NEW 129017-75040 net 750,- 1xCrankshaft NEW 129008-21000 net 750,- 1xOil pump NEW 129001-32002 net 250,- 1x Exhaust muffler with manifold net 300,- Many more new parts available on request at MIW GmbH Engine Repair Plant Nord-West-Ring 8 D-27404 Zeven-Germany Phone:0049(0) 4281-950583 Mail:infomiw-zeven.de

Key data: 1140 KW, 2250 1/min

Used MTU 16V2000 M72 – Starboard Side – Available Now Reliable and well‑maintained MTU 16V2000 M72 marine engine recent QL3 overhaul with minimal operating hours since. A strong option for shipowners, operators, or shipyards looking for a robust and ready‑to‑install propulsion engine. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 110 966 Configuration: Starboard Side Year of Manufacture: 2013 (visible on nameplate) Weight: 3560 kg Operating Hours & Service Status Total operating hours: 28,597 h (as of 12/2023) QL4 major service completed: 03/2022 QL3 overhaul completed: 10/2023 Running hours since QL3: Very few TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is complete, dry, and in excellent technical condition due to the recent QL3 overhaul and minimal runtime afterward. Ready for inspection and immediate delivery. Ke ...

Key data: 1140 KW, 2250 1/min

Engine disassembled. Block and crank shaft damage. Can be sold in single part or all parts.

Key data: 1000 KW, 1800 1/min

Cummins K38‑M marine diesel engine, Engine No. 26433858, manufactured 16/03/2018, built to CPL 4291 and Rating No. 5376382. The engine is recently overhauled and has 9000 operating hours, offering a reliable 38‑liter V‑configuration with mechanical PT‑fuel system and robust continuous‑duty marine performance.

Key data: 1000 KW, 1800 1/min

New. Located at Cummies dealer in Esbjerg, thus no photos.

trailer with 3 Cummins generators 300 kva 180 kva 60 kva

turning diameter over bed: 430 mm turning diameter over slide rest: 230 mm turning length: 1000 mm centre height: 215 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 19 - 2000 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,9 t dimensions of machine L x W x H: 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW spindle turning speed - stepless: 30-3000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France