141,784 used machines on RESALE, but how to find them? Machine Search
Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg
Key data: 1200 KW
Jenbacher Gas engine [JMS 416GS] available in dismantled condition, ready to be loaded. Specifications: - Type: J416 GS - mfy: 2012 - Power: 1222kW - Fuel: Biogas - Frequency: 50Hz - Alternator rating: 1870kva - Overhaul done at 30000 and 60000 hours. - Mass: 13550kg - Service Log book and maintenance manual available - Accessories: Control Panel, Gas line, Heat exchanger, pumps.
Key data: 1200 KW
Output power 1286 kw Voltage 400 V Frequency 50 Hz Generator Stamford , Base rating 1416 kw
Key data: 7 KW, 1500 1/min
used, comes from a fully functional plant Model: aiI 12/7000 Type: A06B-1408-B103 Year of manufacture: 03/2006 S1 11 kW / 1500 - 6000 rpm / max. 54 A 7.5 kW / 7000 rpm S2 30min S3 60 15 kW / 1500 - 6000 rpm / max. 64 A 11 kW / 7000 rpm Space requirement LxWxH: 620 x 350 x 300 m
Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg
Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m
Key data: 95 KW, 1500 1/min
DEUTZ BF6M-1013 Engine, 7.2 L Diesel, 95 KW, 1500 rpm engine, 6 cylinder diesel, German Machine, Year 2003 - Engine was built into generator. Since the generator is defective the engine is sold. Engine runs very well, - Video available
Motor Control, Servo Control GOULD, GETTYS N360 N360-10041 Spare part for Toyoda HES52 ! used ! Dimensions: 240 x 130 x 265 mm
Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW
pneumatic reciprocating engine, pneumatic motor FESTO stroke: 80 mm piston Ø approx. 250 mm rod: Ø 32 mm (reverse piston pump principle) control valve J-5/2-D3 C 151865 New !' Dimensions: 345 x 275 x 395 mm
Engine Brand: VOLVO, Conditie: USED, Engine Injection Type: DIRECT POMPVERSTUIVER , Bore: 131 mm, Stroke: 150 mm, Engine Capacity: 12100 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: Ja , Starter Voltage: 24 Volt , Rated Power: 331 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d12d-c-mh-used/22391 , , = More information =, , Type: Engine, Type number: D12D-C MH; Transport weight [kg]: 2000
; Power [PS]: 245; Gross weight [kg]: 1100; Engine: CATERPILLAR C6.6; Engine displacement [cm³]: 6600
Cooling fan for engine brake, external fan LENZE A 29130 motor: 0.048 kW 220 / 380 V Inner diameter: Ø 154 mm New ! Dimensions: 156 x 205 x 156 mm
Engine Brand: VOLVO, Conditie: USED, Engine Injection Type: DIRECT POMPVERSTUIVER , Bore: 131 mm, Stroke: 150 mm, Engine Capacity: 12100 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 331 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d12d-b-mh-used/22390 , , = More information =, , Type: Engine, Type number: D12D-B MH; Transport weight [kg]: 2000
Complete reconditioned Cummins K200E engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
maximum number of results exceeded
please refine your search
