We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,080 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price
new
Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
new
Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE ...
new
Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...
used
Automatic action Checkweigher OCS model EC Year of construction: 2003 Weighing cell: 3000 Control measurement: up to 1,500 g Temperature: from + 5 °C up to 40 °C Power: 115/230 V/50 Hz Scale range e = 0.2/0.5/1.0 g Scale range d = 0.1/0.2/0.5 g Including PCE YEAR 2010 Datamatrix station: Power: 230 V - 50 Hz Air supply: 6 - 8 bar.
used
Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used Alpine wet agitated ball mill 90 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close cir ...
used
ULMA Super Chik, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out tray. • Gravity and motorized exit conveyors: in line, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centering device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethylene and poly ...
used
Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions: ...
used
Mixing tank, 1000 ltr., with pump and filling line up to 15 kg for cans/canisters/hobocks Manufacturer: J VREE, Antwerp, Product contacted stainless steel, complete ex shop, scale mechanical 1:1 ------- Mixing Vessel, 1000 ltr., with Pump and Filling Unit up to 15 kg for Canister/Can/Hobocks Made by J.De Vree, Antwerp, in touch with Product Stainless Stell, complete Ex Proof, Scale mecanical 1:1
used
Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions: ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close ci ...
used
Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-GC Operating hours: 30291 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 32 mm Bore: 127 mm max. grinding wheel width: 50 mm Grinding wheel speeds: number (steps): 3 from: 1600 rpm up to: 2200 rpm Peripheral speed: 35 m/s Rotatable grinding spindle head (b-axis): 30 ° Longitudinal slide: Max. travel: 420 mm Max. grinding length: 400 mm Resolution of the scale: 0.0001 mm Feed range: 0.001 - 10000 mm/min Transversal slide: Max. travel: 150 mm Resolution of the scale: 0.001 mm Feed range: 0.001 - 10000 mm/min Work piece spindle head: speeds: stepless from: 30 rpm up to: 10000 rpm Max. table angular displacement: 15 ° Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 kW Workpiece spindle motor: 1.1 ...
used
: 15-150 m/min capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 60 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW dimensions: 1300 x 2050 x 1400 mm weight: 910 kg Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high ...
new
table length: 3000 mm table width: 1500 mm table height (lateral area): 100 mm weight: 726 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height (lateral area): 200 mm weight: 1374 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - incl. 6x base equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 499 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - incl. 6x base equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic surface grinding machine make ZIERSCH & BALTRUSCH type Formmaster 6/30Make -No: 36BB341, year of construction 1991Technical specifications:Electromagnet Size: 600300mmMax. grinding area: 650 x 300 mmelectromechanical transverse movement:300 mmTable clamping area: 650 x 250 mmgr. Distance between table surface and center of grinding spindle: 600 mmMax. table load: 300 kgGrinding wheel dimensions :400 x 40 mmLongitudinal table movement (X-axis): 840 mmLongitudinal table movement (X-axis) hydr. continuously adjustable: 2 - 35 m/minTable traverse movement (Z-axis): 310 mmTable cross movement by hand wheel, scale division: 0.025 mm 1 revolution = feed: 5 mm Fine feed Scale division: 0.005 mmTable transverse movement (Z-axis) automatically steplessly adjustable. line feed: max. 30mm continuous: 10 - 1000 mm/minCross movement rapid traverse: 1000 mm/minVertical movement (Y-axis) hand ...
new
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N angle + 1x 163999 accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1517 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height (lateral area): 100 mm weight: 753 kg Siegmund authorized dealer all articles available! Product description The Professional Extreme 3000x1500x100 mm table has a 50 mm hole arrangement Grid on the table top and a parallel hole arrangement in a 25 mm grid the sides. The holes have a diameter of 16 mm and the table one Material thickness of approx. 11.5-13 mm. The table top is made of hardened Tool steel made. The little stressed sidewalls are made For reasons of cost, still made of steel S355J2 + N. Grid lines at a distance of 50 mm make it easier for you to set up your device. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm ...
new
table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 466 kg Siegmund authorized dealer all articles available! Product description The table Professional 750 2400x1200x100 mm has a hole arrangement in 50 mm Grid on the table top and a parallel hole arrangement in a 25 mm grid the sides. The holes have a diameter of 16 mm. The table has one Material thickness of approx. 11.5-13 mm and is made from high quality steel S355J2 + N manufactured. Grid lines at a distance of 50 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment The data ...
new
table length: 1500 mm table width: 1000 mm table height (lateral area): 100 mm weight: 255 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1518 kg The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 351 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 537 kg The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N angle + 1x 163999 accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 140 mm cutting capacity - round: 240 bei 45° mm work height max.: 945 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 200 bei 45° mm total power requirement: 3,0 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2650 x 2040 x 2050 mm Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both sides in massive housing fitted with pre-stressing tapered roller bearings. Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. Massive arm turning syst ...
new
cutting diameter: 300 mm saw band length: 3150 x 27 x 0,9 mm cutting width: 375 mm band speed: 15 - 90 m/min : 375 x 190 mm cutting capacity - round: 300 bei 90° mm : 240 x 160 mm cutting capacity - round: 240 bei 45° mm work height max.: 910 mm total power requirement: 2,2 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 2180 x 1660 x 2030 mm Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight. Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption. Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts. Simple locking and adjusting of the desired cutting angle on the angle scale. Massive quick-clamping vice ensures easy and reliable mate-rial clamping. Large diameter running wheels and precise three-side hardmetal guiding ...
new
Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5 ...
new
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 981 kg dimensions of the machine ca.: 2400 x 1200 mm Siegmund authorized dealer all articles available! The table Professional Extreme 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in a 50 mm grid on the sides. The holes have a diameter of 28 mm and the table a material thickness of approx. 24.5-27 mm. The table top will be off made of hardened tool steel. The little stressed sidewalls are still made of steel S355J2 + N (St 52/3) for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 ...
new
table length: 2000 mm table width: 1000 mm table height (lateral area): 200 mm weight: 699 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 1069 kg dimensions of the machine ca.: 2400 x 1200 mm Siegmund authorized dealer all articles available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set The data for this ad was created with ModulMWS ...
used
Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for palletising counted sheet. Paper is counted by Bizerba paper scale, straightened and smoothened and in the jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet. However, equipment can also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine, then left standing
used
Key data: 500 mm, 160 mm
Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Cyclomix lab mixer. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Mini Cyclomix lab mixer is a stand-alone, high shear batch mixer with exchangeable product bowls, ...
used
TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis
used
grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...
used
Manesty ? ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP sy ...
new
Sample system of a weigh-counting-scale system for counting small metal or iron parts and packaging them in flat bags. The counting scale system with vertical form, fill and seal machine is suitable for small metal products such as nails, screws, nuts, bolts, washers, etc. The iron and metal products are transported by a magnetic conveyor belt to the weighing and counting system and finally packed in flat pouches.- Specifications of the packaging system: max. speed of the machine in neutral: 8 cycles/minute | bag dimensions: max. L200xW300mm | power: approx. 2kW, 220V, compressed air: 0.2m?/min, 6-8bar. The system can be extended for counting and packing different products into one bag. The specifications shown refer to the sample packaging system. The final machine dimensions and the total price depend on the required packing speed, the products to be packed, the bag dimensions and othe ...
used
Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.
used
Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - 1 row - Shapes: round, oblong (embroidery), ribbon - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - with rotary table - Condition: very good, as new, completely overhauled - 6 months warranty Technical data: - Weight range: 10 - 250 g - Product length: up to 500 mm - Power: 20 - 100 pcs./min. Visits and test runs are possible by arrangement.
used
Cutting length: 4300 mm Cutting height: 2150 mm automatic: , ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length ...
used
TECHNICAL SPECIFICATIONS Manufacturer: AMMANN Designation: Twin-shaft compulsory mixer Type: MB 3.0 Year of construction: 1997 Batch size hardened concrete: 3.0 cbm Batch size fresh concrete: 3.6 cbm Drive power: 2 x 75 kW SPECIFIC COMMENT Incl. associated components: - Cement scale - Aggregate scale - Discharge funnel - Discharge hopper small quantities - Water dosing system
new
turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...
new
turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...
used
amount: 1 measurement- and control device -electronic: von µm bis mm - Indicator TESATRONIC TTD20 with scale display - Compact instrument with scale display and measurement classifications - Switchable between metric and inch measuring system. - Convenient setting of the display by manual zero adjuster - 2 probe connections for single, sum and difference measurements - Indication of the class affiliation of the measured values by luminous diotes, green = GOOD, yellow = Rework, red = Rejects. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
amount: 1 measurement- and control device -electronic: von µm bis mm - Indicator TESATRONIC TTD20 with scale display - Compact instrument with scale display and measurement classifications - Switchable between metric and inch measuring system. - Convenient setting of the display by manual zero adjuster - 2 probe connections for single, sum and difference measurements - Indication of the class affiliation of the measured values by luminous diotes, green = GOOD, yellow = Rework, red = Rejects. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...
new
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 949 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions ...