scale used for sale

Glycerine pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 2 pieces WIKA 0 - 160 bar EN837-1 Measuring range: 0 - 160 bar Ø 63 mm Class: 1,,6 Scale division: 5.0 bar Process connection: G 1/4 B Mounting position: horizontal Connection position: back Material: Housing: 1.4301, Measuring system: Cu alloy, Connection: Brass Other quantities on request ! New ! Dimensions ( pressure gauge ): 63 x 58 x 63 mm

Glycerine pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 2 pieces WIKA 0 - 160 bar EN837-1 Measuring range: 0 - 160 bar Ø 63 mm Class: 1,,6 Scale division: 5.0 bar Process connection: G 1/4 B Mounting position: horizontal Connection position: back Material: Housing: 1.4301, Measuring system: Cu alloy, Connection: Brass Other quantities on request ! New ! Dimensions ( pressure gauge ): 68 x 60 x 68 mm

Chemical pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, Glycerine pressure gauge, WIKA 0 - 100 bar EN837-1 Measuring range: 0 - 100 bar Ø 63 mm Class: 1,,6 Scale division: 5 bar Process connection: G 1/4 B Mounting position: horizontal Connection position: rear Material: Stainless steel ( stainless steel ) Glycerine pressure gauge New ! Dimensions ( pressure gauge ): 64 x 63 x 63 mm

Pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 8 pieces WIKA 0 - 10 bar EN837-1 Measuring range: 0 - 10 bar Ø 40 mm Class: 2,, 5 Scale division: 0.5 bar Process connection: G 1/8 B Mounting position: vertical Connection position: bottom Material: Housing: Plastic, Measuring system and connection: Cu alloy Other quantities on request ! New ! Dimensions ( pressure gauge ): 40 x 59 x 25 mm

Pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 6 pieces TECSIS 0 - 40 bar Measuring range: 0 - 40 bar Ø 40 mm Class: 2,,5 Scale division: 2.0 bar Process connection: Ø 8 x 27 mm Mounting position: vertical Connection position: bottom Material: Housing: metal, measuring system and connection: Cu alloy Other quantities on request ! New ! Dimensions ( pressure gauge ): 40 x 70 x 27 mm

Machine for the production of length graduations Feinmess Dresden TLZ1000/ 1 MZ visual line scale adjustment graduation: length = < 1050 mm table: pitch length =

x-travel: 5000 mm y-travel: 3600 mm z-travel: 710 mm w-axis: 1250 mm Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 45 kW tool taper: HSK work table:: table surface area: 2100 x 4000 mm max. workpiece weight: 43 t column daylight: 2750 mm distance table - lower edge spindle: 1880 mm Tool-Presetter:: number of toolpositions: 60 pos. tool taper: HSK feeds:: 8000 mm/min rapid traverse ( X / Y / Z ): 30/30/30 m/min rapid traverse: W: 3 m/min control: Mazatrol SmoothX ram head dimension: 450 x 450 mm b-axis: -100 / +100 ° c-axis: +/- 180 ° total power requirement: 105 kVA weight of the machine ca.: 65 t dimensions of the machine ca.: 7,6 x 12,6 x 6,65 m Double-column, 5-Axis simultaneous Machining Center equipped with: - CNC-Control Mazatrol SmoothX - simultaneous 5 Axis Control Function - Relocation Detectro - Chip Conveyor - Hi-Pressure C ...

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimen ...

90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung  ...

bore capacity in steel (diameter): 28,0 mm throat: 320 mm bore stroke: 150 mm morse taper: 3 MK table:: 500 x 350 mm turning speeds: 75 - 3010 U/min total power requirement: 1,35 / 1,7 kW weight: 290 kg range L-W-H: 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 1 ...

Tenon mills in perfection A video of the running machine can be sent on request. Program 1: Set-up operation Program 2: Manual milling Program 3: Straight or oblique pins up to 60 degrees with chamfering and starvation Program 4: Flattening, e.g. for corner and ridge blades Precise adjustment options and precise positioning by laser Special milling head with milling ring for plating, chamfering and tenon milling High-torque 6kW motor with automatic motor brake Feed control for hardwood use 3m stop profile with scale Tenon milling at right angles up to approx. 500 x 250mm Ideal machine for carpentry, timber construction, half-timbered houses, carports and pergolas Suction connection 2 x 100mm Protective curtain automatically opening and closing Hood lock Kill switch CE mark Includes instruction manual and comprehensive on-board tools Original paint, only dabbed  ...

faceplate diameter: 3.000 mm swing diameter: 4.000 mm turning height: 2.500 mm Control: Fanuc 0i-T max. workpiece weight: 30.000 kg table:: table diameter: 3.000 mm table speeds: 1 - 100 1/min power capacity - table: 60/75 kW C - Axis:: Working speed: 0 - 180 °/min max. table speed: 0,5 1/min turret slide:: Shank diameter: 50 mm spindle cone: ISO 7/24 No.50 Spindlespeed: 15 - 1.500 min/-1 power capacity - Tool Spindle: 22 / 26 kW ram cross section: 300 mm axis stroke:: x-axis: 2.335 mm z-axis: 1.600 mm cross rail adjustment: 2.000 mm Tool-Presetter:: tool taper: MAS BT 50 number of toolpositions: 24 (2x12) pos. max. tool weight: 90 kg draw bolt: DIN.69872 feeds:: rapid feed (X / Z): 8 m/min rapid traverse of the crossrail: 500 mm/min total power requirement: - kW weight of the machine ca.: 95 t dimensions of the machine ca.: 14,0 x 7,4 x 9,0 m Documents: Coolantsystem: 4-Jaw-Chu ...

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...

max. format 33 x 51 cm Year of construction 2003 mobile stacking delivery for mark-free laying Scale or single sheet mode selectable Press station pneumatic Delivery optionally left or right possible Stacking height 3 - 160 mm Price on request. We deliver and install worldwide!

Packaging machine for various areas in the GRANULES category: Food - snacks, peanuts, sweets, chips, dried fruits, cookies in general, etc. Automotive - small parts in general. Current setup for packages from 30g to 60g. Possibility of packing larger volumes with the acquisition of a hopper for setup. Productivity: 40 to 60 packs per minute. Description: Vertical packaging machine made of stainless steel and carbon steel parts with zinc plating. Front, side, bottom, upper protections and moving parts manufactured in compliance with NR-12. 10-head scale coupled to the machine, product supply conveyor, output conveyor, electrical panel in compliance with NR10. Configured with Schneider PLC and HMI Touch Screen with color screen where controls and functions, production and storage of data and recipes are managed. Equipment Voltage: 220v, Three Pha ...

sheet width: 1040 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm blade length: 1100 mm no. of strokes: ca. 38 Hub/min back stop - adjustable: ca. 500 mm Control: konv. table height: 820 mm Number of working hours: ca. 610 h engine output: 5,0 kW weight: 2250 kg range L-W-H: 1650 x 1900 x 1300 mm Machine from a maintenance workshop with only approx. 610 operating hours () Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 - ...

sheet width: 500 mm plate length: 1000 mm plate thickness: max. 6,0 mm pressure: 28,0 t throat: 500 mm height of stroke: 0 - 40 mm working area: X = 1200 mm working area: Y = 570 mm no. of strokes: max. 180 Hub/min punch diameter: max. 105 mm work height max.: 900 mm oil volume: 50 l total power requirement: 4,0 kW weight of the machine ca.: 2500 kg range L-W-H: 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y p ...

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Fastbind Casematic H32 PRO Covermaker / Casemaker incl. accessories (laminator, block press) The FASTBIND Casmatic H32Pro is a professional covermaker / casemaker with folding unit for the on-demand production of individual book covers for hardcover bindings and photo books up to 330 x 330 mm. • For the production of custom printed hardcover book covers. • All you have to do is print the desired motif on self-adhesive material or self-adhesive material on the back. • Of course, all known book cover materials can also be used if they are self-adhesive or self-adhesive or glued • With the help of the Hardcover Maker, the grey boards are inserted and covered with a precise fit. • T ...

CNC Plate Bending Roll Year 2021 Approx. 100 hours Number of Rolls 4 Rolls length 10’ 2” Top Roll diameter 18.2” – less deflecting thanks to Planetary Guide Technology Bottom Roll Diameter 16.6” Side Rolls diameter 14.2” Smallest possible diameter 21” thank to planetary guide technology Rolling Speed 20 ft/min (imperial) Installed power HP 72 (Energy Saving Technology) Power Supply V., 60 Hz Rolls material High resistance, heat treated, tested & certified Carbon Steel Rolls Hardening Induction surface up to 48 – 62 HR Rockwell C, according to Customer’s application and rolls materials Rolls Periph, Speed compensation Automatic (no torque loss, no operator setting needed) Rolls Crowning Top and lower (clamping) rolls are standard crowned to compensate Rolls deflection Rolls guiding Friction-free, mill-scale-proof, lubrication-less planetary guides R ...

Stock number: 3814 PROCESSING Manufacturer: MATSUURA, Type: LX-0 - HIGH PRECISION Machine NO.: 20110533, Year of manufacture: 2002 Specifications: Table size 540 x 320 mm mm Longitudinal movement (X) 330 mm Transverse movement (Y) 300 mm Vertical movement (Z) 250 mm Spindle cone BT 30 ISO Spindle speeds 0-40,000 rpm Spindle motor 2.2 - 3,7 Kw Total power 22 KVA Tool changer 50 places Feed rate 1-90,000 mm/min Rapid traverse 90 m/min Control LX0/ Fanuc L-Tech 15I Fabr. Accessories: High Presision Liniare Scale X/Y/Z - 0.0001 mm Cooling water system. Spindle Cooling Tool Measuring Length: 3110 mm, Height: 2550 mm, Width: 1500 mm, Weight: 5000 kg

Roll diameter: 640 mm; Stand projection: 620 mm; Cutting depth: 400mm; Swivel table: yes -0 to + 15Â; Table size: 870 x 620 mm; Belt speed: 1660m/min; Motor power: 2.2 kW / 400V; Engine braking: yes / automatic; Suction connection: 2 x 120mm; Machine length: 1190 mm; Machine width: 780 mm; Machine height: 2063 mm; Weight: 320 kg; Heavy-duty design with high dead weight for maximum smoothness Particularly smooth and precise running thanks to torsion-resistant machine housing Cast flywheels with rubber lining and cleaning brush 3-roller precision saw blade guide as standard at the top and bottom Large cast iron saw table, swivel from 0Â to +15Â with ground and polished surface Large cast iron rip fence with round rod guide, easily movable Saw band tension indicator Precise cutting height adjustment via rack and pinion with millimeter scale Self-braking motor Available on r ...

Daumar PA-25 rotary scale complete with infeed conveyor 2 x Unit 1 x 1996 & 1 x 2000 Please message for more details

Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS with 2 tracks (2 objects are weighed simultaneously) • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz Scale has worked together with aerosol filling/sealing unit (our item no. 13-0102).

Silverson MP45 Mayonnaise plant Serial: MP45107 2013 but fully overhauled by PPML in 2021, stainless, mayonnaise and sauce plant, Silverson sauce plant is designed for small to medium pilot scale production of sauce, the unit is designed to carry out the entire process, including rapid preparation of pre-mixes, hydration of thickening and stabilising agents and preparation of the final oil in water emulsion, HMI touch screen controls with programmable settings, Silverson high shear in line mixer model 450LS, 7.5Kw motor, with manuals / drawings, mobile, 3Ph

bore capacity in steel (diameter): 32,0 mm bore capacity in cast iron: 36,0 mm throat: 280 mm bore stroke: 150 mm turning speeds: 120 - 1600 U/min table-size: 400 x 550 mm morse taper: MK 3 feed: 0,1-0,2-0,3 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - continuous speed adjustment via VARIO drive” - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop with mm scale - Coolant device with container - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Balancing machine for balancing tool holders in 1 level. Accesories: 80.213.01 Software for balancing by drilling (axial) 80.245.10 Software for calculating alternative compensation positions (TDC 4.0) 80.207.10 Tool scale up to 30kg (for balancing machine) 80.230.00 Calibrator for calibrating the balancing machine TD 1002/2002/2009 80.201.E50.00 Adapter for HSK E50 with clamping system (May only be used in original Haimer Tool Dynamic!), max. tool length: 360 mm, Max. Workpiece diameter: 340 mm, max. tool weight: 15 kg, measurement accuracy: < 0.5mm, Measurement accuracy: < 1 gmm, compressed air: 6 bar, Power consumption: 0,4 kW, Power supply: 230 V / 50-60 Hz, Dimensions W x D x H =: 500 x 680 x 820 mm, mass: 200 kg, colour: black-and-white

Universal Automatic tablet testing system - Measuring equipment for laboratories - Tool for tablets Allows to test : Hardness Diameter Thickness Weight Accuracy Scale Sartorius WZ64S Range: 10 to 50 g Unit: mg / 0.5 mg / 0.1 mg adjustable Thickness Drive: stepper motor. Measuring principle: Linear potentiometer. Unit of Measure: mm or inch. Tolerance; +/- to.1 mm Hardness Drive: stepper motor. Measurement: Load measuring cell (lmz) Measuring principle: Torque gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of Measure: mm or inch. Range: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0,1 mm Voltage: 100 / 240 V, 50Hz / 60 Hz The UTS is a universal and fully automated test system developed for use in industry. This tool is the approved model of a series of test systems that have been tested for man ...

Pig slaughterhouse, approx. 200 pieces/hour. Location: 26215 Wiefelstede/ Germany The system is dismantled into individual parts. -consisting of the following components: -1): 1x rider seat retainer with automatic Cardiac/cerebral anesthesia, color. Banss, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x dry whipping machine make Banss, type T3S -7): 1x whip washing machine make Banss, type AW -8): 1x pre-washing machine, make Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x continuous hair removal machine, make Banss, type 300-2/1 -11): 1x lot of cable -12): 1x bleeding and brewing tunnel conveyor -13): 1x giblet conveyor -14): 1 slaughter conveyor -15): 1x PLC control, make Siemens, type S7-414-2DP -16): 1x weighing rail conveyor, make Bans ...

Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: 0-40 / 0-60 mm -Vernier: on both sides -Dimensions case: 175/155/H30 mm -Weight.: 0.5 kg

Vernier caliper, vernier caliper, vernier caliper -Caliper: vernier caliper with fine adjustment -Measurement scale: 0 - 1550 mm -Vernier: 0.05mm -Dimension: 1760/260/H20 mm -Weight: 5.7 kg

Vernier caliper, caliper, caliper -Caliper: Vernier caliper with fine adjustment -Measuring scale: 0 - 1050 mm -Nonius: 0.05 mm -Dimension: 1170/240 / H14 mm -Weight: 2.7 kg

Dial indicator, dial gauge, probe, probe, centering device, centrizer, 3D probe, probe -Measuring range: 0-3 mm -Reading: 0.01 mm -Scale: 0-50-0 -Tolerance marks: adjustable -dimensions: 95/55/H25 mm -Weight: 0.1 kg

Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Measuring range: 1mm -Reading: 0.001 mm -Scale: 0-100-0 -Tolerance marks: adjustable -Price: per piece -Number: 4 pieces -Dimensions: 135/65/30 mm -Weight: 0.2 kg

Clamping plate, welding table, welding table, straightening plate -Diameter: 1240 mm -Height: 975 mm -Plate thickness: 18 mm -Groove scale: 18 different diameters -Weight: 478 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate with: angle scale -Drawing: with dimensions in the photos -Dimensions: 315/245/H68 mm -Weight: 11.3 kg

: neu : ca. 6 Monate ab Auftragse : Taiwan : 66760 € : 1341.88 € : 600 mm : 600 x 300 mm : 610 mm : 600 x 300 mm : 420 kg : 700 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 350 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2000 1/min : 5,5 kW : 0.75 kW : 1.1 kW : 1.1 kW : 2710 mm : 2428 mm : 2200 mm : 3500 kg : 975 mm : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device _FULLY ENCLOSED SPLASH GUARD PROTECTION OF WORKING AREA_ grinding wheel grinding wheel flange grinding  ...

Width 66 cm Year of construction 2004 Pallet feeder PFH 66 Tremat Arc Cutting System Double Sau Grade 4 fold pockets in the parallel break section Automation Kit II Automatic folding pocket adjustment Automatic Folding Roller Adjustment downstream knife shaft 2 folding swords in the cross-breaking section 1 additional fold pocket after the 1st cross break Scale display SAK without compressor new folding rollers and bearings in parallel fraction Machine condition: cleaned and tested Price on request. We deliver and install worldwide!

Lid Maho DMC 64 V linear Year of construction 2003 The MMC was overhauled in October, as well as the rectifier. The spindle motor has been overhauled - The encoder is new as well as the glass scale in X. Location: Bochum

x-travel: 300 mm y-travel: 120 mm z-travel: 120 mm clamping range: 190 x 160 mm Required air-pressure: 6 bar distance spindle /table: 21,5 mm turning speeds: 12000 U/min total power requirement: 1,1 kW weight of the machine ca.: 95 kg dimensions of the machine ca.: 700x900x1600 mm Copy router BF 365 with automatic switching - Pneumatic clamping device - Automatic shifting - Centering device with scale - Milling area 300x120 mm - Stroke 120mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinally milling boring machine 66K25F4-03 The machine is designed for complex processing of parts made of ferrous and non-ferrous metals by milling, drilling and boring in single, small-scale and mass production Table - 2500x8000mm Machine dimensions - 8260x22100x8370 Weight - 127 tons CNC Machine accuracy class according to GOST 8-82 (N, P, V, A, C) - N The length of the working surface of the table, mm - 6000 Table width, mm - 2500 Spindle speed limits Min/Max, rpm. - 5 - 2000 Power, kW - 55

Stainless steel mixer in 6m container. EKATO mixer EM 2060., 1bar, 25°C, 80-122 rpm Control Schoregge GmbH Complete with controller, scale, etc. Dimensions of the mixer: Diameter: 1.60m Height: 0.80m Volume: 1600 l

WOHLENBERG pro-tec 137 with ASE – cutting line  Wohlenberg 137  Year / SN 2007  Airtable  Touchscreen  CIP3 + CIP4 compatible  ASE  Photocells  Program  Sidetable  Baumann NUP 1000 – Stacklifter  Max Sheetfed size: 135cm x 110cm  Baumann BSP 3 L – Vibrator  Papersize: 80cm x 114cm  Baumann BA 3 – 1400 – Unloader  Papersize: 80cm x 140cm  Mettler Toledo Scale

Maximum tool diameter 200 mm Distance between centers 460 mm Surface grinding 200 x 50 mm External grinding dimensions Ø 5 - 50 x 400 mm Internal grinding dimensions Ø 10 - 50 x 75 mm - Workpiece spindle head Rotation range -90° to +90° Speed ​​110 / 200 / 300 rpm MT 2 tool holder Jaw chuck diameter 100 mm - grinding head Rotation range -90° to +90° trip Across 200 mm Vertical 200 mm Vertical scale division 0.01 mm Vertical feed per handwheel revolution 1 mm/rev Graduation across fine / coarse 0.005 / 0.02 mm Side adjustment per turn of the knob 1 / 4 mm/rev Grinding wheel 200 x 20 x 75 mm Speed ​​2500 rpm Internal rotational speed of the grinding spindle 13,500 rpm - worktable Max. stroke 480 mm Hydraulic longitudinal feed 0.01 - 6 m/min Table rotation range -45° to +45° Total engine  ...

This advanced packaging machine is designed to efficiently and precisely fill plastic or glass jars with bulk products. Made in the USA, this machine automates the entire packaging process, including jar retrieval, product dosing, membrane sealing, and cap tightening. With a production capacity of approximately 1500-2000 jars per hour, it is ideal for high-volume production. Heres a detailed overview of its functions: 1. Jar Retrieval: The machine features an automated system for handling both plastic and glass jars. Jars are picked from the supply and positioned for the filling process. 2. Product Dosing: Equipped with a highly accurate dosing system, this machine ensures precise filling of the jars with bulk products such as spices, coffee, tea, grains, or sugar. The dosing system can be adjusted to meet specific product weight or volume requirements. 3. Membrane Sealing: A ...

Steril Food, SELECTA all stainless steel, fully automatic autoclave, 80 litre capacity. This autoclave is perfectly suited to small and medium-sized production runs and small spaces, thanks to its 80-litre capacity and very small footprint. It meets all the needs of the artisan canner and complies with all French and EEC professional standards. Applications : - Sterilisation of canned food products - Suitable for small production trials and small-scale producers Features : - Rapid water cooling - Highly efficient heat treatment - Preserves the organoleptic quality of food products - Heat treatment parameters are quick and easy to change - 10 configurable programmes - Models with integrated compressor + Automatic loading and unloading arm : Small loading and unloading crane for 80 and 150 litre models with adapter for handling stainless steel baskets. Axial rotation to p ...

Application: Tangential flow filtration (TFF) on an industrial scale. Produced by Cytiva (formerly Pall Lab) in 2014. Unit No./TFF Project Number 2 TFF system - Designed for the biotechnology and biopharmaceutical industries Max allowed pressure (PS) -1/6 bar Min/Max Allowed Temperature (TS) -10/45 C The machine after disassembly from the working production line. Data: Weight 1600 kg Length 2.30m x width 1.20m x height 2.20m Power supply 3-phase + 1-phase + compressed air

Twin-screw extruder complete with gravimetric dispensers, water refrigeration system and bigbag weighing and filling system Sale of production line consisting of: • A BANDERA model 55LD42 twin-screw extruder; • A dispenser called “KYARA” positioned upstream of the extruder, in the part closest to the motor. The Kyara consists of four granule hoppers that mix up to four different materials. The mix obtained is then managed by a single main dispenser (DOS 1) positioned naturally also upstream of the twin-screw line. The charge of the four KYARA hoppers is completely automatic and managed by a blower positioned on the ground. The latter is connected with four lances which must each be inserted into a different bag of material that has been chosen mix. The mixture proportions are set by an operator directly on the panel control dedicated to the dispenser; â ...

Caliper, Workshop caliper WHALE BRAND 0 - 300 mm cm - scale pitch: 0.10 mm beak length: 55 mm for indoor and outdoor measurement with beveled measuring tips and locking screw in wooden box New ! Dimensions ( caliper ): 410 x 100 x 10 mm Dimensions (wooden box): 440 x 130 x 24 mm

The ProCepT Granulator is used for wet or melt high shear granulation and pelletization. Depending on vessel size, the typical batch range varies from 15g to 1kg of product. The granulator is used to create wet agglomerates by high shear wet mixing of different powders. The atomized nozzle sprays the solvent with binder or active on the powder vortex, created by the impeller and chopper. The ProCepT Granulator is the ideal equipment for formulation R&D, demonstration or educational purposes and features: Combination of plexi and glass for excellent process transparency Stainless steel vessels available Integrated on a trolley, wall mounted or on a fixed table/floor stand Monitoring and control of all critical parameters Water and organic solvents Easy clean-ability and strip-down of components in minutes Different vessel sizes (for scale-up) Atomization nozzle with different orifices Qui ...

: neu : ca. 6 Monate ab Auftragse : 148100 € : 2947.19 € : 730 mm : 1200 x 600 mm : 1200 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,001 - 0,04 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m ...