We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,248 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.XD7 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The Professional Extreme table Article no. 4-280030.XD7 has 2400x1200x200 mm a diagonal arrangement of holes on the table top and a parallel one Hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table one Material thickness of approx. 24.5-27 mm. The table top is made of hardened Tool steel manufactured. The little stressed side walls are still off for reasons of cost Steel S355J2 + N made. Grid lines at a distance of 100 mm make it easier for you the structure of your device. The welding tables are provided with a scale as standard. Including 4x feet, basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1.800 U/min engine output: 1,4 / 2,2 kW column diameter: 145 mm thread: M24 ST60 thread: M30 GG20 feed: 0,1-0,2-0,3-0,4 mm/U weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinite ...
new
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.P 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: L 260 mm capacity 45 degrees: square: L 250 mm capacity 90 degrees: flat: L 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm capacity 45 degrees: round: R 200 mm capacity 45 degrees: square: R 180 mm capacity 45 degrees: flat: R 200 x 160 mm saw band length: 3650 x 27 x 0,9 mm cutting speed: 40 / 80 m/min total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,640 t dimensions of the machine ca.: 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New ve ...
new
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,55 t The Professional 750 table article no. 4-280040.P 3000x1500x200 mm has a Hole arrangement in a 100 mm grid on the table top and a parallel one Hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has one Material thickness of approx. 24.5-27 mm and is made from high quality steelS355J2 + N manufactured. Grid lines at a distance of 100 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 80 - 1.125 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm thread: M24 ST60 thread: M30 GG20 feed: 0,10 + 0,20 mm/U weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely va ...
used
Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 15300 € : 286.11 € : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.12 kW : 0.37 kW : 2.2 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping € 970,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 14 mm throat: 200 mm bore stroke: 60 mm morse taper: 1 MK table:: 280 x 260 mm turning speeds: 430 - 4500 U/min column diameter: 70 mm weight: 100 kg NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spin ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 27500 € : 508.75 € : 5000x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 640x360 mm : rund 360 mm, quadrat 360 : rund 310 mm, quadrat 270 : rund 360 mm, quadrat 360 : 800 mm : 0.12 kW : 3 kW : 3000 mm : 1200 mm : 1910 mm : 1635 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (sample photo - roller table see photo - optio ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 51200 € : 936.96 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 0.37 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional a ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 78800 € : 1442.04 € : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 600 mm : 1000x600 mm : rund 650 mm, quadrat 600 : rund 440 mm, quadrat 440 : rund 650 mm, quadrat 600 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 4750 mm : 1970 mm : 2630 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was create ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 44100 € : 815.85 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, ...
used
New raw coffee loader for loading green coffee in the hopper of your roaster Compatible with every coffee roaster between 5kg and 30kg batch size Loading speed of 12kg/min Including: - cart with built-in scale, - advanced filtered suction system, - roaster hopper feeder with rack Made of Stainless steel Monophasic electricity Dimensions of the bean cart (WxDxH): 90x62x64cm Dimensions of the motor with pump (WxDxH): 47x35x105cm Hopper feeder: Dimensions (WxDxH): 28x28x45cm Little discount possible if purchased along with a Coffee roaster Shipping worldwide possible Type "The roasters agency" in the search bar to see other listings
used
sheet width: 2000 mm plate thickness: 8,0 mm max. plate thickness: 8,0 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with ModulMW ...
used
sheet width: 2000 mm plate thickness: 8,00 mm max. plate thickness: 8,00 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with Modul ...
new
: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 605 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...
used
sheet width: 1050 mm plate thickness: 3,0 mm ST cutting angle: 2,0 ° stroke max.: 38 p. Min. total power requirement: 5,5 kW weight of the machine ca.: 1690 kg. range L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop () Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Engraving Machine PEAR PF/5N, Information about technical data are not binding., Machine available subject to prior sale., Working scale: 1:1,5 - 1:1,7, Dimensions number: 3, Models table dimensions: 650x450 mm, Working table size: 450x300 mm, Spindle speed: 380 - 16.000 rpm, Spindle motor power: 0.7 Kw, Weight: 1.000 Kg
new
: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...
new
pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...
used
Swing bending machine KRAMER type A toll. II 1000 Fabr. No. 48 287 Year of construction 1990 Usable length 1060 mm sheet thickness 3.75 mm Stroke of the upper cheek 180 mm Adjustability of the bending cheek 60 mm Backgauge 480 mm Drive power Bending cheek drive 4 kW Drive power Upper cheek drive 1.5 kW Mains connection 400 Volt, 50 Hz - manual and semi-automatic control - Angle adjustment via angle dial - one-piece pointed rail 135 - Backgauge with hand crank adjustment and simple dimension scale - continuous stop rail - electric foot switch, 3-fold space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 ton. good condition; used
used
Caliper CSE INOX (stainless steel) for shrinkage Shrinkage measure in model making or mold making Shrink caliper Measuring range in millimeters: 0-300mm Measuring leg length: 100 mm Internal measuring attachments: 10 mm Tip legs: 45 mm - Scale with 0% / 1.0% / 1.25% / 1.5% - Vernier reading - precise scaling- Locking screw - Tearing tips replaceable - INOX stainless good condition 4 pieces available, price indication per piece; used
used
Rotary table WMW type D 315 k Fabr, No: 28809 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio 90 : 1 - crank with perforated disc and scissors - Scale ring for reading on the crank- readable degree scaling on the rotary table- swing-out screw for direct pitch - clamping via clamping lever - 14 mm T- slots in the table top - cardan shaft drive - built-in dividing disc 17-25-30-39-47-57 Weight: 85 kg good condition; used
used
Hydr. Hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Masch. No. 115 106 1212 / 72783 Year of construction 1986 Saw area - round 250 mm Saw area - square 225 x 225 mm Saw area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole switchable Mains connection 380 Volt, 50 Hz - only for 90 cuts, no miter adjustment- Saw motor with 2 speeds and 3 V-belt steps - Hydraulic saw bracket feeding - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for saw bracket lower - manually via handwheel height-adjustable material support table with mm scale - manual material tension - Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1500 x 700 x 1550 mm Weight 590 kg very good condition; used
used
Golden roaster 15kg Automatic manufactured in 2019 with less than 10 tons roasted. Including green coffee lift with scale and destoner All parameters are electronically adjustable on the monitor: - burner power - drum rotation speed - air flow - cooling power - cooling arm rotation speed - green coffee lift airflow - destoner airflow Recipes can be saved and reproduced automatically with the HMI Compatibility with Artisan and Cropster softwares Low consumption premix burner compatible with natural gas and LPG Single phase 220V 50-60Hz electricity Good quality components (Italian motors and gearbox, Beijer HMI and variable frequency drive, Combhex burner, Schneider and Siemens electrical parts, etc.) Help for the installation and training possible with extra cost depending on the location Inspection possible in production
used
CNC Floor Type Boring & Milling Machine PAMA Speedram 1000 Manufactured new in 2008 - with only 4500 program run hours Heidenhain iTNC 530 CNC Control X 13000 mm Y 3000 mm Z 1000 mm W 700 mm Pama NC-Rotary travelling table Table size 2000 x 2200 mm Table load 16 t B-Axis 360°/0.001° with contour milling capability V-Axis table travel 2000 mm Boring spindle diameter 150 mm Spindle taper ISO 50 Spindle drive 37 KW Spindle speeds to 3500 rpm Floor plates Huron type universal head X,Y,Z hydrostatics Optical scales X,Y,Z,V Axes Linear magnetic scale W Axis Coolant through the spindle 30 bar with filtration unit Automatic attachment clamping on the ram PREPARED for ATC Excellent machine condition - Under power - Immediately available
new
1-head linear scale as desktop version. Suitable for weighing fine granulates such as sugar, salt, glutamate, as well as coarser ones such as seeds, tea, cereals, nuts, glutamate, rice etc. - Specifications: capacity: weighing hopper: 3 L, storage hopper: 50L weighing range: 20-2000g (accuracy: 0.2-2g) | HBM load cell | max. speed of the machine in neutral: max. 15 cycles/minute | power: 220V | product contact parts from AISI 304 | machine dimensions: L750xW550xH750mm | weight: 85kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
1-head linear scale as desktop version. Suitable for weighing fine granulates such as sugar, salt, glutamate, as well as coarser ones such as seeds, tea, cereals, nuts, glutamate, rice etc. - Specifications: capacity weighing hopper: 0.5 L | weighing range: 1-150g | HBM load cell | accuracy: 0.2-1g | max. speed of the machine in neutral: max. 15 cycles/minute | power: 220V | product contact parts from AISI 304 | machine dimensions: L600xW500xH750mm | weight: 80kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
Packaging system for dosing and filling granules into pre-made pouches and vacuuming of the pouch. Work steps: Removal of the bag, dosing of the granulate by means of a scale, forming the bag into a brick shape before filling, vacuuming and sealing of the bag. Suitable for granular materials such as coffee beans, cereals, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizer, etc. PLC controlled, operation via touch screen. Suitable for poly bags. - Specifications: filling range: 500-5000g | accuracy: = 5g | max. speed of the machine in neutral: 9 cycles/minute | power: 380V, total 5kW | compressed air: 0,85m?/min, 6-8bar | dimensions of the machine: L2260xW2925xH2500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stoc ...
new
PRO-Version High Performance vertical packaging machine for tetraeder AND pillow bags INCLUDING 0.5L/10-head-scale. Innovative rotation sealing system for triangle bag. OMRON PLC, interactive 9.7-LCD touch panel display, SCHNEIDER and OMRON electronic components, AIRTAC pneumatics and OMRON PID temperature control, servomotor film pulling, pneumatic sealing unit. - Specifications: vertical and horizontal sealing width: 10mm | cutting way: searate cutting | stainless steel (SS304) | 10-head-0.5-liter-multiscale | weighing range: 5-500g | accurracy: 0.1-2g | max. speed of the machine in neutral: (only weigher, not complete system): 60 cycles/minute | 9.7 touchscreen | 100 program setting | bag sizes: L(50-230)xW(60-160)mm | max. speed of the machine in neutral: 50 cycles/minute | 220V/3.5kW | 6bar, 0.3m?/min | machine dimensions: L1100xW1400xH2220mm | weight: 650kg. Please note that our ne ...
new
Automatic Polyamide Triangular Tea Bag Packaging Machine, including volumetric cup filler. Discontinuous feeding Controlled by step motor. Bag forming method: Triangular seals by two sets ultrasonic sealing units. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | dosing system weighing scale (standard device): 1-5g | accuracy = ?0.2g | packing material: polyamide, PET mesh, non-woven fabric, any material can be sealed by ultrasonic | tea bag dimensions: triangular bag: 50-80mm | flat pouch: W(60-80) x L(40-80)mm | film width: 120mm, 140mm, 160mm | power supply: 220V, 1.2kW | weight 600kg | machine dimension: L1200xW900xH1800mm (subject to the final design). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. ...
new
cutting diameter: 660 mm saw band length: 9000 x 54 mm cutting width: 1,6 mm Capacity 90° - round: 660 mm Capacity 90° - square: 650 x 650 mm Capacity 90° - rectangle: 650 x 1080 mm Capacity 45° - round: 660 mm Capacity 45° - square: 650 x 650 mm Capacity 45° - rectangle: 650 x 670 mm Capacity 30° - round: 410 mm Capacity 30° - square: 410 x 410 mm Capacity 30° - rectangle: 650 x 410 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 7100 kg dimensions of the machine ca.: 2500 x 2200 x 4500 kg The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydr ...
new
cutting diameter: 550 mm saw band length: 6850 x 41 mm cutting width: 1,3 mm Control: Halbautomatisch Cutting area - square: 550 x 550 mm Cutting area - flat: 550 x 700 mm total power requirement: 4 kW / 1580 Nm kW weight of the machine ca.: 3775 kg dimensions of the machine ca.: 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 650 mm saw band length: 7730 x 54 mm cutting width: 1,3 mm Control: halbautomatisch Cutting area - square: 650 x 650 Cutting area - flat: 650 x 750 total power requirement: 5,5 kW / 750 Nm weight of the machine ca.: 4550 kg dimensions of the machine ca.: 2100 x 1550 x 3900 mm The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Polar 115X guillotine Polar RAB4 jogger + Bizerba scale Polar LW-1000 lift
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 70300 € : 1406 € : 620 mm : 1.000 x 400 mm : 1.015 x 405 x 610 mm : 1015 mm : 400 x 1.000 mm : 1050 mm : 1100 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 420 mm : 0.001 : 3.7 kW : 1.5 kW : 1 kW : 1 kW : 6,3 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor ...
used
ZEISS MMZ G 30-40-30 COORDINATE MEASURING MACHINE Serial Number: 152024 Year: N/A Specifications: Measuring Range: X = 3,000mm Y = 4,000mm Z = 3,000mm Working Range (Maximum Workpiece Size): Width: 3,439 Height: 3,535 Scale Resolution: 0,2 Micron Length Measuring Error As Per ISO 10360-2: MPEE 4,2+L/300 µm () L = Length In mm MPE_P 2,9 µm MPE_THP 5,4 µm (In 78 Sec.) Temperature Requirements For Specified Accuracy: 18° . . . 22°C Temperature Fluctuations: 1,0 K/h; 1,0 K/d, 2K Ambient Requirements For Operation: From 15°C to 35°C Travel Speeds: Axis: 300mm/Sec. Vector: 520mm/Sec. Axis Acceleration: 250mm/Sec. Vector Acceleration: 430mm/Sec. Equipped With: Software License Gear Pro Involute License HP Workstation XW4600 48" x 48" x 2" Thick x 18" High Work Table ...
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 57670 € : 1153.4 € : 610 mm : 800 x 400 mm : 800 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 450 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 480 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1,1 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment accor ...
used
approx. 1.200 pieces Corletten, 1,30m, cook - used - : Prices per piece ex location (net): Price scale: up to 19 pieces: 99.-€ (net) From 20 pieces: 89.-€ From truck acceptance (approx. 70 pieces): 85.-€ Priority acceptance: complete trucks! Manufacturer: Koch Type: Muti – Box 130 Payload: 800kg Dimensions: 1.300mm x 1.150mm x 1.900mm Non-stackable, foldable with runners! Condition: good Available: as of now Location: 99189 Elxleben / Erfurt
used
Machine Details Stock number 1105-03812 Machine type CNC turning and milling center Brand GILDEMEISTER Type CTX beta 500 Year of construction 2014 Control type CNC Control 840 D SL SIEMENS Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from site Price Technical details Turning diameter 410 mm Turning length 850 mm Control 840 D SL SIEMENS Circumferential diameter over bed 500 mm Speed range - main spindle 25 - 5,000 min/-1 Drive power - main spindle 25 / 34 kW torque 280 Nm C-axis 0.01 ° Spindle nose 170 h5 chuck diameter 210 mm Chuck diameter 250 mm Spindle diameter in the front. Bearing 130 mm Spindle bore 87 mm bar diameter 77 mm Number of tool positions 16 pos. Number of driven tool stations 16 pos. Drive power applied WZ stations 11.3 kW Speed range - antr. Tool stations max. 4.000 min -1 Tool holder VD ...
new
: 40 mm roll diameter: 137 mm : 7 Upm engine output: 1,1 kW weight: 350 kg dimensions of the machine ca.: 1050 x 530 x 1250 mm Features: 2 rollers powered settings readout on scale easy reach emergency button supplied with standard roller set optional: various roller sets (available on request) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Motor power: 1.1kW/230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Band saw speed: 22 / 31 / 55 m/min; Band saw dimensions: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage version Separate emergency stop Impact switch low-voltage electronics 24 V Low-noise running Mobile machine base Ball-bearing saw blade guide Three speed levels for a wide range of material selection Microswitch for automatic limit shutdown Easy-to-read angle adjustment scale Standard with high-quality bi-metal band saw Saw blade tension adjustable on the front side via handwheel Adjustable material stop for serial work quick-release vise for fast workpiece clamping
new
Motor power: 1.1kW/400V; Cutting area: 100mm x 145mm; Coolant Device: Yes; Feed: infinitely variable; Saw blade speed: 45 /90 m/min; Band saw dimensions: 2480 x 27 x 0.9 mm; Cutting angle: 0Â to 60Â; Dimension: 1400mm x 685mm x 1235mm; Weight: 185kg; Low-noise running Stable cast iron design High cutting accuracy due to vibration-free running Lowering of the saw bar via hydraulic cylinder with throttle valve infinitely adjustable microswitch for automatic limit shutdown Coolant device Standard with high-quality bi-metal saw blade Adjustable material stop for serial work Robust machine substructure Ball-bearing saw blade guide Quick-release vice adjustable via handwheel. Clamping the workpiece with handy quick-release lever Easy-to-read angle adjustment scale Overload protection S 275N Motor Circuit Breaker Two Switchable Speeds
used
offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg
used
- Rotary table: 360° - Rotary axis Ø: 1250 mm - Encoder: Heidenhain ROD 456 400 Pulse/U - Machine weight: 1570 kg - Space requirements (W x D x H): 1.4 x 1.6 x 0.5 m - Total power: 0.5 kW - Condition: very good Details Connection for built-in encoder, connection for built-in reference switch/limit switch. Rotary table is driven by a three-phase motor, left/counterclockwise rotation, manual clamping, table was used exclusively for test purposes, table surface with T-slots 22-H12 DIN 650, degree scale/ruler around the table Accessories Documentation
new
sheet width: 2050 mm plate thickness: 2 mm strokes per minute until: 38 cutting angle: 1,75 ° table height over floor: 870 mm total power requirement: 3 kW weight of the machine ca.: 1520 kg range L-W-H: 2,2 x 0,6 x 1,2 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emerge ...