scale used for sale

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 Liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe connection NW50 with butterfly valve

Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe pulled forward NW 50 with butterfly valve

Storage tanks, steel tanks without pressure 4,000l Tannk No. 100, 101, 103 UNI-OFF Tanks no. 100, 101, 103 UNI-OFF Measurement and Weight: Total Height: 3000 mm Cyl. Height: 2000 mm Diameter inside: 1490 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65

Storage tanks outside marbled for wine, water, fruit juice, schnapps 12.200 liter UNI-NIED Measurement and Weight: Total Height: 3400 mm Length: 2400 mm Width: 1850 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With connection for zapf clape With connection for sample valve Lower bottom: With flat bottom With outlet pipe pulled forward NW50

Storage tanks 19.160 liter outside marbled for wine, water, fruit juice, schnapps UNI-NIED Measurement and Weight: Total Height: 4600 mm Cyl. Height: 3600 mm Diameter: 1650 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom With thread connection Cylinder tank: With 1 manhole With zapf clape With level indicator with bar and scale Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve With 6 feet Can be combined with 10.600 liter storage tanks (cat-no. EUBA18-0047).

Storage Tank in AISI 304 with flat bottom 3% floor slope up and 3% floor slope down - Volume: 26.200 Litre used – in very good condition · Material: AISI 304, Side Marbled, Inside 2B = IIIC · with Manhole oval on the front withdrawn 400 x 300 mm · with fermentation lock · with ladder hook · with sample valve · with level indicator with bar and scale · with outlet discharge with angle seat valve DN 50 with cap · with clear trigger with angle seat valve DN 50 with cap Measurements and Weight: Height: 4550 mm Diameter: 2750 mm Weight: 1350 kg

Pallet lifter, with scale clock Capacitive 2000 Kg as new

Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...

Scale with conveyor belt Brand Sartorius Built in 2006 Type: WM6FDP-1000Q Up to 6 kg Conveyor belt speed: 15-36 m/min Bandwidth: 300mm - Calculation and display of weight values (RS-232C) - 100 product storage - Fixed weight values in dynam. Operation - TCP | IP, RS-422 and RS-485 can be used via external cartridges

Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...

Storage tank, flat bottom tank 24.000 liter UNI-SAUL Measurement and Weight: Total Height: 4850 mm Cyl. Height: 4250 mm Diameter: 2600 mm Surface: outside IIID Material: V2A Upper body: - with conical bottom - with drawn downwards CIP cleaning line (connection DN 50, more see photos) - with 2 cran eyes Cylinder tank: - with forward pulled out manhole swiveling 440 x 340 mm - with holder - with clear outlet DN 50 with ball valve - with sample valve DN 15 - with level indicator with bar and scale Lower bottom: - with flat bottom - with forward pulled outlet with ball valve DN 50

Storage Tank / Flat Bottom Tank with Outlet Discharge 20.100 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 3700 mm Height: 4000 mm weight: approx.. 1,5 tons

Storage tanks, steel tanks without pressure 5,000l Tanks no. 42, 43, 44, 45, 46, 47, 48, 49, 51 UNI-OFF Measurement and Weight: Total Height: 3500 mm Cyl. Height: 2550 mm Diameter inside: 1480 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65 (angle seat valve)

Storage tanks, steel tanks without pressure 6,000l Tannk No. 56, 57, 58, 59 UNI-OFF Dimensions and weight: Ges. Height: 4120 mm Zyl. Height: 3100 mm Inner diameter: 1480 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)

Storage tanks, steel tanks without pressure 20,000l Tannk Nos. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 UNI-OFF Dimensions and weight: Ges. Height: 3830 mm Zyl. Height: 2800 mm Inner diameter: 2780 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with flange - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 5 feet - with residual outlet DN 65 (inclined seat valve)

Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.

Storage tanks, steel tanks without pressure 8,000l Tannk No. 28, 29, 30, 31 UNI-OFF Dimensions and weight: Ges. Height: 3300 mm Zyl. Height: 2230 mm Inner diameter: 2000 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)

According to the description, it can be Rt, Rz, Ra to be measured Voc3k -Touch distance 1.5; 5; 15mm - Measuring distance 1.25; 4; 12.5mm -Touch speed 1mm/s measuring range 0.3; 1; 3;m 10 at Ra 1; 3; 19; 30 microns at Rt, Rz -Display: pointer instrument, scale length 60mm, accuracy lass 1

Sell a winding number knife, which is Comes. Winding number measurement Measuring range 1-100 000 Wdg. divided into decades 101; 1110; 11100; 111000 Wdg. Multiplication factor x0.1; x1; x10 Measuring frequency switchable 50/60Hz Measurement uncertainty +/- 0.3%Wdg / 0.1Wdg in the case of windings covering the yoke on an equal scale for part u chamber windings up to +0.6% Display sensitivity for a rash of 1% of the year approx +/-0.1% +/-Wdg.

Storage tanks, steel tanks without pressure 10,000l Tanks no. 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 UNI-OFF Measurement and Weight: Total Height: 3900 mm Cyl. Height: 2900 mm Diameter inside: 1980 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

Storage tanks, steel tanks without pressure 15,000l Tanks no. 52, 53, 54 UNI-OFF Measurement and Weight: Total Height: 4120 mm Cyl. Height: 2950 mm Diameter inside: 2380 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)

Ref.-No. 00624 Designation of the system of double-track timing belt conveyor with needle prederer Manufacturer Hydroautomation Model custom made needle engraving device suitable for rectangular pipes Built-in Markator Engraving Device Built 06/2017 In a conveyor belt, the following components are to be labelled with a needle preder from the company Markator. Before labeling, the part length is checked using an analog scale. Nio tested components are not labeled and must be removed manually Tubes ⃣ 35x20x1,25mm 35x25x1.25mm Length of pipes 380 ... 410mm Clock Approx. 12 seconds / tube Labeling time about 8 seconds / pipe Transport height 900x1050mm Conveyor length Ca 2500mm (approx. 45 components) Double-track timing belt conveyor with length test and marking station Length testing Labelling station Pneumatic lifter Manual adjustment Needle-pregnating c ...

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

52,000 litres KZE tanks/storage tanks/ sterile tanks 4 pieces UNI-BAR B. No. 19-091 A-D GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap 1 slanted seat flange DN 350 for agitator - without agitator - Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo

52,000 litres KZE tank/ storage tank/ sterile tank UNI-BAR B. No. 19-094 GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo

Fermentolevain Fermento Exhibition Device! Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavours Control of the fermentation phase and the preservation phase easy-Touch control Mixing time and speed can be Stainless steel Stirring tool extendable with overflow - probe and alarm buzzer Exhaust height 535 mm Tank capacity 200/250 kg Cooling capacity per hr approx. 6°C falling Key 400V / 50Hz / 3.3kW, 16A-CEE plug Dimensions: 1040 x 1300 x 1810 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle More TOP bakery machines in stock!

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705

New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821189 Benefits: + TOP value for money + robust, mobile socket roll-out machine + Operation with lever sand sand sands and pedals possible + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore even suitable for marzipan and roll fondant + integrated electric motor + large digital display of the roller setting, instead of a mm scale on the lever + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Dough collection sheets made of stainless steel, on both sides of the table, pull-out + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 650 mm - Table length: 1,320 mm each = 2,640 mm - Roller adjustment: from 0.5 mm  ...

The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...

Storage Tank in V2A for wine, water, fruit juice, schnapps Capacity: approx. 1.200 liter Measurement: Total Height: 1730 mm Depth: 1150 mm Cyl. depth: 1000 mm Width: 730 mm Material: V2A Surface: Outside marbled, 2B=IIIC inside 2B=IIIC Upper body: With thread connection DN 50 Cylinder tank: With 1 manhole With level indicator with bar and scale Lower bottom: With outlet pipe pulled forward with butterfly valve DN 32 With 4 stable feet

Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale

Packaging line consisting of roller conveyor length 18 m, width 900 mm, electronic scale 150 kg, Cardboard gluing device and pneumatic lifting device

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...

Used screw feeder for powders / granules, by OMAS TECNOSISTEMI italy, model: DEP-MI. New: 2003. Dosing range: 5 - 1000 ml. Available dispensing spouts: 10, 12 and 14 mm. The device is integrated with a Mettler Toledo scale and an industrial vacuum cleaner for dedusting the dosing area.

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

Manufacurer: Roland Praktica Model: PR 01 - 480 x 660 mm Year: approx. 1994 Series: 167 No pressure counter available Film dampening system Scale feeder The large compressor (Dietz) is given with the machine. The electric motor was overhauled in 2017, new brakes etc. A package of matching printing plates is added when you purchase. Location: germany Price: on request

M. No .: 45553I // Output: max. / min mechanical: 9000 copies / h // 2000 copies / h Formats: trimmed max. / min .: 30.5x34.9 cm // 8.9x14 cm Untrimmed max. / min: 31.1 x 35.5 cm // 9.2x14.6 Product thickness max. 1.0 cm pressed Consists: Feeder: 3x double vertical feeder (DVA 100) total 6 Stations // Gripper opening for folded sheets with pre-and post-fold (min.0.5 cm) vacuum opening without overfold / combined gripper. Stitching station: 2xHohner Universal 52/8 Trimmer Scale display Pressure vacuum generator Equipment / Additional information: -Compl. Replacement knife set -middle cut -1x replacement stitching head -Replacement chains -Finger + tongues - Conveyor belts changed 4 years ago Power supply: 50/60 Hz // 3x380 V (420) // 3x220V (200)

Code: N0004 Brand: SICAR Model: SEGA 315 - Norme CE Professional panel saw SEGA 315 with carriage 3200 mm , blade 315 and scoring unit with separate motor - CE Standard Three-phase main motor 7,5 hp. Parallel guide on round bar with cast iron support and micrometric adjustment, blade lifting and tilting by handwheels, tilting blade unit with integrated scoring unit, aluminium carriage sliding on ball bearings, fence on extendable frame with two reversible stops. TECHNICAL DATA: Main worktable mm 910x550 Additional worktable mm 910x760 Additional lateral worktable mm 500x550 Main blade speed rpm 4000 Scoringunit speed rpm 8000 Blade diameter mm 300x30 Scoring diameter mm 120x20 Cutting height at 45° mm 75 Cutting height at 90° mm 100 Max cutting distance between blade and scale mm 1250 Carriage dimensions mm 3200 Three-phase motor power HP 5,5  ...

Conveyor technology, Knapp, approx. 1.484m, roll width approx. 42cm, ideal for boxes or cartons in 40 x 60cm - used - : Price ex location: only 99.500.-€ (net), dismantled, packed and loaded! Manufacturer: scarce Year of construction: 2017 Element width: approx. 51cm Roll width: approx. 43cm Mainly rollers, but there are also a few climbing bands etc. With various converters, curves, 1 scale, roller strips, Stowage Weight: max. 25kg For an extra charge, carton erectors, carton cappers, carton wrappers, inserts for advertising, etc. are also available for sale. On request, continuous shelves are also available for sale (for an extra charge)! Condition: good Available: from about March 2022 Location: Czech Republic Plan on request!

: neu : ca. 12 Wochen ab Auftrags : 1280 mm : 16 mm : 12 mm : 8 1/min : 3 ° : 7 pcs. : 500 mm : 22.5 kW : 250 l : 950 mm : 2100 mm : 1400 mm : 2000 mm : 5000 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marel / AEW Delford weigh price labeler Model: 8160 Serial: 82012 2008, Stainless weigh price labeler, min weight 1.5kg - max weight 20kg, scale interval 1/2g, Max tare weight -1Kg, overall length 2750mm, belt width 200mm, weigh platform 200mm x 240mm, with spares and manuals, 1Ph

: neu : ca. 12 Wochen ab Auftrags : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 pcs. : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 Short spindle: MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: 7 TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the disp ...

Used electric punching and binding system for plastic binding. For the fast and practical creation of brochures and documents in small to large runs. Binds up to 480 sheets Diameter adjustment guarantees easy opening and closing of the binding element, for perfect presentations Rotary knob to adjust the edge spacing Specially hardened punches for sustainable use Offset punching punches for a better punching result Highest format flexibility thanks to QSA technology, e.B. between DIN A4 and A5 Adjustable side stop for ideal punch adjustment Easy-to-empty waste drawer Built-in dimension scale for document or binding element size Robust construction and compact design

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

: 26 mm : 30 mm : 30 mm threading in St 60: M 20 threading in GG 20: M 24 : MK 3 : 120-2.200 U/min. throat: 293 mm : 514x360 mm : 2 x 14 x 224 mm : 90/675 mm column diameter: 115 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,0/1,6 kW Machine height: 1865 mm weight: 380 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely va ...

: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 470 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...