sc used for sale

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Extrudeuse CM EVOLUTION PLAST type CM-EVO 230 Année. : 2019 Puissance : 50 KW Tension : 400 VOLTS Poids : 4000 KG

It is basically a Zeiss SEM with a water-cooled column (LEO S420), tungsten cathode and has the following detectors/equipment: SE Detector RE Detector EDX detector Noran System 7 from Thermo Fisher And another for work at low pressure, even for poorly conductive samples. Vacuum-resistant live camera Chamber size Inner dimensions: D152 x W112 x H141cm³ Condition cathode Well, there are still several tungsten filaments available. Vacuum system: Pfeiffer DUO65 rotary vane pump, roots pump + large, magnetically mounted Pfeiffer turbopump

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

Stock number: F821, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Digital scale, Construction: Stainless weighing plate L 500 x W 400 mm., Weighing area: 0-15 / 15-30 / 30-60 kg., Interval: 5/10/20 g., Manufacturer: Sauter, Type: Multirange with printer

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Condition: good, demo machine: Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: F819, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Digital Laboratory scale, Construction: Weighing plate Ø 100 mm. , Weighing area: 0-200 g., Interval: 1 mg., Manufacturer: Mettler, Type: PC220

An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible.

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe NARDINI MS 125 E -Peak height above bed 150mm -Turning diameter over support 140mm -Tip width 500mm -Spindle speeds 50-2500 rpm -Spindle passage 34mm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK3 -Collet quick-clamping device with various collets 173E -Tool cabinet with machine-related accessories -Swarf back wall -Documentation Dimensions: LxWxH 1.6xx0.7x1.6 meters / Weight 1200Kg

Mobile Scissor Lift Rothe Benkmann Overall height 2.6m Total height extended: 3.4 m Load Capacity:2000kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Overview  This pilfer proof capping machine was manufactured in 2022 by the Spanish company CTM Ingeniería. It has been used for only 1.5 years under light operating conditions as part of an in-house production line. The company is now outsourcing its bottling operations, and therefore the machine is available for sale. It is in excellent condition and ready for immediate integration into a new production setup. Technical data  Capacity: approx. 1,200 bottles/hour (in a fully automated line) Cap type: Pilfer proof screw caps Head: Configured for 28 mm caps (interchangeable with other sizes) Bottle compatibility: Adjustable height, currently configured for small bottles Construction: Compact stainless-steel design Condition: Excellent, used for only 1.5 years Operation: Suitable for integration into automated bottling lines  

TECHNICAL SPECIFICATIONS Description: Cement silos / building material silos Number of silos: 3 pcs. Version: 2 x single chamber / 1 x double chamber silo Capacity: 3 x 100 tons. Number of screw conveyors: 4 pcs. SPECIFIC COMMENT - Also available individually - Incl. pneumatic compressed air filling - Incl. dedusting filter

Offer 26042 Operating hours 49500 h - Operating pressure 11 bar - Delivery rate 680 l/min. - Drive 400 V / 5.5 kW - Engine speed 2950 rpm - Air tank 200 L - Space requirement approx. W 600 x H 1600 x D 1000 mm - Weight approx. 250 kg

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0. Schnellspanner DIN 6348 - Gr 0. Für Fräsmaschine, Tisch-Säulenbohrmaschine. Bohrung: 5mm

Design: stainless steel, weighing cells from Philips, dimensions: approx. 1,300 x 1,250 x 720 mm, weight: approx. 50 kg.

An Atlas Copco screw compressor is being sold. Bj 2022 Operating hours and technical data in the picture Plant has always been serviced and is sold due to cessation of operations If required, the pipes for the air supply can be purchased additionally. Machine has to be dismantled by yourself. The system is handed over by us without electricity. Article location Nuremberg All information without guarantee Available from June 2026 Inspection and test run is possible Sale only to tradespeople Price 8000 Euro net plus VAT Loading facilities available

Dimensions search coil opening (WxH): 650 mm x 150 mm, Metal-free zone on both sides of the search coil: 75 mm, Inlet length to the metal-free zone: 1,200 mm, Conveyor dimensions (LxW): 2,200 mm x 600 mm, Transport height: 800 mm +/- 50 mm, height adjustable feet, Conveyor belt speed: 25 m/min (adjustable via frequency converter), Conveyor Type: Intralox 1100 Flush Grid - BLUE, Running direction: standing in front of the control panel: from right to left, Degree of protection: IP66, Ejection system: Stop if metal is found with an acoustic signal

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Strip light scanner consisting of: 1 pc. control unit Art.-No. VL-500 1 pc. 500-mm base Item no. VL-550 1 pc. measuring head Art.-No. VL-570 1 pc. Accessories including calibration plate, user manuals item no. VL-A2D 1 pc. Cover Art.-Nr. VL-C2 1 Pc. Win10 PC for VL-500 Series Item No. 972337 1 pc. LCD monitor for VL 23-inch Art.-Nr. Reference 972072L 1 pc. Comparative measurement module Art.-No. VL-H2P 1 pc. Shape and Position Tolerance Module Art. No. VL-H2G 4 pcs. AC cable Art.-Nr. OP-99031

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

Screw conveyors in different lengths and diameters. More than 20 pcs. available. Partly dismantled, partly still assembled.

Vibrating Screening Machine Manufacturer: Allgaier Type D 600 Masch.-Nr. 597 Screen diameter: 600 mm

Schlagkreuzmühle Manufacturer: Retsch Type SK 1 Without VA table The Retsch Type SK 1 impact cross mill is a highly developed laboratory device that is optimized for the efficient shredding of hard and brittle materials. This grinder is often used in laboratories in the chemical and pharmaceutical industries, in materials research and for the crushing of mineral substances. Key features of the Retsch SK 1: Grinding principle: The SK 1 works according to the principle of impact crushing. With rapidly rotating impact tools, the material is accelerated to a high speed and crushed by impact and friction. This enables effective and uniform shredding.

Scales / Dough Scales / Baker's Scales Kircher TWProduct descriptionManufacturer: KircherType: TWConction: used, baker's condition - please clean thoroughly before useMaterial: Stainless steel tubing, powder-coated in whiteMax: 6 kgMin: 250 gPictures may varyWe have several in stockDetails see pictures.

Baking Scoop / Oven Scoop NEW!  Baking scoop / oven shovel made of aluminium Dimensions 470x565 mm Edge height 30 mmDetails see picture

Ride-on - scrubber drier Kärcher Professional B 250 R + D100  time 2 years is in stock with us not worked with it therefore does not work  2 years ago has expired time that is in stock Product description: âœ" Manufacturer: Kärcher âœ" Model: B 250 R + D100 âœ" Condition: used, tested âœ" Operating hours: 927 hours âœ" incl. a roller brush of 100 cm working width âœ" is equipped with a 250 l water tank âœ" is ideal for cleaning larger surfaces Details see pictures

Dough Scale Running Weight Scale Model 601 NEWComber : KircherModel : 601Type : TWwith solid beech wood standing boardMax 6kg Min. 250gCalibratedDetails see picture

Dough Scale Running Weight Riser Model 700 NEWHomber : KircherModel : 700Type : TWComplette Tube construction made of stainless steel in material 1.4301.Main, secondary scale and connecting partsalso made of stainless steel in material 1.4301.Max 6kg Min. 250gCalibratedDetails see picture

Ice Cream Scoop Inox No. 1/55 NEW Stainless steel with plastic handlesManufacturer : InoxLiter 1/55 à ̃ mm 41 Details see picture

Ice cream scoop Inox  No. 1/60 NEWabove mentioned price for 2 piecesstainless steel with plastic handlesManufacturer : InoxLiter 1/60 à ̃ mm 40 Details see picture

Ice cream scoop Inox  No. 1/65 NEWabove mentioned price for 2 piecesstainless steel with plastic handlesManufacturer : InoxLiter 1/65 à ̃ mm 38 Details see picture

Ice cream scoop Inox No. 1/30 NEW above mentioned price for 2 piecesStainless steel with plastic handlesManufacturer : Inox liter 1/30 à ̃ 49 mm Details see picture

Ice cream scoop Inox No. 1/16 NEW Stainless steel with plastic handlesManufacturer : InoxLiter 1/16 à ̃ mm 58 Details see picture

Ice Cream Scoop Inox No. 1/20 NEW Stainless Steel with Plastic HandlesManufacturer : InoxLiterâ 1/20 à ̃ mm 56 Details see picture

Ice cream scoop Inox No. 1/24 NEW stainless steel with plastic handlesManufacturer : InoxLiter 1/24 à ̃ mm 51 Details see picture

Handlebar scooter for transport scooter( 4 pieces )suitable for Euroscooter for boxes 60 x 40 cmForks: galvanizedRubber wheels with back holeincl. Connecting screw and nutDetails see picture

Sack bucket aluminium ALU Weighing scoop Flour scoop 385 mm ( 2 pieces )Aluminium die-cast polishedTotal length approx. 385 mmWeight approx. 344 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weighing Bucket Flour Scoop Flour Sugar 210mm Aluminium die-cast polishedTotal length approx. 210 mm130mlWeight approx. 60 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Sack bucket aluminium ALU Weigh-in bucket Flour scoop 315 mmPolished die-cast aluminiumTotal length approx. 315 mmWeight approx. 240 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Sack bucket Aluminium ALU Weighing scoop Flour scoop 255 mm  ( 2 pieces )Polished die-cast aluminiumTotal length approx. 255 mmWeight approx. 136 gATTENTION: Aluminium is not dishwasher safe! Details see picture