sc used for sale

Stock number: F1016, Digital pallet weight, stainless steel,, Scanvægt Vægtindikator serie 8600., Mettler Toledo wall display,, weighing rate 2,5-150 kg., Readability 0,05 kg,, tara function., Printer Star type DP8340., Material: Stainless steel AISI 304, Weighing area: 2,5-150 kg., Interval: 0,05 g.

Stock number: F1015, Digital pallet weight, stainless steel,, Scanvægt Vægtindikator serie 8600., Mettler Toledo wall display,, weighing area 2,5-150 kg., Interval 0,05 kg,, tara function., Material: Stainless steel AISI 304, Weighing area: 2,5-150 kg., Interval: 0,05 kg.

Stock number: F1014, Digital floor scale, pin type,, galvanized,, SysTec type IT3000A., Display for mounting on the wall,, weighing area 2-300 kg., Interval 0,05 kg., Tara function,, weighing plate - pin L 1330 x W 830 mm., Material: Galvanized, Weighing area: 2-300 kg., Interval: 0,05 kg.

Stock number: D560, Digital scale, Sartorius 3808 MP,, Weighing 0 - 30 kg., Interval 0,1 g., Stainless weighing board 300 x 400 mm., Weighing area: 0-30 kg., Interval: 0,1 g.

Stock number: D1021, Digital scale, stainless steel,, Mettler Toledo, ID1., Weighing area 1-300 kg., Interval 20 g., With Tara function., Stainless weighing plate, 600 x 800 mm., Material: Stainless steel AISI 304, Weighing area: 1-300 kg., Interval: 20 g.

Stock number: D1018, Digital scale, stainless steel,, Mettler Toledo, ID5 with GD 46 printer., Range 1-300 kg., Interval 2 g., With Tara function., Stainless weighing plate, 600 x 800 mm., Material: Stainless steel AISI 304, Weighing area: 1-300 kg., Interval: 2 g.

Stock number: R995, Agitator, stainless steel,, Scaba type 40 SVGT., for side mounting on tank (T3163), 4 kW gear motor., 176 rpm., 220/380V., D 700 mm. 3-leaf propeller., Material: Stainless steel AISI 304, Propeller size: D 700 mm.

Stock number: R369, Agitator, stainless steel,, Scaba, Laterne with bearing housing and flushed seal,, excl. engine and propeller., D 40 X L 1650 mm. shaft., Material: Stainless steel AISI 304, Propeller size: Excl. propeller

Stock number: R264, Agitator, stainless steel,, Scaba., 0,37 kW motor, 935 rpm, 380 V., D 120 mm propeller., Material: Stainless steel AISI 304, Propeller size: D 120 mm.

Stock number: R1102, Agitator, stainless steel,, SCABA type SD 30/40T-M2., 2,2 kW motor,, 935 rpm.,, 220/380 volt., D 180 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 180 mm.

Stock number: R1066, Agitator, stainless steel,, Scaba type D20K., 0,18 kW motor,, 700 rpm., 220/380 volt,, with bracket for top mounting., Two 3-bladed propeller,, D 150 and D 100 mm., Material: Stainless steel AISI 304, Propeller size: D 150 mm. and D 100 mm.

Stock number: R1017, Agitator, stainless steel,, Scaba type 30 VP-THa., Lantern with gear and motor,, 0,25 kW, 230/400 V., 95 rpm., Shaft Ø 30 x L 1950 mm., Exclusive propeller., Material: Stainless steel AISI 304, Propeller size: Excl propeller

Stock number: R1015, Agitator, stainless steel,, Scaba type 40 VA-TL., Lantern, prepared for gear and motor,, shaft Ø 40 x L 3085 mm., 2 pcs. 3-bladed propeller D 500 mm., Material: Stainless steel AISI 304, Propeller size: D 500 mm.

Stock number: D913, Column lift, stainless steel,, Scanio type K7, for floor mounting., Fork-lift with bin fork for, lifting and tipping of Vemag bins., Max. tipping height 1900 mm., Material: Stainless steel AISI 304

Stock number: D724, Polarimeter, type Schmidt C.Haensch,, Small Universal Polarimeter., 220 V., Excl. halogen bulb.

Stock number: D1115, Loader, stainless steel,, GEA/Scanio type K16., For lift and unloading of max 1.000 kg. vats,, height of unloading 2500 mm., Outer dimensions D 1800 x W 2500 x H 3950 mm., Without safety cabinet., Material: Stainless steel AISI 304

Stock number: PM2076, Eccentric screw pump, stainless acid proof steel,, Seepex type BT 2-12., 1,5 kW. gear motor,, 220/380 V., 186 rpm., Screw feeding,, inlet flange L 350 x W 180 mm., Theoretical capacity 1.000 l/h., Material: Stainless acid proof steel AISI 316

170 litre, Stock number: T3122, Litre: 170, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filter tank, Standing: In frame, tiltable, Double jacket: Yes, Agitator: Yes, Inner diameter: Ø 600 mm., Manufacturer: Schenk, Model/type: ESF600/170RZ, Year: 1993, Other: Filter

vibrating screen, used, reconditioned, vibrating surface 1.400 x 480 mm., height from floor 900 mm., 2 ways out: 1st screen 8 mm Ø to separate clogs, 2nd for good material

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked

MARIS TWIN SCREW EXTRUDER, Barrel with 2 x 92 mm screws 40 L/D, n.2 vacuum degassing pumps, co-rotating parallel screws for polyolefines, complete with 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, electric cabinet, The machine is offered as is or reconditioned

MARIS TWIN SCREW EXTRUDER, Type TM 85 LC 37 L/D, dosing unit for granulated materials, barrel with 2 x 85 mm co-rotating screws 37 L/D, max screw rpm : 152, vacuum degassing pump 4,5 kw drive, Present capacity 450 kg/h depending on materials and feeding rate, 64 kw drive, Constructed in 1992, offered AS IS or reconditioned, installed power - used power in work: about 60-65% : 64, screws diam.: 85 mm. 37 L/D, screws: co-rotating

SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), when asking for a quotation, please detail:, - Type of extruder, - screw (s) diameter, - production rate in kg/h, - material tyupe, - material MFI, - contamination and average %, - filtration required in mesh or my, type: Semi-automatic, non-stop

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

Vibrating screen with 3 levels motor 4 kW Very good condition, Immediately available!

Schneidmaschine mit Rüttler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife

Antike Schneidmaschine - antique Guillotine Krause SM Baujahr ca. 1890-1900 - Serial-No. 198240 Very Beautiful antique Guillotine Sehr schönes antike Schneidmaschine

Schuppenauslage mit integrietrter Presswalzen / Stream Delivery with integrated Pressing MBO ASP 66-2 ME

Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z6 Year 1993 - Serial-No. 43930306-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 25.000 cycles/h

Neuer Schrägrollentisch / Band new inclined roller table Heidelberger - Stahl SRT 66

Schuppenauslage mit Presswalzen / Stream Delivery with integrated Pressing Horizon PST-40 Baujahr / Year 2006 - Serial-No. 028008 Format / Size min. 60 x 64mm - max. 440 x 310mm Höhe / High 280 - 1000mm mit Markiereinrichtung / with marking device Leistung / Geschwindigkeit 50-230m/min

Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66-2 MESerial-No. 06060608Year 2006

Schuppenauslage mit Presswalzen / Stream Delivery integrated Pressing Heidelberg SKP.D ME Baujahr / Year 1996 - Serial-No. 79018/96-242508 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter Equipment for two-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Auf Anfrage / On request: Netzadapter für den Eigenbetrieb / Power Adapter for SelfControl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Visit our online Spare Parts Shop: www.shop.f1-trade.com

Antike Schneidmaschine - antique Guillotine CHN. Mansfeld SM Serial-No. 37544 Very Beautiful antique Guillotine. Sehr schönes antike Schneidmaschine.

Schneidmaschine mit Stapelheber / Gullotine with Stack Lift Polar 92E Baujahr / Year 2000 - Serial-No. 7011474 Schnittbreite / Cutting width max. 920mm Gesamtschnittzähler / Total Counter 530.000 Cuts only Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Stapelheber / Stack Lift Polar S-FA-R-3 Sehr guter Zustand - Schneidmaschine aus einer Schule / Very good condition machine is from School.

Schneidmaschine / Gullotine Wohlenberg 92 MCS-2 TV Baujahr / Year 1989 - Serial-No. 3277-029 Schnittbreite / Cutting width max. 920mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include

Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition

Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW Abmessungen / Dimensions 200 x 80 x 150 cm Gewicht / Weight 730 kg

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...

Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.

42x Bracket scaffolding, galvanised Manufacturer: Baumann Length: Weight: 22kg € 29,00 per piece

Manufacturer: Buhler Model: SORTEX E PolyVision Year of Manufacture: 2018 Type of Machine: Optical sorting line Sorting Capabilities: - Capable of separating materials by color, including black and polymers. - Detects and partially ejects aluminum based on color recognition. Included Components: - Operator platform - Water chiller (~3.5 kW) for cooling - Flake feeding system with fan-assisted delivery - Suction system for good flakes with transfer to a packing cyclone - Cyclone/bunker unit with big bag frame and pneumatic cylinders - Separate suction and cyclone system for rejected (bad) flakes Performance: - Proven throughput of 1 to 1.3 tons per hour with sufficiently clean flake input Additional Applications: - Suitable for sorting berries and other small-sized items Technical Specifications Dimensions (Service Access - Including Vibrator): - Width: 2651 mm (104.8 in) -  ...

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

Ball screw with servo motor SIEMENSLinear guide with permanent servo motor SIEMENSTyp: 1FK6044-7AH71-1EG0Ident No. YF RN22 5076 01 001Year of construction: 2003Axle movement: 540 mmTotal length: 900 mmShaft diameter: 40 mmThread pitch: 40 mmBall diameter: approx. 6 mm- Compact unit with servo motor and spindle nut- Ball screw guided in a torsion-proof manner, drive via nut- Ball screw 40 mm (hollow shaft, inner diameter = approx. 22mm)- Permanent servo motor SIEMENS type: 1FK6044-7AH71-1EG0 (Serial No.: Ident No. YF RN22 5076