sc used for sale

Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg

running direction: right - left for 28 mm VacuVent closure with safety housing

MARK RMB 18 IVRD screw compressor was built in 2020 in Italy. The machine, consisting of reliable components, a robust housing and an easy-to-use control panel, delivers the highest quality compressed air, free of water vapour that is harmful to tools and machinery. Thanks to innovative solutions such as an efficient drive system and a perfectly optimised asymmetrical screw module, the MARK RMB 18 IVR oil-injected screw compressor saves up to 35% in energy consumption while maintaining the highest possible energy efficiency. The offer also includes a capacious tank and an integrated air dryer. The MARK screw compressor weighs 375 kg. Technical data of the MARK RMB 18 IVRD compressor - motor power: 18.5 kW - working pressure: 7 bar - maximum air pressure: 13 bar - minimum air pressure: 5.5 bar - maximum capacity (7 bar pressure): 210 m3/h - minimum capacity (7 bar pressure): 47 m ...

Modular Touch Screen Scale PC Scale METTLER TOLEDO Model: FW-T 6D B Proven quality from Mettler-Toledo! Year of Make: 2021 Calibrated until 31.12.2025 Colour: black 12.1-inch (30.7 cm) touchscreen 15.6" (39.6 cm) display 2-inch receipt printer (54 mm) Printer: Linerless Printer Interfaces: Gigabit Ethernet 10/100/1000; 1 x RJ11; 2 x USB; 2 x USB 3.0 Intel® Dual Core Up to 8 GB RAM; Up to 128 GB Flash DDR3 RAM; Solid State Disk (SSD) Microsoft Windows® 10 IoT 64-bit Shock-resistant die-cast aluminum housing with non-stick coating incl. 12" customer display incl. TK POS POS POS software Multigrade weigher: 3/6kg Graduation(s): 1/2g Minimum load (min): 10/20g The current model from Mettler Toledo prepared for TSE. incl. Windows and cash register option, which you need for TSE Fast Linerless / Receipt Printer up to 30  ...

We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

No.: 469543 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 15 mm SQUARE HOLE 6 mm THICKNESS (NEW and USED) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW and USED) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) 130 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR T45/ T50: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW and USED) FOR SM 518 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (NEW) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (USED) 25 mm SQUARE HOLE 6 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 m ...

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

- Year of construction: 1996 - Semi-automatic - Zalkin head with 4 wheels: 2x thread rolls - 2x safety ring - For closures Ø 28 mm

; Gross weight [kg]: 2160; Inspection Date: 2025-10-13; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230

We offer replacement and wear parts for all common scrap baling presses of German manufacturers, such as Lindemann, Becker & Prünte, Becker, Oberländer, Leimbach.

Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004

Veneer Guillotine Brand: Josting Model: EFS 2800 Cutting length: 2800 mm Two-handed control Parallel stop with handwheel adjustment

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

Gram Xtrem Condor S Platform Scale 3000 kg Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries as well as all other industries where scales come into contact with water, moisture or other corrosive substances. Maximum flexibility: Weighing pallets, drums, loaded transport or hand pallet trucks, carts or roll containers. Suitable for weighing standard-sized truck pallets (1200×1000 mm), large drums, trolleys or containers on wheels. Adjustable feet provide stability when weighing and optimal power transfer to the load sensors. Suitable for floor installation. Otional: ramps for loading and unloading weighing goods without special equipment Very low platform height (50 mm) for easy access to the load. Connection to Xtrem PC software for simultaneous recording of the weighing values of several scales. Minimizing technica ...

Electron microscope Brand: Jeol Microprobe Type JXA-8900RC Built in 1996 (S/N XM120052-170) All documents and measurement protocols are available. Many accessories Not checked for functionality Sold only to commercial enterprises! All information without guarantee

New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand

Excenter screw pump Make: Netzsch Type: NE 20A Speed-controlled gearbox (manufacturer: Stöber) Speed: 64-320 rpm Power: 0.55 kW at 1380 rpm Dimensions LWH: 1200 x 300 x 350 mm Weight: approx. 80 kg

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

On-seat scrubbing machine, Ground sweeper Brand: Tennant Type: 7300 Hours of operation read: 1951 h Electric motor Battery: 36V Charger Operating instructions Ready to drive.

Complete precision ball screw drive with bearings, stroke 308mm, 25x5/25, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Complete precision ball screw with pillow block and floating bearing, thread diameter 25mm x 5mm ball screw Plummer block Rexroth: R159161720 Plummer block Rexroth: R159111720 Ball screw nut with part holder: R150321085 Total 496 x 110 x 72mm Maximum stroke: 308mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we wi ...

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

Transport chain for scraper belt conveyors 450 K-3, 8,80m lang, Knoll, new -70% We have set a very low price! If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - For scraper belt conveyor Fa. Knoll 450 K-3 - The chain has 140 links and is therefore approx. 8.8m long - Chain link length 63mm, - Roll diameter 40 mm, - Clear width between the chains approx. 345mm - appr. 350 kg

Plate Scanner Machine No.: 34373 Size: max. 102cm Plate Scanner/Plate Reader for Heidelberg Speedmaster SM 102/SM 74, SM 52, Plate Image reader, for measuring the printing part of the surface of offset plates and stores the measured values on the job memory card or in the CPC data memory, for on-line transfer of the values to the press's control unit (for calculation of ink fountain zone openings and ink stripe widths in CPC 1 control unit), for all types of printing plates up to SM 102 format plates

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Multihead weigher make Selo as good as new with platform and ladder made of stainless steel. For general cargo or coarsely free-flowing products, output up to 100 weighings per minute depending on weight Search terms: coffee, production, industry, food, pods, nuts, pet food, pasta, instant, granules, wine gums, rice, confectionery, chocolate, cheese, bars, pasta, cereals, cosmetics, pharmaceuticals, powder, bulk goods, general cargo, capsules, tea, drugstore Search terms: coffee, production, industrie, food, pads, nuts,pet food, pasta, instant, granulate, wine gum, rice, confectionery, chocolate, cheese, bars, pasta, cereals, cosmetics, pharmaceuticals, powder, bulk goods, general cargo, capsules, tea, drugstore

Battery-powered high-performance sweeper/scrubber dryer Scrub and sweep in one go: with the M17 battery-powered ride-on scouring vacuum cleaner from Tennant® Scrubbing and sweeping in one pass – and chemical-free: thanks to ec-H2O™ technology in the battery-powered Tennant® M17 ride-on scouring vacuum cleaner with scrubbing and sweeping function. Highly efficient floor cleaning is ensured by double side sweeping brushes and automated high emptying, among other things. Chemical-free ec-H2O™ technology for environmental, health and cost awareness High indoor air quality thanks to 2-stage filter system with ShakeMax filter shaker Easy maintenance with tool-free access to suction feet, brushes and filters Double side sweeping brushes for longer cleaning path and protection of the suction cup Intuitive operation via touch-n-go™ controls Automated high emptying for debris  ...

Mettler-Toledo platform floor scale with ramp, platform dimensions approx. 1230 x 1480 mm (WxD), weighing range up to 600 Kg, d=100 g, overall dimensions including ramp approx. 1700 x 2300 x 130 mm (LxWxH) Includes ICS439a Compact Terminal

Installation 2020 Plant shut down after 6 months and short test runs Original price 166.000,00 € Dosing and screening station Products - Product Name: Spices - Bulk density: approx. 0.4 - 0.7 kg/itr (AZO assumption) System characteristics Electrical characteristics Operating voltage: 230/400 V; 50 Hz. Control voltage: 24 VDC Degree of protection: IP 54 Compressed air characteristics Operating pressure: min. 5 bar /max. 6 bar Connections > 1/2" Compressed air quality class according to ISO 8573-1 Solid impurities: quality class 1 Humidity - at ambient temperature > 3°C: quality class 2/3 - at ambient temperature 10 mJ - KST value < 200 bar m/s - ignition temperature > 300 °C - Smoldering temperature > 275 °C - Contact Resistivity > 10° Ohmm

ID3522 Semi-mobile screening plant for dry classification consisting of: 17 m³ feed hopper with bar sizer, mobile and pivoting AA 30 m conveyor belt, double-deck screening machine (screening area 2 x 16 m²), various conveyor belts (discharge belts, ascending belt, sand conveyor, oversize belt, product belt), control cabinet (built in 2021) Semi-mobile screening plant for dry classification consisting of: 17 cbm feed hopper with bar sizer, riser belt movable and swivelling AA 30 m, double-deck screening machine (screening area 2x16 sqm), various conveyor belts (discharge belts, riser belt, sand belt, oversize belt, product belt), control cabinet (year of construction 2021)

Böllhoff Uniquick Vario automatic screw feeder UNIQUICK Feeder Type 360 Plastic sorting pot ∅ 360 mm Quiet and surface-friendly conveying Optimal spiral dimensioning depending on the material to be conveyed (width and height) Integrated and controlled chicane High wear resistance Uniform flow rate due to amplitude control In a soundproofed housing on a frame Web width: 20 mm Head Ø of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Tape Bunker Bunker trough, chute: stainless steel Strap: white with FDA approval Filling volume: 10 litres Max. filling weight : 35 kg Drive: AC gear motor 230V/50Hz Bunker with innovative drive to ensure metered, quiet and part-friendly feeding of screws and connecting elements. UNIQUICK Multi Modularly expandable 3-fold crossover Distributes the tested screws to three st ...

Scrap scissors hydraulic with petrol engine

New screw and barrel for Battenfeld .../1900 injection unit 55 mm diameter complete with heaters and screws in the factory box.

Little used screw for Battenfeld .../1900 injection unit 65 mm diameter