sc used for sale

A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement.

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

TECHNICAL SPECIFICATIONS: Manufacturer: KARCHER Schiffswerft GmbH Description: Hydraulic folding barge Year of Make: 1966 Load capacity: 200 tons. (approx. 120 cbm) Drive manufacturer: SCHOTTEL-Navigator Drive type: 2 x 5-cylinder diesel engine Total drive power: 100 hp / 74 kW Number of propellers: 2 pcs. Number of anchors: 2 pcs. Number of watertight compartments of the ship: 8 pcs. Overall length: 38.26 m Overall width: 6.62 m Draft approx.: 2.79 m SPECIFIC COMMENT - Fully functional gravel barge - Hull dry - Available now

Dimensions (L/W/H): 2.645 x 900 x 2.130 mm Filter capacity: 14,5 m² Number of filters: St. Number of dust containers: 3 St. Weight: ca. 500 kg Dimensions (L/W/H): mm : 200 mm : mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4040 mm, 1 mm

used Schechtl swivel bending machine, with roller shears on the upper beam, Two foot switches, attachment rail 10 and 20m m Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 4040 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge Colour: grey/blue Total power requirement: 16 A Dimensions: 4965 x 720 x 1220 mm Machine weight: 3950 kg Upper beam stroke: 140 mm with roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment yes Machine number: MA7675

Key data: 3040 mm, 1 mm

used Schechtl manual bending machine, with foot lever Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 3040 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 1.75 mm without backgauge Colour: green Dimensions: 3800 x 800 x 1400 mm Machine weight: 1700 kg Upper beam stroke: 140 mm without roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment: 25 mm Machine number: 20592

DIAMETER 76 MM H 140 MM HOLE 30MM PERFECT

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR350 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: light blue (rusted) Truss type: TRN1-270-10-l INP profile: 100 x 50 mm Agraffe:5 HK (hook) Clear width: 2,700 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR350 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: light blue (rusted) Truss type: TRN1-270-10-l INP profile: 100 x 50 mm Agraffe:5 HK (hook) Clear width: 2,690 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR350 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss type: TRN1-270-08-l INP profile: 80 x 42 mm Agraffe: 5 HK (hooks) Clear width: 2,700 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

GENERAL CHARACTERISTICS: Stand-alone technological tooling dedicated to a specific operation in an automated production line. It is characterized by a massive, open central frame and unified, heavy clamping units. The device works directly with industrial robots in the thermal hazard zone, having advanced installation protection and a dedicated mass current dissipation system. LIST OF COMPONENTS: 1. DESTACO main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle scale (range 5-135°) facilitating collision-free loading. 2. Eye bolts (transport eyelets) – 4 pieces. 3. Copper ground blocks (welding ground) – approx. 2 terminal points. Thick copper connections to protect electronics and positioner bearings from welding current. 4. Electro-pneumatic box (I/O junction box) – 1 piece. A collection enclosure for signals fr ...

Advanced technological tooling with a dense and symmetrical structure of executive components. Designed for precise positioning and rigid locking of geometrically complex components (e.g. car body sheets) during automated welding or welding processes. The design is characterized by a high degree of repeatability of base points and is fully adapted to be mounted on a welding turntable. LIST OF COMPONENTS: 1. DESTACO pneumatic (knee) clamps – 30 pieces. Heavy actuators responsible for mechanical locking of the workpiece. 2. FESTO compact pneumatic actuators – 14 pieces. They are used to eject positioning pins or auxiliary locks. 3. Pressure position sensors (inductive/magnetic) – approx. 30 pieces. They monitor the opening and closing states of actuators. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete bus system with flexible hos ...

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 400 The scope of delivery includes: 01x Pallet rack stand, used Material color: green Profile dimensions: U 120 x 60 x 4 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled (welded truss) Height: 4,020 mm Depth: 950 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Used HUNDEGGER Speed Cut SC1 Fast cutting machine for various long components. Optimized cutting, drilling, milling, etc. Automatic feeding and execution. Various processing units including tools, as can be seen in photos. - Year of construction 2005 - Immediately available - more photos & video available - Dismantling and loading included - Tools as seen in photos, included. - Separate leftover piece conveyor belt not included.

Key data: 3200 mm, 85 mm

SCM GABBIANI Galaxy 85 K - Year of construction 2004 - Immediately available - incl. dismantling & loading Cutting length 3200 mm Cutting depth 3200 mm Saw blade projection 85 mm Speed saw carriage 6 – 60 m/min Pusher speed 0-27 m/min Clamps 7 Main blade 7.5 kW 1 Air table 2500x600 with guide 2 Air table 2500x600

Used HUNDEGGER Speed Cut SC1 Fast cutting machine for various long components. Optimized cutting, drilling, milling, etc. Automatic feeding and execution. Various processing units including tools, as can be seen in photos. - Year of construction 2005 - Immediately available - more photos & video available - Dismantling and loading included - Tools as seen in photos, included. - Separate leftover piece conveyor belt not included.

Key data: 1000 mm, 2080 mm, 3650 mm

ROUTECH Chronos ht - 5-axis CNC - Year of construction 2013 - Table 3650 x 2080 mm - Availability 12.2026 - without tools - Central vacuum system

Key data: 3 mm, 60 mm, 4000 mm

SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2016 - Immediately available - Incl. replacement glue basin - Top condition

Key data: 3 mm, 60 mm, 4500 mm

SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2021 - Immediately available - Top condition

Key data: 3200 mm, 1550 mm

SCM Pratix S15 B - Nesting CNC - Year of construction 2012 - Immediately available - without tools

Weighing station for the food industry, The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/topcontrol/, Type: Weighing scale / weighing station, Indicator: Top Control colour touchscreen, Construction: Stainless steel frame with weighing platform and product tray

The scope of delivery includes: 01x L - Collision protection corner, new Material colour: RAL 1018 zinc yellow / black according to DIN standard Total height: 400 mm Leg length (A): 170 mm Leg length (W): 170 mm Material thickness: 5 mm Required dowels: 4 pcs. Weight pcs.: 6.10 kg Dkobq Aez Nvp Nsazuasu General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Heiber+Schröder Model WPS 1100 WINDOW GLUEING MACHINE with foil carrier DR-1100 max. 800mm x 1100mm, year of manufacture 2005, The machine is in very good condition., Two-knife machine with punching device for side placement, incl. roll rewinder and mandrel shear, Technical data Single-track Double-track, Length A 100 - 760 mm 100 - 760 mm, Width B 80 - 1,100 mm 80 - 530 mm, Length of the foil C 50 - 560 mm 50 - 560 mm, Width of the foil D 30 - 940 mm 30 - 380 mm, Material thicknesses, Cardboard 220 – 600 g/m², corrugated cardboard up to 5 mm thickness, PET / PE (hard film) 0.03 - 0.3 mm, PVC, PE, PS etc. 0.03 - 0.2 mm, Film winding diameter: maximum 500 mm, Core diameter: 70–80 mm, - Max. cutting format: 800mm x 1100mm, - Min. bend format: 80mm x 80mm, - Max. window format: 560mm x 940mm, - Min. window size: 30mm x 40mm, Max. sheet size: 800mm x 1100mm, Min. sheet format: 80mm x ...

CONTROLS   PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE   external diameter min.: 8 mm   external diameter max.: 90 mm Round tube min. 8 mm            max. 90 mm Square tube min. 8x8 mm             max. 80x80 mm Rectangular tube min. 15x10 mm                  max. 60x85 mm

SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 4 kW / 40 mm Spindle 5: Universal / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 3 kW Planing table length: 2,000 mm Condition: Neuwertig Location: Tauberbischofsheim, Germany

cutting diameter: 220 mm saw band length: 2455 x 27 x 0,9 mm cutting width: 230 mm cutting speed: 35-74 m/min m/min total power requirement: 1,2 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 1,6 x 0,9 x 1,8 m The GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation. Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements. Key features: - Miter cuts up to 60° to the left - Two-stage selectable cutting speed: 35 +  ...

Manual ham press in stainless steel, Volume approx. 90 litres, with 3 plastic boards, 33 stainless steel brackets, Total dimensions LxWxH approx. 70x40x90cm, weight approx. 63kg, good used condition

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, panel saw -Manufacturer: SCM HOLZKRAFT, Panel saw type minimax SC 2C VRS-08 -Main motor: 4 kW -Pre-scoring motor: 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -max. Cutting height: 90° 100 mm / 45° 79 mm -Miter cut: up to 45° -Cutting width: 920 mm -Table length: -Overall dimensions: 2430/1810/H1030 mm -Weight: 390 kg

Offer 26249 Technical data: - Max. cutting width 2030 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Front angle stop - Front support arms - Back gauge 5 - 750 mm - Footswitch - Drive 400 V / 4 kW - Pneumatic connection 6 bar - Space requirement approx. W 3600 x H 1250 x D 1900 mm - Weight approx. 4 t

Key data: 40 t

Machines from the die-cutting production sector for the processing of coil coil material up to 1mm material thickness for the production of strip goods such as contact plugs for the general electrical and automotive industry. For sale are various high-speed presses from Schaal from 12kN to 40kN. In addition, various material coil unwinders from Huras-Stanzautomation can be purchased. In addition, various automatic winding machines from TF-Wickeltechnik and Huras are for sale. In addition, various pereferie devices can be purchased.

Key data: 2000 mm, 600

Surface Grinding Machine - Horizontal ELB-GRIND Perfect BD 20 SPS Used machine as good as new Machine was completely rebuilt Control cabinet new, motors new, wiring new, control system new Hydraulics new, fairing new, Grinding length: 2000 mm Grinding width: 600 mm Workpiece height: 600 mm Table clamping surface: 2000 x 600 mm Grinding wheel dimensions: 400x100x127 mm Grinding spindle motor: 11 kW Table speed: 2 - 30 m/min Grinding wheel speed: 5 -35m/sn Total power requirement: 25 kW Machine weight approx.: 8 t Approx. space requirement: 5.8 x 2.5 x 2.5 m General overhauled in 2026 with 12 months warranty Paper filter machine Oil cooler Adjustable feet Line-up included Instruction included

Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader,, Quinto software, version 4.3b,, Software for cylindrical cutters,, Software for conical cutters,, Software for hemispherical conical cutters,, Software for two-flute cutters,, Software for three-flute cutters,, Software for hob cutters,, Software for up-and-down cutters,, Software for wood drills,, Software for tools with an axial angle,, Software for taps,, Software for step drills,, Software for drills, types H and S,, ISO axial software,, ISO spiral software,, Elbaron electrostatic mist extractor,, Hydraulic workpiece clamping,, Renishaw measuring probe,, Automatic fire-extinguishing system,, Automatic centralized lubrication system,, Glass scales on the linear axes,, 1 loading pallet,, 16 grinding wheel flanges,, 4 collets,, 1 collet chuck,, 1 automatic 5-jaw chuck, PMH., X-a ...

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1320 KG, 2250 mm, 2500 mm

SSI Schaefer DR20 flow rack – 26 compartments available For sale is a used flow rack (package/general cargo flow rack) from the quality manufacturer SSI Schaefer, type DR20, built in 1995. Technical data: • Field length: 2,255 mm • Field width: 2,500 mm • Field height: 2,500 mm • Bay load: 1,320 kg Equipment of the fields: Variant 1 (9+9 fields): • 3 and 4 levels • 10 roller strips + 4 dividers per level • Load capacity approx. 250 kg per level Variant 2 (8 fields): • 4 levels • 3 levels with bevelled sheet metal slope for optimal goods supply • 10 roller strips + 4 dividers per level • Load capacity 200–330 kg per level The racking system works according to the FIFO principle and is ideally suited for the dynamic provision of cartons, containers and small load carriers in picking, assembly or shipping. Sales Not ...

Spindle moulder with tilting shaft Scm mod. Used T150K Strip recovery unit KW 2.2 spindle moulder guide that can be excluded from the work surface Driving position adjustment with handwheels and mechanical height displays spindle moulder motor HP 7.5 Automatic star/delta start with rotation reversal Shaft rotation 3000/4500/6000/7000/10000 rpm Removable front guide spindle moulder shaft inclination -10/+45° length of shelves mm. 2550 d. max profiling tool d. 250 mm. Fast sector table to replace the rings on the table Weight kg.745 Dimensions mm. 2550x1200xH1300 CE

Scm Sandya 5 sanding machine mod. 5 RR 110 used useful working width mm. 1100 I° calibrating roller belt in ground ribbed steel II° sanding roller belt rubber hardness 45 Sh Automatic positioner with vernier single motor X the two belts kw 11 Automatic belt centering nr. 2 belt feed speed Digital viewer Job quota CE

Key data: 1000 KG, 1200 mm, 2300 mm

SSI Schaefer R3000 shelving unit – 45 compartments with depth extension and inclined support For sale are 45 fields of a used shelf from the quality manufacturer SSI Schaefer, System R3000. Technical data (per field): • Length: approx. 1,300 mm • Width: approx. 1,200 mm (with depth extension) • Height: 2,300 mm • Shelves: ZB361315, size 1,280 × 600 mm • Number of shelves: 6 pieces per field • Floor load: 150 kg per shelf • Design: with depth extension + 600 mm as an inclined support The tried-and-tested R3000 plug-in system enables quick assembly and flexible adjustment of the shelf heights. Due to the depth extension and the inclined support, the shelf is particularly suitable for the clear and ergonomic provision of cartons, containers and small parts. Bay load: 600–1,000 kg. Sales Notes: • Commercial sales • Invoice with VAT ...

Replacement Welding Controllers for Resistance Welding Machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Replacement Welding Controllers 19" for Resistance Welding Machines MPS 8043/1 MPS 8043 ÍQ Portrait MPS 15043 MPS 15043 IQ

Gas supply: natural gas from the public gas network, gas treatment: drying using a molecular sieve, max. refueling pressure: 300bar(g), natural gas compressor station capacity: 630m³, storage type: SP28, storage pressure: 300bar(g), inlet pressure: 2.5-700mbar(g), storage type: SP28, storage volume: 2.24m³, storage pressure: ≤300bar(g), compressed air/gas supply (Pₛ,in/Pₛ,out,EGT): 1bar(g)/300bar(g), temperature range: -10 to 50°C/-10 to 60°C, volume flow rate: 74-113Nm³/h, power consumption: 36kW, noise level: 65dB(A) at a distance of 1m, length: 4,850mm, width: 2,690mm, height: 3,100mm, weight: approx. 30t, including documentation.

Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot located below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Key data: 3100 mm, 1 mm

used Schechtl folding machine, with factory-repaired control, CNC control (without graphics) with motor stop, foot switch, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3100 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Back gauge (max.): 8 - 1000 mm Colour: grey/blue Total power requirement: 16 A Dimensions: 4207 x 1842 x 1745 mm Machine weight: 3100 kg Upper beam stroke: 140 mm Opening width: 140 mm Bending angle (max.: 160 degrees Underbeam adjustment yes Machine number: MA 6041

Key data: 3200 mm, 1 mm

used Schröder motor-swivel bending machine, with the following equipment: - Stop package POS 2000 Prof. conical bending - Back gauge, motorized 1000 mm conical - 12 stop fingers - Removable support plates, retractable - POS 2000 Professional control on the swivelling panel - Pneumatically lowerable stop fingers - Bending beam offset to the rear, s= 2.0 incl. bending rails offset, 15 and 25 mm - Remote maintenance (connection via RJ45 network cable must be provided by the customer) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel:1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Back gauge (max.): 1000 mm Colour: grey Total power requirement: 32 A Dimensions: 4450 x 2000 x 1850 mm Machine weight: 2700 kg Upper beam stroke: 150 mm wi ...

Key data: 3100 mm, 1 mm

used Schechtl swivel bending machine, foot pedal, hand roller scissors on of the upper beam, powerful machine for good pressing results, Sloping upper beam for plenty of tread clearance Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 3100 mm Blechstärke Stahl/sheet thickness steel 1.0 mm Blechdicke Alu/sheet thickness Aluminium 1.5 mm Blechdicke VA/sheet thickness Stainless 0.6 mm Backgauge (max.)/Backgage without Farbe/Colour grau/ blau Space requirement approx. 3850 x 900 mm Machine Weight: 1300 kg Oberbolenhub/upper beam stroke 130 mm Roller shear/roller shear without Cutting device yes Roller shears Öffnungsweite/opening width 130 mm Bending angle (max.)/bending angle 160 degrees Underbeam adjustment yes Back gauge (min,) no Maschinennummer/machine number HB27132

SCHAUBLIN 102-80 ist eine Werkzeugmacherdrehbank von hoher Präzision mit großer Genauigkeit und Zuverlässigkeit. Arbeitsmaße: Spitzenhöhe 102 mm, Spitzenweite 375 mm, Drehdurchmesser über Planschlitten 120 mm, über Bett 200 mm. Technische Daten: Spindel 12 Stufen 40–3000 t/min, Spannzange Typ 20 W, Reitstockkegel 2 CM, Spindelmotor 1.5 CV, Anschluss 50 Hz 3x 380 V, Gesamtleistung 2 CV, Gewicht ~500 kg, Abmessungen L1200×B600×H1300 mm. Erreicht enge Toleranzen; Einsatzbereiche: Uhrenbau, Automotive, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

I am selling a panel sizing saw SCM SIGMA PRIMA 67 P. built in 2017. Cutting surface 3300x2200mm + rear lift table. Cutting height 67mm. Main motor 9.0 kW Scoring motor 1.3 kW Max saw blade diameter 320 + 160mm Joint area W.5400mm x D.9900mm 9 pcs grippers with pneumatic regulation Side positioning roller from above. Wincut optimization software included. Very good condition. Available same.

band width:1050 mm plate thickness:8 mm number of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mm FEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mm LEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/min ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOA ...

grinding length:600 mm centre height:180 mm swing dia.:360 mm workpiece weight:80 kg max. dia. of grinding wheel:500 mm grinding wheel width:80 mm grinding wheel hole diameter:203,2 mm peripheral speed:45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system.

workpiece diameter:26 mm swing diameter:- mm workpiece length:66 mm total power requirement:12 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.