sc used for sale

Thermo Fisher Scientific/Dionex Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3,000 ml/min (capillary) Accuracy of flow rate: < 0.1% Precision of flow rate: < 0.1 % Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used Scope of delivery: (See pictures as pictured) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Karl Schnell KS FD 175 Type 112 Emulsifier, 37 kW, 175 mm, hopper capacity 140 liters, output 2500 kg/h, 2955 rpm. You are very welcome to test the machine in our facility in Koblenz, Germany.

Price per piece! Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 140 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 4,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. B2xwaxdlj8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf in ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Price per piece! Currently in stock: approx. 51 pcs. Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 110 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 3,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed S ...

Bitzer Screw Compressor NEW Type HSK 7471-90-40P Stroke volume 250cbm/h 90 hp electrical power. New

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Saeed empty pallet magazine with roller conveyor

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Kuhse control cabinet for CHP incl. breaker 800A

PLC for Desma presses

Included in delivery are: 01x closure lid, II choice Material color: green Material: Metal Dimensions: approx. 520x320x35 mm (LxWxH) Net weight: approx. 2,481kg Technical data for the closure lid: Manufacturer: SSI Schäfer Type designation: VD-14/6-A 4 closure tabs suitable for: SSI Schäfer 14/6-A General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own  ...

Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-088-064-25CEL QV71|71|3 Clear width: 880 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

surface planer , thickness planer , spindle moulder . machines SCM L'Invincibile second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 l'Invincibile : useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 surface planer model SCM F52 l'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 l’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50

Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price

1500 m² mezzanine Schäfer R3000 3-storey Used goods, top condition, as good as new, see pictures Ground floor mezzanine steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick ...

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,208.8 mm Center-center hole: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,249.2 mm Middle-center hole: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Stichelbock, Stitch Grinding Machine Scripta, very good condition, Collets. More information on request Special price

We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,304.4 mm Center-center hole: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Shadmueller Electric motor for steering support from a forklift Still / Wagner Type R100 / 0.4 23.5 volts. 25 Ampere 0.4 KW 2950 rpm Dc motor The engine comes from the steering support of a push-mast forklift. Special price

NEW diesel engine Scania Dc13-72A incl. Starter to exchange give old Scania engine DC12 Power: 1500/1800 326/372 kW MIW GmbH Motoren-Instandsetzungs-Werk North-West-ring 8 D-27404 Zeven/Germany Tel:0049(0)4281 950583 Fax:0049(0)4281-950585

properties Used belt conveyor from the manufacturer Schulz Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 1 pcs. in stock specifications: Dimensions of the belt conveyor Total length: 7.480mm Total width incl. motor: 640mm Total width without motor: 420mm Steel frame Frame Height: 50mm Side guide: 30mm high Color: Orange/Stainless Steel Belt must be glued on site Information about the belt Belt width: 400mm Strap Type: Smooth Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front ...

We offer you here Bros. Ice devices of shards of to wireless. If you are interested and for more information we are available.

A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price

Rotation cutter Built in 2006; working condition

16 diodes

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Schmedt Praecoll; good condition; 2.glue basin; Block width 110-450mm; Block height up to 345mm; Blockstaerke up to 82mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I ; working condition

Scanvaegt model: RF5 checkweigher serial: BMP01014 2009, stainless frame, weight range 600g - 5000g, up to 40 packs per min, max product 300mm x 220mm, total length 800mm

Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.) ; working condition

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 760mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 760mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2295 / piece Number available: 12 pieces

calibrating sanding machine SCM SANDYA 16S - 135 second hand machine carpet in rubber max. working width mm. 1350 machine composed by 2 belts : 1° belt : roller in rubber diam. mm.200 . shore 80 2° belt : combined roller in rubber diam. mm.160 . shore 35 + electronic pad belts size mm. 2620 x 1370 motor power Hp 20 volt. 380/50

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 610mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 610mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2050 / piece

Air-wifer with approx. 3750 m3 throughput / h

Curve lathe SCHWERDTFEGER UA20 - see picture

2 stueck fraesmaschinen SCHAFFNER F.17.34, table 750 / 180, with double vertical freskopf Further: 2 piece SCHAFFNER 17.3 also horizontal

2 pieces of SCHAFFNER F.17.34 milling machines, table 750 / 180, with 2-fold vertical milling head Further: 2 pieces of SCHAFFNER 17.3 also horizontal milling possible

Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

Te Koop: Manifpld Scanio flow equipment. Mixproof valve. Type SN, 1.5 duims en 2 aansluitingen 38 12A.