sc used for sale

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table diameter: 600 mm grinding height: 600 mm grinding head - power requirement: kW workpiece weight: 300 kg grinding wheel diameter: 600 mm power spindle motor: 15 kW grinding height: 600 mm Control: SIEMENS STC weight of the machine ca.: 19 t dimensions of the machine ca.: 4,7 x 3,6 x 2,5 m Equipment & Accessories ? Wet grinding unit with universal paper belt filter, discharge container and magnetic separator, tank capacity approx. 500 l ? Electrical cabinet with digital drives SIMODRIVE 611D ? Coolant Mist extractor ? Recooling unit for grinding spindle motor ? Fully closed machine enclosure ? Central lubrication ? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of the machine ? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due to lack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via push b ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire diameter - max.: 2 mm wire diameter - min.: - mm workpiece length - max.: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrale de cogénération 250 kW – Schnell – moteur Scania – conteneurisée À vendre / disponible pour réemploi : centrale de cogénération industrielle de marque Schnell équipée d’un moteur Scania modèle DC13B-PDE. Caractéristiques principales : Puissance électrique : 250 kW Moteur : Scania DC13B-PDE Heures de fonctionnement : environ 3000 h Configuration : installation conteneurisée Application : production d’électricité avec récupération de chaleur (cogénération) État : matériel industriel d’occasion Cette unité est adaptée pour différents projets énergétiques : biogaz, gaz naturel, installations industrielles, exploitations agricoles ou projets de production d’énergie. La centrale peut être fournie avec équipements électriques associés selon disponibilité Photos, informations techniques et conditions disponi ...

Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...

General SKU300U1007 MakeHeraeus TypeVT6025 No.97106865 Year of construction1997 LocationBarneveld Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume25 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Number of compartments:1 Capacity25 Ltr. Internal width300 mm Internal depth307 mm Internal height275 mm Electric heating1,3 kW Number of doors:1 MaterialStainless steel General Floorspace0,48x0,45 m Total height0,60 m Weight60 kg CEcheck Extra SpecificationsChamber dim. 300x275x307 mm, volume 25 ltr, temp range max 200°C, klasse 2Consumer wastePaints & coatingsPowdered foodsDrying ovensGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.Othe ...

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.

Automatic small parts warehouse (AKL) with conveying technology for E3 - boxes (600x400x320mm), designed for 6 days per week, 2-shift operation,, Goods receipt: 60 - 200 containers per hour (intermittent),, Storage capacity: 14,000 containers - parking spaces,, Footprint: Length x Width x clear height: 72.00 x 52.00 x 13.80 m,, Description in the attached Word document.

Thermo Fisher Scientific Versa Weigh GVW0 V312 – Automatic Checkweigher, Manufacturer: Thermo Scientific, Model: Versa Weigh GVW0 V312, Serial number: E307, Year of manufacture: 2019, Machine type: Automatic checkweigher, Description, The Thermo Scientific Versa Weigh GVW0 V312 is a high-precision automatic checkweigher designed for dynamic inline weight control in modern production and packaging lines. The system ensures accurate weighing and compliance with strict quality standards., This checkweigher is built for high-speed production environments and is commonly used in food, pharmaceutical, and consumer goods industries., Technical Specifications, - Manufacturer: Thermo Scientific, - Model: Versa Weigh GVW0 V312, - Serial number: E307, - Year: 2019, - Supply voltage: 230 VAC, - Frequency: 50–60 Hz, - Power consumption: 600 W, - Accuracy class: XIII (1), - Operating temperature:  ...

Find more here - .ucymachines/ Contact us at - sales@ucymachines

spindle taper: 2 x SK 40 forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm workpiece dia. with double equipment: max. 135 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coo ...

Key data: 3140 mm, 1 mm

new Schechtl motorized guillotine shears, with the following equipment: - within the EU: 32 amp connection plug with 5 m cable - 1 pair of steel scissor knives (single-edged) - Manual depth stop 0-750 mm with pneumatically operated tilting table, Laying down to the front - Support plates with 10 mm graduation and tape measure - Footswitch - Three-sided safety cage around the depth stop - Compressed air must be available: min. 6 bar, max. 10 bar - approx. 50 l/min - Cut-gap illumination - Electronic position display - Contact stroke counter tico 731.3 - Sheet metal stacking trolley light max, load capacity 300 kg Working length 3140 mm 20 Sheet thickness steel 1.5 mm 30 Sheet thickness Alu 2.25 mm 40 Blechdicke VA/Sheet thickness stainless 1,0 mm 50 Maschinennummer/Machine number MT 13952 Working length: 3140 mm Sheet thickness steel: 1.5 mm Sheet thickness alumi ...

AUTOMATIC DOUBLE END TENONER machine model SCM D80 second hand machine max. working length mm. 3000 composed by n.03 + 03 working unit : 1+1 scoring unit 1+1 hogging unit 1+1 milling unit volt. 380/50

Tenon cutting and slitting machine No further data known

The Octopus sanding dust extraction table is ideal as a work table for dust-free sanding work. With its different footprints of 1.3 to 3.3 m², it offers a safe contact surface for both small and large workpieces. The work surface is made of trapezoidal pressed sheet steel with dust extraction openings and coated with resistant felt in a workpiece-friendly manner. Extraction connection: 200 mm Table length: 3280 mm Weight 200 kg

Used SCANIA DC16 in parts Cylinder heads completely overhauled Missing: - Starter - Alternator - Crankshaft - Engine block - Camshafts

Key data: 100 KW, 220 kVA, 400 V

Kuntschar & Schlüter gas-fired CHP GTK 100 Gas electricity and heat generators from 2016, 46,197 operating hours, with electrical cabinet and silencer. 94 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Kuntschar & Schlüter Model: GTK 100 Type: Natural Gas CHP Serial number: 01345 Engine: HMG 645 S Engine power [KW]: 100 Electric power [KW]: 94 Thermal power [KW]: 143 Year of Make: 2016 Hours: 46,197 Dimensions LxWxH [m]: 3.5 x 1.05 x 2.00 Total unit weight [kg]: 3,850 AC Generator: MarelliGenerators MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MDMO1565 Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 318 Speed [1/min]: 1,500 Year of Make: 2016 Hours: 46,197 Weight [kg]: 650

TECHNICAL SPECIFICATIONS Manufacturer: WEBER Kunststofftechnik Description: Sludge thickener Year of Make: 2025 Usable volume: 28.50 m³ Material: PE-100-RC-WK-S-8000 Permissible. Volume flow: 30 m³/h Inner container dimensions: Ø 2,800 x 5,496 mm Max. filling height: 5,270 mm Operating Pressure: Pressureless Filling medium: Sludge (density approx. 1.10 g/cm³) Permissible. Operating temperature: 20°C, max. 30°C for short periods Agitator: TURBO mixer type NFL4E FG 13/77 (4.0 kW) SPECIFIC COMMENT - Mint condition, never been in use

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.08.2003 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Drive: 6 x 2 Certificate of Registration: EM250897

In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.04.2006 Category: Truck Body name: semi-trailer Exterior color: green Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Transmission: Manual Drive: Rear Certificate of Registration: EN403451

General SKU221Y083 MakeNetzsch SerialD4095257/6300005469/0100 Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Eccentric Screw Pumps MaterialStainless steel General Year of construction2021 LocationBarneveldPaints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed additivesInd ...

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: K Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,520 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 60 pcs. Total number of pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 5,800 mm Depth: 1,100 mm 30x Pallet rac ...

used circular knife Schickart circular knife, replacement knife for Schickart bread slicer. Diameter of 25 cm.(Photo may vary)See pictures for details.

Knife Herlitzius (A 130) for bread slicerKnife (A 130) from Herlitzius for bread slicer, is used. Dimensions W.: 45 cm, H.: 28 cm (photo may vary)Herlitzius knives are known for their high quality and are often used in commercial bread slicers. Model A 130 presumably refers to a specific knife size or design that fits different machines. These knives are typically made of high-quality steel and need to be sharpened or replaced regularly to ensure a clean cut.

Herlitzius 91 Cutting Knife Sickle Knife for Bread SlicerFor Herlitzius 91 Bread Slicer, is used. Exterior dimensions W.: 51 cm, H.: 25 cm(photo may vary)The Herlitzius 91 impact knife (sickle knife) is a replacement knife for bread slicers, especially for Herlitzius brand models.Features:Type: Sickle knife (impact knife)Model: 91Material: High-quality steel for long durability and sharp cutting performance Use: Ideal for commercial and industrial bread slicers Compatibility:The knife fits various

Herlitzius 41 3 Impact Knife Sickle Knife for Bread SlicerFor Herlitzius 41 3 Bread Slicer, is used. Exterior Dimensions W.: 44 cm, H.: 20 cm(Photo may vary)The Herlitzius 41 3 Impact Knife (Sickle Knife) is a replacement knife for bread slicers, especially for models of the Herlitzius brand.Features:Type: Sickle Knife (Impact Knife)Model: 41 3Material: High quality steel for long durability and sharp cutting performance Use: Ideal for commercial and industrial bread slicers Compatibility:The knife fits various

Bread slicer Schickart TS 38Product descriptionManufacturer: SchickartType: TS 38Condition: used, functional, bakery conditionMaterial: stainless steelOn castors, mobilePower supply: 400 Volt / 0.75 kWDhe Schickart TS 38 is a bread slicer manufactured by the company Schickart. By using a bread slicer such as the Schickart TS 38, working time can be reduced and productivity increased. Details see pictures

Bread slicer Schickart TS / 30 plus stainless steel â Product description âœ" Manufacturer: Schickart âœ" Type: TS / 30 plus âœ" Condition: used, functional, baker's condition âœ" Material: stainless steel âœ" On castors, mobile âœ" Power supply: 400 Volt / 0.75 kW Details see pictures

Continuous conveyor  inclined conveyor Manufacturer : Lippelt Type : Inclined conveyor Year of construction : 2010 380 V 50Hz 0.12kW On castors Dimensions : W:77cm D: 157cm H: 126cm Belts width 60cm Details see picture    

A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.

Year of construction/ retrofit 1995/2025 Bag in Box packaging machine (cartoner) Bosch, type CBK 409.1 BL / SCK 2500, year of construction 1995 (retrofit 2015) Folding carton formats (LxWxH): 143 x 60 x 218.5 mm 143 x 51 x 220 mm 143 x 46.9 x 219 mm 138.4 x 49.9 x 173 mm Condition: fully functional, well maintained Machine weight: 5600 kg Current formats: see documents Instruction manual: see documents

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3740 Botec-Scheitza drill mount for auger and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism (rotary motor only), 20 m drill rod 110 mm (without drill head) Drilling rig for worm and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism (rotary motor only), 20 m drill pipe 110 mm (without drill head)

number of spindles: 8 spindle passage: 36 mm turning length: 250 mm spindle bearing diameter: 358,2 mm bar material dia.: 36 mm bar length: 4000 mm longitudinal slide -travel: 145 / 250 mm cross slide - travel: 80 mm spindle turning speed - stepless: 560 - 4000 U/min spindle motor: 28 kW Total weight, approx.: 8500 kg dimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm - Beckhoff CNC control system (Win2000) - IEMCA 4m bar feeder (PRA52/P-Typ42) + Hydraulic catch chute + Mechanical end-piece chute with container + Parts conveyor belt + 3–4 bar oil connection + 100 bar high-pressure connection + 1 HYDAC hydraulic oil cooler + 1 oil cooler for cutting oil + 1 chip conveyor + 1 magnetic roller for sludge removal + 1 new air conditioning unit for control cabinet / year of manufacture 2025 + Feed block: new brass strips fitted in 2023, making the machine as good as new + Spindle coup ...

An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible.

CONTROLS   electronic controls SCHMIDT PRESS FORCES   total force (nominal): 0.25 to PRESS TABLE   table surface (left-right): 180 mm   table surface (front-back): 150 mm SLIDE   slide force: 0.25 to   stroke: 100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

ITEM NO. AT100FU-EC - Year of construction 2017 - Flow rate 1 000 / 10 000 ltr./h - Speed 900 / 1 429 rpm - Thread DN 40 - 1 year functional warranty

A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible.

Used plate-pressure filter for diatomaceous earth from Schenk type S 20. Maximum operating temperature 100 °C. Capacity 1100 liters. Operating pressure 5 bar. Acid-resistant design. Manufacturer's documentation.

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacket34 l. &: 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General Year of construction1989 Mounted on framelegs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperOils & fatScraped surface heat exchangersOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPITerletIndustri es > Food & Feed > Oils & fatHeat exchangers > Scraped surface heat exchanger ...

General SKU322X550 LocationBarneveld CEcheck Main Features Volume50 Ltr. Specified Features - Rotary evaporator MaterialGlass General MakeGenser Scientific TypePILV50-DRV Floorspace1,30 x 0,90 m Total height2,25 m Extra SpecificationsInstallable rotating bottles, 6, 10, 20 and 50 l.Disstillation performance of water at 60 degree C,m heating bath temperature, approx 6,5 l/hWith:Rotary piston 50L and lifting deviceFlange with a nominal width of 120mmElectronic drive unitCooler with 1.2m² cooling surfaceReflux device. mechanical seal systemStainless steel heating bath. Speed controller with displayVacuum regulator. anti-implosion hoodDistillate vessel, capacity 20LHeating bath and steam temperature controllerTrolley for PILOTVAP-50Vacuum pumpOils & fatPaints & coatingsTea, herbs & coffeeFine chemicalsBiotechnologySpicesFeed additivesSolventsDetergent & surf.Food additivesLubr ...

Key data: 6 mm

Used Schütte SF32 Multispindle Automat Lathe with large number of spare parts and accessories! We sell 3 pieces of Schuette machines, with total 16 pallets of spare parts and accessories. More photos is added soon. Please ask more information if interested. Schuette SF32 - 6-Spindel - Drehspindelstillsetzeinrichtung - Schnecken Späneförderer - Gewindeschneideinrichtung mit Rücklauf

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg