sc used for sale

- set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE - Jaw width 90 mm - Jaw height 75 mm - Hole to hole jump length ways 125 mm - Hole to hole jump in width 250 mm

- set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE - Jaw width 90 mm - Jaw height 75 mm - Hole to hole jump 125 mm

- CNC Dresser KW with Siemens 840D new in 2002 - HeidenHain measuring scales - Siemens Servo engines - Crankshaft and External grinding - Large steady rest package - Large stone and flanch package

- Range off edge radius Manual 20 - 500 - Range off edge radius Automatic 150 - 500 - Hydraulic Controllable forming roll drive - Hydraulic displacement drive - Clamping device without hole - Max. pressure manipulator 2000 Psi / 140 bar - Max. pressure press 5700 Psi / 400 bar - Max. speed forming roll 170 M/Min - Basket bottem - Knocker bottom - Pressure vessel bottom - Boiler bottoms - Flat floor - Plate base - diffuser bottom - Tank bottom - Tank bottom - Radar reflectors - Engine parts - Dispense air - Silo hoppers - Cooker hoods - Container parts - Hemispheres

A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.

X-axis: 400mm, Y-axis: 250mm, Z-axis: 200mm, table dimensions: 560x426mm, acceleration: 500mm/s², resolution: 0.1μm, measuring temperature: 20 ±0.5°C, max. workpiece weight: 50kg. Length: 930mm, width: 870mm, height: 1570mm, weight: 530kg. On-site inspection is possible.

Key data: 300 mm

Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg

Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request

High rack stacker, 1250 kg load capacity, approx. 7,850 kg dead weight, with charger. Battery defective. Mast has to be dismantled for transport.

Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.

Length : 1430 mm Width : 620 mm Height : 1540 mm Shrink tunnel : (l)850 x (h)600 mm Kind of strap : polypropylène Strap width : 12 mm

Spindle speed: 9000rpm, spindle tilt: -5°/45°, spindle stroke: 1000mm, spindle diameter: 30mm, table dimensions X/Y: 750mm/600mm, table height: 880mm, weight: approx. 300kg. An on-site inspection is possible.

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...

PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, Constructed in year 2000 - very few hours of work, NEW Crammed feeder new 2023 FF85VE, 60 kw Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, Manual screenchanger, NEW 2023 Water ring pelletizer WF150, Drying centrifuge, Total installed power cutting group 14 kw, Vibro classifier, Total weight about 3 Tonnes, excellent conditions, MATERIALS: PE PP PC PS ABS PS, capacity: ca.200 kg/h depending on materials and feeding rate, availability: ready-to-go

Electronic cards for Schnieder Senator cutter built in 1990. Can ship worldwide.

pressure: 10 t stroke: 8-40 mm no. of strokes: 120-600 Hub/min ram - range of adjustment: 40 mm table surface area: 380x240 mm ram surface: 220x140 mm hole in the table: 220x110 mm table height: 910 mm tool hole in ram: Ø 30 mm throat: 135 mm total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: BxTxH 1000x1500x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

pressure: 7 t throat: 180 mm stroke: 100 mm table surface area: 320x300 mm ram surface: Ø110 mm hole in the table: Ø50 mm table height: 850 mm tool hole in ram: Ø30 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1300x1300x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cup filler, make Schutten, year of manufacture 2005 with lifting and tilting device, - 2-lane rotary conveyor with matching lifting and tilting device for standard trolley 200 l, - Suitable for filling chunky masses (e.g. delicatessen salads), pasty products (e.g. mayonnaise, spreads), - Stations: unstacking cups, filling, sealing, ejecting, - Sealing foil from roll, sealing tool with integrated cutter, - Format set for butchers cups (112 x 86 cm), - Filling capacity: 15 – 35 cycles per minute (corresponds to 30 – 70 cups), power: approx. 19 bars / min (= 38 cups)

Agitator tank, make Schwarte - Milfor, year 2015, unused, for oil and other liquids,, stands on load cells,, Content: 1,000 liters, Inside diameter: 1,000 mm,, cyl. height: 1,250 mm,, outlet height: 500 mm,, single-walled/uninsulated on the top floor,, double-walled / insulated on the cylindrical shell and underbody,, with pressure-resistant heating/cooling system, Jacket space: 30 liters,, Permissible operating temperature: up to max. 85°C.

Salt spray test by Weiss Salt Spray Test Chamber with Corrosion Testing Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: Room temp. up to +50 °C Condensation water test: Room temp. up to +45° Extensive documentation available incl. wiring diagram, parts list, manual, etc The plant is still fully functional. It is located in a research facility and has rarely been used.

Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.

Working width: 410 mm Length of the planing table: 1450 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2650x850x1100 mm weight of the machine ca.: 750 kg Surface planer F 410 N ----------------------------- Technical manufacturers description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----------------------------- Price of the above machine on request! -------------------------- ...

faceplate diameter: 5500 mm swing diameter: 6000 mm turning height: 4400 mm turning speeds: - U/min main drive motor: - kW Control: FAGOR 8055 workpiece weight max.: 100 t ram stroke each side: 1500 mm cross rail - adjustment: 3000 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m equipped with: - CNC Control 8055 - 1ram on Crossbeam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 14300 mm y-travel: 4100 mm : 1000 mm : 2500 mm : 900 mm : ISO 50 : 5,5 - 1000 U/min : 55 kW : 4000 x 3500 mm : 60 t control: Fagor 8055 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - Fagor 8055 CNC control - CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t - Coolant system (external) - Telescopic covers for the guideways - Operator platform attached to the spindle box - Plate field 2x 6000 x 2000 mm each The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm turning speeds: U/min main drive motor: 70 kW Control: FAGOR 8070 workpiece weight max.: 20 t column daylight: 3300 mm milling motor: 16 kW feeds crossrail-slide vertical: 3000 mm/min feeds crossrail-slide horizontal: 3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC Control FAGOR 8070 - C-axis (angular positioning of the table) - angular milling Head - Telescopic covers of the cross rail and columns guideways - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...

For MUSSANA Whipped Cream Pump for Older Models NEW Unused

Subject to prior sale - errors possible Internal reference number: D-1143-6

Water cooler

We offer a high-performance mobile extraction system for painting work. The offer includes a new filter mat. Engine power 2.5 Kw Device can be tested on site. Forwarding possible by arrangement. No indication of VAT in accordance with § 19 UStG (small business regulation).

4-Wellen Hobelautomat SCM COMPACT 23 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern Kompositionsmaschine : 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2° Spindel und 3° Spindel : rechts vertikal und links vertical . Motorleistung PS 7.5 (Kw 5.5) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 6 / 12 mt./min max. nutzbare Arbeitsbreite mm. 230 max. nutzbare Arbeitshöhe mm. 125 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.5 HP (0.37 kW) Gewicht kg. 1600 Bedienungsanleitung CE-zertifizierung

Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

The plant has 2 application units for solvent-based coating or lamination.  4 drying tunnels  web width max. 1060 mm, Speed max. 180 m/min, Diameter Ab rewinder = 1000 mm, Accessories : Microperforation, Pretreatment 

60 packs/min for 2x2 and 2x3 longneck, Vichy, and NRW bottles 40 packs/min for 2x3 swing-top bottles

Thermo Scientific Incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C

BÜNDER SCHMITT corker, Elec: 400 V, Dimensions (mm): 950x1120 H 1880

Dimensions (L/W/H): 1430x780x980 mm Number of drawer: 10 Stück Number of floors: . 0 Width of floors: . mm Depth of floors: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 700 mm height: 2250 mm quantity: 2 Stück weight: 4200 kg weight max.: 80 t width: 1500 mm The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mm height: 1500 mm quantity: 4 Stück weight max.: 60 t width: 650 mm 4 heavy-duty trestles 700x1500x2250 The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermo Scientific incubator. Sold with 1 filter and a water reservoir cover., Dimensions (mm): 875x640 H 1145, Internal dimensions (mm): 505x440 h 665, Number of shelves: 2, Maximum temperature (°C): 55°C, Sterilization temperature cycle (°C): 180 , CO2 control : ± 0.1%, O2 control: ± 0.1%, Humidity: RH: >_93% @ 37°C

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ...

fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons

5-axis machining center for machining aluminum profiles. Max. length: 7,500 mm Min. W x H: 30 x 30 mm Max. W x H: 400 x 300 mm Description: -Mill -Drill -Saw -Jack -Tapping - Chip machining 16 tool positions

SCM edgebander mod. Used OLIMPIC K1000 control panel with membrane keypad Technical data: Min. height of the panel 8 mm Max. panel height 55 mm Min. thickness of the edge in roll 0.4 mm Max. edge thickness in roll 3 mm Max thickness of wooden edge mm. 12 Composition: Strip edge stock Glue tank capacity kg. 1.5 with independent motor Nr. 4 counterpressure rollers with pneumatic thrust and 1st roller with independent motor Shear cutting edge in roll Trimming unit with 2 independent motors tilting 0-15° - each KW 0.35 - 12.000 rpm Overlapping trimming unit with 2 motors each KW 0.65 - 12.000 rpm - tools with reversible knives Tilting gleaning unit for flat-edge and radius finishing; r. 2 motors each KW 0.5 - 12,000 rpm with electro-pneumatic positioning - tools with reversible knives electropneumatic group override Glue scraper assembly  ...

Piston-valve doser (as good as new) available at short notice. Flyer: - Capacity: 600 - 1200 filling processes/h - Filling volume: 30 – 500 ml - Suitable for liquid and absorbent products - 2 cylinders / 2 filling nozzles - Only pneumatics are required - 50l flow tank - Actuation with foot switch

tube diameter: 273 mm wall strength: 15,1 mm bending radius min.: 150 mm bending radius max.: 1250 mm total power requirement: 30 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

NEW, 240 cm width, 1.01 m³ capacity, SUN version - with welded-in Hardox scraper bar 150 x 16 mm, 351 kg dead weight