sc used for sale

Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

: 200 mm mechanical: ja weight: 1,5 t : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mercedes Benz special vehicle / fire engine 1124 AF, Technical specifications:, - Dead weight: 7,175 kg, - GVW: 12,000 kg, - Displacement: 5,958 cm3, - Power: 177 kW, - hz. Axle loads: 4400 / 7800 kg, - Support load: 80 kg, - unbraked: 750 kg, - Overrun brake: 1920 kg, - other brake: 14,600 kg

Screen AT-T4000, 4-up Conveyor / Bridge

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

Router R8, large table, ready for demonstration from the site.

Size: 0x0 Equipments: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Kövy KA sliced roll line with peeling belt Belt deposition - Kövy KA cut roll line - Sheet metal deposition with take-off belt - 4-row - 380 volts - max. hourly output 4800 pieces

Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

Manufacturer: ASYS Model: INSIGNUM 2000D Scan Year of Manufacture: 2018 TECHNICAL SPECIFICATIONS Nominal Voltage: 230 / 115 VAC Working Voltage: 24 V DC Frequency: 50 / 60 Hz Full Load Current: 1.5 / 3.0 A Number of Phases: 1 Power: 0.32 kW (320 W) Circuit Breakers: 10 A Pressure: Not applicable Flow: Not applicable DIMENSIONS Length: 1.2 m Width: 0.6 m Height: 1.8 m WEIGHT 200 kg NETWORK CAPABILITY Yes CERTIFICATION CE Marked APPLICATION Industrial automation / scanning system Find more here - .ucymachines/ Contact us at - sales@ucymachines

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

Engine Brand: SCANIA, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: SAE 14 , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: NEE , Starter Voltage: 24 Volt , Rated Power: 640 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/scania-di16-90m-core/42359 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.670 kg, Type number: DI16.90M

Engine Brand: SCANIA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 294 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/scania-dc09-074a-new/42368 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 985 kg, Type number: DC09 074A

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Side Tables, Light Bariers, Chromed Air Table, Program, Standard Accessories

Mag Schymanski Bottle Washing Type Sirio 7-10 is a powerful bottle washing machine for industrial bottling plants. It ensures effective internal and external cleaning of glass and PET bottles and meets the required hygiene standards before filling. Adjustable parameters, robust construction and easy maintenance make it a reliable solution for beverage production. Control range 3,600-8000 bph Machine design Stainless Steel Method of operation Continuous Max. bottle diameter 75 mm Max.Bottle Height 290 mm Bottles in machine 1,720 pieces Bottle cell carrier 172 Pieces Cell division 95 mm Chain Pitch 140 mm Power consumption 12.33 kW Fresh water verb. 2,300 ltr./hr at 1.5 bar Heat demand Hourly output x 14.01 = demandin Kcl. Curb weight 12,000 kg Full weight 19,000 kg Length 7,000 mm Width 2,095 mm Height 300 ...

General SKU281W438 MakeLeistritz TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialStainless steel General LocationBarneveld With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones,gear speed 2200 rpm / I=20 rpm,Resotec control, extrusion packPowdered foodsAgrochemicalsPlastic & polymersCos ...

A semi-automatic 1-head pneumatic jar closing machine Lenssen Vul-En Sluittechniek is available. Closing capacity: 720jars/h, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 500mm/500mm/800mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

General SKU340X780 LocationBarneveld CEcheck MakeK-Tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter220 mm Specified Features - Metering screw Metering screwcheck Screw diameter35 mm Pitch50 mm Shaft diameter15 mm Screw length250 mm InletDia. 220 mm OutletDia. 110 mm With DC motor0,45kW, 200V, 2000RPM Without controlcheck Screw speed120-600rpm With breaking/mixing shaftcheck Metering screws MaterialStainless steel 1.4571 (316Ti) General TypeK2m-T35 No.11240198/800890 Year of constructionunknown Floorspace0,85x0,45 m Total height0,4 m Weight50 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsMetering screwsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLu ...

miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From fine to walnut size particles, bespoke made Perfect for larger companies looking to pack dry ingredients between 15g - 5000g. It's larger motor and hopper capacity means it is a lot faster and works better with companies that need a faster packing solution. Just load your ingredients into the top of the hopper, enter your desired weight on the digital display and the intelligent micro-computer will automatically fill your ingredients into your packaging, in a matter of seconds, with a 1 - 5g degree of accuracy, whilst displaying a count of how many have been dispensed. Filling range 15g-5000g Top Hopper Capacity 32L Pack up to 40 bags per minute Accurate to within 1-5g Works with a large variety of dry ingredients

-A fully overhauled HUNDEGGER Speedcut SC2i – BJ. 2008 : - Feed cross conveyor 5 strands. - 5 axle saw. - Vertical combi : 1 x 4 axis turret cutter, 1 x drill rig 2.2KW, 1 x finger tiller 5.5KW. - Combi Horizontal : 1 x Drill 2.2KW - 1 x marking device from below. - Conveyor belt under the machine for disposal to the rear. - Preparation for airborne dust extraction (tube in the machine cabin. Immediately ready for loading. We recommend the construction and commissioning only by Hundegger.

General SKU359W976 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with:-2x k-tron feeders.- control cabinet.- 3x temperature control units.- extruder barrel lift- spare partsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered fo ...

General SKU261W363 MakeAllgaier LocationBarneveld CEcheck TypeTSM 2000/DS/1 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve decks3x 0,710mm-0,400mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) General No.4006 Year of construction1997 Mounted on mild steel framecheck Floor space2,00x2,00 m Total height2,00 m Weight1080 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts  ...

General SKU259P363 LocationBarneveld MakeScan-Vibro A/S (DEN) TypeTRK 600x300x2000 No.27511 Main Features MaterialStainless steel Length2000 mm Width600 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width600mm Feeder length2000 Feeder height300mm Closedcheck Inletdia.200mm Outletdia.200mm, dia.100mm With vibro motor(2x) 0,5KW, 400 Volt (Ex) MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction1997 Mounted on framecheck Floorspace3,0x1,0 M Total height2,5 M Weight615 KG ATEX designedcheck Extra Specificationswith sieve 0.315x0.135 t = 0.2, with (3x) inspection hatch, Capacity 100 kg / h (p = 3.5 Kg / dm3)The bed is jacketed for cooling purposesConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrgani ...

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,040 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,100 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 3,600 mm Depth: 1,050 mm  ...

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: 22,500 mm Number of fields per row of shelves: 08 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 72 pcs. Total pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,100 kg The scope of delivery includes: 09x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm 32 ...

General SKU381X957 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter150 mm Specified Features - Metering screw Metering screwcheck Screw diameter2x 35 mm Pitch10 mm Shaft diameter40 mm Screw length400 mm Capacity± 50 l. Hopper sizesø 200/400x880 mm Inletø 150 mm Outletø 100 mm With DC motor0,45 kW, 200 volt, 2000 rpm, With breaking/mixing shaftcheck Metering screws MaterialStainless steel 1.4301 (304) General TypeK-ML-KT35 Atex No.310358/MO-73640 Floorspace1,10 x 0,70 m Total height1,30 m Extra SpecificationsWith LWF D5 platform scaleOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsMetering screwsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmet ...

Material width 150 mm, material thickness 0.5 -3.0 mm Colour: green Total power requirement: 380 V Weight: 350 kg Dimensions: 800 x 1200 x 1350 mm Roller diameter: 24 mm Machine number 700257

Key data: 3000 mm, 8 mm

3-roll bending machine / round roller Schäfer SRMVHY – fully functional For sale is a used 3-roll bending machine (round roller / sheet metal bending machine) from the manufacturer Schäfer, model SRMVHY, built in 1992. The machine is in fully functional condition and is ready for immediate use. The rollers are hydraulically adjustable, which allows for precise and comfortable adjustment. The round bending machine is ideal for bending sheet metal in workshops and production plants. Technical data: Manufacturer: Schäfer Model No.: SRMVHY Year of Make: 1992 Max. sheet width: 3,000 mm Max. sheet thickness (mild steel): 8 mm Roller diameter: approx. 200 mm Voltage: 380 V Dimensions (L x W x H): approx. 5,300 x 1,800 x 1,300 mm Condition: used, fully functional Equipment: hydraulically adjustable rollers Changes and errors in the technical data, ...

General SKU244X191 MakeKöllemann TypeDT KSF 2XDN300 5500 lg LocationBarneveld CEcheck Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm MaterialMild steel With jacketcheck General No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Floorspace8,0x1,10 m Total height2,0 m Weight2800kg Extra Specificationsthe screw is coolableConsumer wastePowdered foodsTea, herbs & coffeeStarch ...

Winkelanlage Schneider Type: SK-Z3 Milling spindle Diameter 30 mm; motor with 4.8/5.6 kW and 1450/2900 rpm Spindle clamping length 150 mm Tool diameter maximum 200 mm Table size 1150 x 850 mm Extendable table support length 2000 mm Slotted spindle Diameter 40 mm; motor with 4.6 kW and 2830 rpm Spindle clamping length 130 mm Cross-cut saw with carbide-tipped saw blade; Motor 3 kW and 2860 rpm Tenon table Dimensions 780 mm x 330 mm With stop rail, with pneumatic workpiece holder Travel 2000 mm 3 suction connections 1 milling fence with fine adjustment, DBGM SH-System 90/1 from S. Hoomann GmbH with 3-roller feed Dimensions Dimensions 3100 mm x 2000 mm x H 1500 mm Weight 1200 kg Packing Dimension 1 pallet 2000 mm x 2200 mm x H 1500 mm Weight approx. 1000 kg 1 pallet 1200 mm x 800 mm H 1000 mm Weight approx. 200 kg

M.Nr. AH/0002544 Ref: 103615 Year of Make: 2020 Motor data: 380 V - 50 Hz - 26 A Top control panel Pre-milling unit Glue basin - PU suitable - with spout Cross-cut station Pressure zone double sawing unit Milling unit top/bottom rounding Corner Copying Wing Scraper Radius Scraper Spraying device Buff Panel thickness: 8 - 50 mm Roll separation: 0.4 - 3 mm Feed rate approx.: 11 m/min Compressed air approx.: 8 - 10 bar, Central suction nozzle on the distributor: 1 x 200 mm Extendable support rail Weight approx.: 1200 kg External dimensions L/D/H approx.: 4600/1400/1700 mm Inspection and delivery date by arrangement. Prior sale and errors excepted. The price includes VAT! Product safety SCM Group Deutschland GmbH Woodworking Machinery Seilerstraße 2, 72622 Nürtingen 07022 92540

General SKU212X067 MakeMinox LocationBarneveld CEcheck TypeMTS 2000/2 Main Features MaterialStainless steel Surface2.5 m2 Sizes diameter1800 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,5m² Number of sieve decks:2 (1,5mm-1,2mm) Sieve sizesDia. 1800 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive excentercheck Motor2,2 kW, 220-240/380-420 volt, 1425 rpm With extra sieve decks3x ( 0,2mm-0,8mm-1,25mm) Tumbler screening machines MaterialStainless steel 1.4301 (304) General No.9518 Year of construction1997 Mounted on mild steel framecheck Floor space2,40x2,40 m Total height1,90 m Weight1200kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.O ...

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 22,440 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 28 pcs. Pallet spaces per row of racks: 168 pcs. Total pallet spaces: 168 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg Max. bay load: 19,000 kg Lower clearance height: 1,080 | 880 mm The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P215 Profile dimensions: 120 x 100 x 2.5 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled ( bol ...

Drilling and milling machine Hans Schreiner ZAY7040G, built in 2009, very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle, tapered roller bearings and v-ledges. Camlock mount C4, top slide ratatable by 360°, tailstock adjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Center height 140mm Distance between centers 650 mm max. turning diameter 289 mm Spindle bore 38 mm Spindle cone MK 5 Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPM Speeds 2 Main motor power 1,5 kW S6 Voltage 230 Volt Weight 230 kg Standard equipment: 3-jaw chuck 160 mm with changeable jaws for internal turning center point Optional equipment: 2 axis digita ...

Lathe Hans Schreiner MDB-S900, YOC 2015, good condition, 1.5 kW , 900 mm center height, 165 mm center height, 65-1810 rpm, 500 kgPrices subject to change, errors, printing and typesetting errors excepted

Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E

Hans Schreiner Metal LatheSuperut 1500 DigitalTechnical data:Center height 250 mm, center width 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock cone MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output power 7.5 kW, max. diameter over face slide 300 mm, max. turning diameter i.d. bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, transverse feed 0.02 - 1.35 mm/revolution, metr. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 gears/inch, module thread module 0.5 - 3.5, thread diametrically pitch 56 - 8,

Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted

Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Technical Data: Motor: 400V,50Hz Reduce gear rate: 25:1 Wheel diameter: 380mm Blade size: 3160x27x0.9mm Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

AD planer Minimax 310, good condition, 2.2 kW, 200 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Scheppach HMC3200, built in 1993, good condition, 2.9 kW, 320 mn table width, 1380 mm table length, 150 kgPrices subject to change, errors, printing and typesetting errors excepted