sc used for sale

Key data: 520 mm, 1750 mm, 4 St.

Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Truss Type: TRV1-270-160-30 CE Clear width: 2,700 mm Agraffe: 5 HK (hooks) Max. load per pair of trusses 3,400 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery with us

tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Malzmühle Fa. Künzel Type 16/16 2 reels Malt hopper with scales Shotgun - 1.5 KW Built in 1994

Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3,000 /-40/+130 Temp. range: -40°C to +130°C Program controller: Stange SE - 502 Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of Make: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 More items - new and used - can be found in our shop! International shipping costs on request!

SCM F5L planer Working width 500mm 4kw main motor 4-knife shaft Traditional knives Main fence adjustable at an angle up to 45 Table top length 2600mm

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 110 x 40 mm Truss Type: TRV1-180-114-30 CE Agraffe: 5 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 3,500 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

for walking complete shafts, left and right

Several transformers for sale: Here a Schneider Electric 250KVA 10-0.4KV. Bj2016 mint condition Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

hydraulic die press, built around 1990

removes adhesive residues (sole edge)

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 11,500 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 72 pcs. Total number of pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 1,250 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P173 Profile dimensions: 100 x 75 x 2.00 mm System perforation: 50 / 50 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Hei ...

Note: The pictures are only used to illustrate the Material. The delivery volume differs from the depicted quantity. Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 20,400 mm Number of fields per row of shelves: 07 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 63 pcs. Total number of pallet spaces: 63 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 1,000 kg The scope of delivery includes: 08x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P173 Profile dimensions: 100 x 75 x 2.00 mm System pe ...

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570

Key data: 4 , 23 mm, 10 mm

Exhibition machine! Working width (mm): 23 - 180 Minimum workpiece length (mm): 300 Feed speed (r/min): 6 - 12 Engine: Feed: 0.7/1.1 kW (1/1.5 HP); Horizontal spindle (single): 7.5 kW (10 hp); Vertical spindles (single): 7.5 kW (10 hp) Speed (r/min): 6000 Spindle ø (mm): 35 Feed table length (mm): 1700 Working height (mm): 10 - 105 Suction nozzle ø (mm): 120

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Number of milling spindles: 1 Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Control Siemens ... Sinumerik 840 D Max.workpiece diameter ... 3200mm Turntable diameter ... 3000mm Max.table load... 14000kg Max. workpiece height ... 2200mm Axis Z ... 1155mm Max. workpiece weight ... 14000 kg Main engine power ... 81 kW Floor space... DXŠXV 7200x6400x6600mm The machine is in very good condition,

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

SCHULER HYDRAP SH 630 - 1.6 x 1.3 (2005) Total weight 74,000 kg Rated force 6,300 kN Max. stroke length 600 mm Mounting height 900 mm Closes quickly 500 mm/s Max. working speed 23 mm/s Min. working speed 51 mm/s Base and tool max. (xH) 2,280 x 1,200 mm Base and tool min. (xH) 1,250 x 600 mm Tool height min. 300 mm Total tool weight max. 2,500 kg Total tool weight max. 5,000 kg Permissible eccentric hydraulic press load left right Permissible eccentric load front rear 490 kNm 250 kNm Installed power 295 kW Rated current 565 A Voltage 400 V Frequency 50 Hz Operating hydraulic pressure 278 bar Total oil volume 5.185 l Oil type HLP 68 in accordance with DIN 51524

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 3620; Gross weight [kg]: 3620; Engine: DSC 9.49; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 35,000 L Dimensions: Ø 2.80 × 6.11 high Dimensions welded stainless steel plate/foundation plate: 3.04 m x 3.04 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Casing in machine 35 cm width Very good condition

Standing GRP tanks, polyester tanks from the company Staffelstein, with flat bottom with slope Volume: 100,000 L Dimensions: Ø 3.40 × 11.03 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 330 mm : 400 x 310 saw band length: 3820 x 34 x 1,1 mm band speed: 22 - 88 m/min table height: 930 mm total power requirement: 2,2 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise The data for this a ...

Vertical GRP tanks, polyester tanks with flat bottom with slope Volume: 50,000 L Dimensions: Ø 3.00 m × 7.25 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Vertical GRP tanks, polyester tanks with flat bottom with slope Volume: 50,000 L Dimensions: Ø 3.00 m × 7.25 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Compound system with 3 pcs. compressor Bitzer S6F-30.2Y with control box Wired for blast freezer or freezer. Displacement per compressor 101cbm/h Temperature range minus 40°C

Vertical GRP tanks, polyester tanks with flat bottom with slope very cheap to give away Volume: 26,500 L Dimensions: Ø 2.00 m × 9.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

Vertical GRP tanks, polyester tanks with flat bottom with slope very cheap to give away Volume: 26,500 L Dimensions: Ø 2.00 m × 9.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 850 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)

Hereby 12 pieces of very beautiful, upright Kaspar Schulz storage tanks with a capacity of 6,000 litres each are offered. The tanks have no damage whatsoever and are in mint condition according to their age. Specifications: - Make: Kaspar Schulz (high-quality tanks) - Equipment: with spray head and complete RLV fittings. - Year: 1989 - Capacity: 5.982 Ltr. -Ab. Operating overpressure: 0.9 bar -Ab. Operating temperature: 20 degrees. - Dimensions: Room height in which you stand: 3.80m, diameter: 1.65m If you are interested, please inquire.

balancing body min/max.: 0,1 - 1 kg balancing body diameter w/o machining unit: 300 mm balancing body diameter with machining unit: - total power requirement: 0,7 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 10,61,2 m No. 0304 Vertical balancing machine SCHENCK Z 35 E Working range: max. test piece 300 Control: Test piece weight 100 g - 1 kg Drive: .7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various metalworking machines are available. 1) Johannsen T8E belt grinder, year of manufacture: 1979, table dimensions X/Y: 1900mm/800mm, machine dimensions X/Y/Z: approx. 3200mm/1000mm/1250mm, weight: approx. 530kg. 2) Milling machine BFM 30, year of construction: 1981, machine dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm, weight: approx. 360kg. 3) Böhme router, machine dimensions X/Y/Z: approx. 800mm/900mm/1550mm, weight: approx. 320kg. 4) Fleckstein router, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. 5) Fleckstein horizontal milling machine, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. On-site inspection is possible.