sc used for sale

thickness of jaw: 200 mm weight of the machine ca.: 100 kg distance of clamping jaw max.: 420 mm dimensions of the machine ca.: 700 x 230 x 170 mm cm Note: without crank ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6

WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Key data: 5000 kN, 3845 g/PS, 120 mm

Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

Grain sampler type 1938 DRP 1 litre sampler, in a wooden box with drawer, Complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray Used, checked and adjusted by a specialist laboratory company, newly calibrated until 2028 Operating regulations and official boards are enclosed

Manufacturer: Schultheiss Type of Machine: Vacuum Casting Machine Year of Manufacture: 2017 Power Connection: - TN-C Network: 3x400V, 50Hz/PE - Power: 18 kVA - Current: 27.6A - Fuse: 3x35A Cooling Water: - Pressure: 3.5/8 bar - Temperature (min/max): 18°C/32°C - Flow Rate: 85 l/min Compressed Air: - Output: - Voltage: 300V - Frequency: 4 kHz - Power: 150 kA - Energy: 3200 kWs CE Marked: Yes Find more here - / Contact us at -

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: K The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Frame height: 2,000 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

sheet width - max.: 0650 mm coil weight: 2,00 t coil internal dia.: 420 - 520 mm coil external diameter: 1500 mm power requirement: 2,0 kW total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: 1,60 x 1,60 x 1,60 m decoiler is sold as is without commissioning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Color filling control for detection of under-mixing, size, position, fragments and overfilling • Adjustable illumination • Max. length x width of blister web 180 x 100 mm • Application: For tablets/oblongs/coated tablets/hard and soft gelatin capsules • Inspection for: Color/presence/size/shape/circumference/location/broken pieces/overfill • 21 CFR Part 11 compliant. • Touch panel

Max. saw length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via Diamond control of length and angles Swivelling of the angles inwards and outwards possible (20-135°) Moving roller conveyor Soundproof booth Minimum quantity spraying device Chip conveyor belt Weight: approx. 2,800 kg

Compartment width: . mm height: 4100 mm weight max. in kg: . kg depth: mm levels: 4 Elements: 5 The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling here a combi steamer from the manufacturer Rational, type SCC 201 in a very good used and functional condition. The device runs on 400 volts, 37 kW, built in 2005, tray trolley with 20 x 1/1 GN, for cooking, frying, regenerating and much more, core temperature sensor, programmable, workshop tested, immediately ready for use, dimensions W/D/H 90/80/180 cm, others on request.

Compartment width: 3700 mm height: 4000 mm weight max. in kg: . kg depth: mm levels: 4 Elements: The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compartment width: 3700 mm height: 4000 mm weight max. in kg: . kg depth: mm levels: 4 Elements: The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compartment width: 2700 mm height: 1550 mm weight max. in kg: . kg depth: 1050 mm levels: 3 Elements: 3 The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Acoustic hoods für IMA edge banding machines in various versions and dimensions available from stock Modifications / new lacquering available for a surcharge.

mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

propulsion: motor with brake, velocity is adjustable due to the possibility to change the gear wheel description: Type of transport chains: 4 chains, able to handle half pallets; pitch 355mm Remarks: as in an usual crate onveyor a stopper with an air cylinder is used; the pallets go against the stopper and are centered by this into their short side direction, after that the stopper goes back and the pallets continue to move on; able to handle half pallets availability: immediatelly Usable width: 1090 mm Installation dimension: 1500 x 1400 x 600 mm weight (m) [kg]: 200 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does  ...

Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

Cross-cut saw BERG & SCHMIDT Junior 275 - used-underframe, driving device ---------- Technical data ---------- cutting height: 60 mm, voltage: 230 V

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

volumn: . diameter: . mm tube connection: . 0 Dimension: 500x315x200 0 20 pieces The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibratory trough, type FRU 10/2-0-ER, built in 2011 Magnetic vibrator, type ER 42, built in 2011 - Swing width: 1.5 mm - Connected load: 230 V, 50 Hz, 2.5 A Condition: well-maintained, fully functional Availability: immediately

Slicing device for biscuits Cutting - Leo with inlet shaft Tabletop device made of stainless steel Output up to approx. 2000 rolls Adjustable cutting height for cut-through pastries Baked goods max. 160 x 80 mm, WxH DGUV V3 tested Connection 230V, ready to plug in Dimensions (WxDxH) in mm: 800 x 440 x 470 New device 12 Months Warranty + Spare Parts Service optional: Driving table for LEO Service Package E-Box Maintenance contract Instruction & Commissioning We have many TOP bakery machines in stock for you!

The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

6 spindles Tapping Cross drilling Thread Rollers Milling apparatus a lot of accessories Feed motor (spindles) defective! with bar feeder IEMCA PRA 40/32 P

Used mitre punch with support right extended

Manufacturer: Schiele, Type: Vaccumat Master, Year: 2002, Control: Siemens S 7, Spraying heads - total: 2, Lackheizung: yes, Unterdrucküberwachungt: yes, Lackrückführungt: yes, Year :2002

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

Manufacturer: Homag, Type: Schnellwechselköpfe FK 11 / FK 13, FREE TEXT: Preis je Stck,

Manufacturer: Schwerlastrollen, Driven: no, Working widht mm: 950, Width total mm: 990, Total hight mm: 140, Adjustable: no, Roller pitch mm: 220, roller diameter: 110, 1 Stückzahl : 1, 1 Stücklängen mm: 3700, 2 Stückzahl : 2, 2 Stücklängen mm: 1200, 3 Stückzahl : 1, 3 Stücklängen mm: 700,

Manufacturer: unbekannt, Type: Scherenbühne, Year: ca.1990, FREETEXT1: Hubhöhe Oberkante Platte 1000 mm, FREETEXT2: Plattenformat 1350 X 800 mm, FREETEXT3: Hydraulikeinheit verbaut im Tisch, Year :ca.1990

Manufacturer: Schlichter, Type: SCW 14065, Year: 2011, Control: hand, Cycles approx.: 5-8, Schweissrahmenabmessung mm: 1400 X 650, Shrinking tunnel mm: 1400, Outlet conveyor mm: yes, Electrical power shrinking tunnel kW: 18, Heating: elektrisch, Through running hight mm: 350, Working width mm: 800, Folienkern: 900, Folienstärke mu: 8,5-60, Transportsytem: Band, Wight approx. kg: 1000, machine ready for demonstration: yes, Year :12/2011

Manufacturer: Schleicher Promodul UNG 230 mit<CRLF>11 Stück Access Modulen 1 Rack Access und XCX 700, Sale without warranty: 11 Stück Access Modulen , No right of return: 1 Rack Access , Installation height: XCX 700,

Manufacturer: Schleicher RACK Access UKE, Type: UKE, Model: Input Rack,

Manufacturer: Meinert, Type: ApstapelanlageMeinert P420-Y/Z-SCH, Year: 2005, Control: 3 Tec, Program: yes, Stacking device: yes, Work piece length max mm: 5200 X 1200, Work piece length min mm: 500 X 5200, Work piece width max mm: 1200, Stack height in mm: ca.1500, Number of stacks: 14, Stack upper edge mm: 1500, Workpiece weight/stack position in kg: ca.120, Start of stack in mm: Boden, Number of sucking lines: 2, Feeding speed max m/min: ca.60, Year :2005

Manufacturer: Handke Schweisstaubabsagung, Control: no, Filter system - positive pressure: yes, Volume flow rate m³/h: ca.1500, Number of filter filter gallerys: 1, Return air capable: yes, FREE TEXT: inkl. Auffangbehälter,

Manufacturer: Heesemann Bedienteil LSM 8, Type: Steuerung Schleifmaschine,

Manufacturer: SCM, Type: M 3, Year: 2001, Cutting widht mm: 300, Working hight mm: 120, Power engine kW: 44, Year :1993

Hersteller : Datalogic Scanner Scanner inkl., Free text 1: Komplett verkabelt mit Netzteil und Verteilerdose, Free text 2: ca.25 Meter kabel dran,

Manufacturer: Istel, Type: Korpussprese Nischen schränke, Year: 1992, Korpuspressen-Montagelinie: no, Work piece width min-max mm: 250-550, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 150-350, Working widht max mm: 550, Working width min min mm: 250, Hydraulical/pneumatical: Hydraulisch, Floors and sides: 10 Böden wählbar, Year :1992

Manufacturer: Schirmer S10 Steuerung Säge, was installed in machine: Schirmer Doppelsäge,

Manufacturer: Berg und Schmid Kappsäge, Type: Typ Junior, Number of saw motors: 1, kW output per motor: 0,55,