sc used for sale

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

Key data: 45 °, 3200 mm, 1500 mm

Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm

Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.

Key data: 45 °, 3200 mm, 1200 mm

Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable

Connected load 380V 6.6A 3kW Cutting height approx. 440mm Cutting width approx. 650 mm Band saw length 5110 mm Attack Suction 100 mm Machine table swivel with handwheel Foot brake

Disc mill with 2 counter-rotating shafts, in stainless steel, for herbs and similar products

table length: 3000 mm table width: 3000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 3 mm stations: . total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1500 mm Control: Siemens type: 880T Table load: 6000 kg cross rail - adjustment: 700 mm Max ram stroke: 1000 mm turning speeds: 400 U/min transmission ratio: 2 Feed: 3-8000 mm/min Tool changer: chip conveyor: total power requirement: 69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3800 mm y-travel: 2000 mm z-travel: 670 mm Control: Siemens type: 840 D sl surface area: 3000x1800 mm milling spindle: 120 KW turning speeds: 30.000 U/min tool holder: HSK 63 Tool changer: 124 Pos c-axis: angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . l bar: 24 bar total power requirement: 2,85 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2100 mm grinding width: 600 mm workpiece height: . mm magnetic plate size: 2000x600 mm total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of axles: 2 St. total wight: 32,5 t axis load in front: 9 t axis load in the back: 9 t tire equipment: 385/65R22,5 . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2400 mm y-travel: 1000 mm z-travel: 1250 mm Control: Siemens type: 840 C size of pallet: 1250x800 mm numbers of pallets: 4 : 360 ° turning speeds: 4-5800 U/min Table load: 3000 kg spindle taper ISO: 50 Tool changer: 161 Pos. chip conveyor: spindle diameter: 130 mm milling drive: 45 kW total power requirement: kW weight of the machine ca.: 39 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 1200 mm z-travel: 1000 mm Control: Siemens type: 880 M size of pallet: 800x1000 mm numbers of pallets: 2 : 360 ° turning speeds: 5300 U/min Table load: 3000 kg spindle taper ISO: 50 Tool changer: Pos. w-axis: 600 mm chip conveyor: spindle diameter: 125 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mm Control: Siemens 840C Tool changer: 100 Pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . l bar: 24 bar total power requirement: 2,85 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: 625 mm stroke: 150 mm table surface area: 580x450 mm ram surface: 580x340 mm hole in the table: Ø 150 mm table height: 850 mm tool hole in ram: Ø 45 mm column travel -side: 200x200 mm weight of the machine ca.: ca. 6,0 t dimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t distance between columns: 800 mm stroke: 100 mm dayligth: 450 mm table surface area: 750x750 mm weight of the machine ca.: 3 t dimensions of the machine ca.: 1500x1500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 440 mm stroke: 8-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 63 mm table surface area: 720x750 mm ram surface: 440x280 mm hole in the table: Ø 240 mm table height: 830 mm tool hole in ram: Ø 40 mm weight of the machine ca.: ca. 5,0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 275 mm stroke: 150 mm table surface area: 860x550 mm ram surface: 600x400 mm table height: 810 mm tool hole in ram: Ø 50 mm dayligth: max. 475 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 2000x2500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 900 mm stroke: 300 mm table surface area: 850x900 mm ram surface: 800x880 mm stroke: 300 mm table height: 1050 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Emulsion pump, coolant pump, cooling water pump SCHMALENBERGER Z 40-13 immersion depth: 55 cm Q= 12m3/h H= 12 m motor: 1.1 kW IP54 Dimensions: 84 x 30 x 34 cm

Lubrication Pump, Gear Pump Aggragat SAXONIA ASL 0.1 pn: 1.6 MPa Q: 0.1 l/min motor: 0.12 kW 220 / 380 V Dimensions: 270 x 130 x 160 mm

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 190 ET300 Item No.: 0T823X11 Material: PP Immersion Depth: 3 00 mm Pump base: Ø 360 mm Pump flange: Ø 420 mm motor: 2.2 kW 230 / 400V IP55 New !' Dimensions 610 x 420 x 420 mm

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 150 ET300 Item No.: 0T623X18 Material: PP Immersion Depth: 2 85 mm Pump base: Ø 280 mm Pump flange: Ø 325 mm motor: 0.75 kW 230 / 400V IP55 New !' Dimension 550 x 325 x 325 mm

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 170 ET300 Item No.: 0T723X21 Material: PP Immersion Depth: 2 95 mm Pump base: Ø 330 mm Pump flange: Ø 360 mm motor: 1.5 kW 230 / 400V IP55 New !' Dimension 620 x 360 x 360 mm

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 150 ET500 Item no.: 0T625X3R < -br />Material: PP Immersion depth: 490 mm Pump base: Ø 280 mm Pump flange: Ø 325 mm motor: 0.0.000 mm 75 kW 230 / 400V IP55 Dimension 750 x 325 x 325 mm

Automatic lubrication, central lubrication unit, gear pump unit with tank SAXONIA 6.3 l/1 - 0.25 A pn: 1.6 MPa tank capacity approx. 6.3 l motor: 60 W 220 / 380 V with approx. 2 m pressure hose and approx. 10 m connection cable ! used, tested ! Dimensions: 430 x 500 x 470 mm

Emulsion pump, submersible pump SCHMALNENBERGER ZHT 6 25-13 immersion depth: 430 mm pump base: 240 mm flange: 350 x 350 mm Q = 12 m3/h H = 100 m motor: 7, 5 kW 380 V used, tested ! Dimensions: 880 x 380 x 350 mm

Float switches, level switches, level monitors, level switches SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 220 x 110 x 90 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG 24 - 250 V 2 Switching Points Immersion Depth: 170 mm Flange Ø 60 mm Float: Brass Level Switch for Central Lubrication ! New !' Dimensions: 220 x 110 x 90 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 170 x 110 x 90 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New !' Dimensions: 170 x 110 x 90 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 260 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 310 x 70 x 50 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG Immersion Depth: 260 mm 2 Switching Points Flange Ø 50 mm Float: Plastic, Colour: White Level Switch for Central Lubrication ! New !' Dimensions: 310 x 70 x 50 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 260 mm 2 switching points flange Ø 50 mm float: brass level switch for central lubrication ! New !' Dimensions: 310 x 70 x 50 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 330 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 380 x 70 x 50 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG Immersion Depth: 330 mm 2 Switching Points Flange Ø 50 mm Float: Plastic, Colour: White Level Switch for Central Lubrication ! New !' Dimensions: 380 x 70 x 50 mm

For sale is a universal gripper from Schunk, T. Number: PGN-125-1 0371103, Subject to prior sale, changes and errors!