sc used for sale

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used complete SCHLATTER MG303 welding line for standard mesh. This line is suitable for the economic production of lightweight and medium standard mesh in medium batches. The line wires are drawn off by spools, The cross wires are straightened and cut to length. This allows the system to be quickly retooled to another mesh type.

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...

Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...

Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...

Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...

Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...

Schulz roller curve 90° roller curve conveyor 450-390 IR1220 RA1185 Make: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveyor speed: v = 0.35 m/s incl. lateral guides on both sides Roll type: G6/50 plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: Running direction: links/ rechts Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 1220 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,35 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie  ...

Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal  ...

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Key data: 38 KW, 2100 1/min

Scania DC13-313A AT engine completely overhauled only in exchange on request with starter, light nose + belt drive. Engine is completely overhauled ready for installation with 12 months warranty. Old engine must come back to us within 14 days without breakage, cracks and repairable.

We offer completely overhauled Scania DC09-74A (#6740881) AT-engine for Doosan dumpers on request with starter, alternator and belt drive in exchange ex works Zeven with 12 months warranty. Old engine must be free of breakage, cracks and repairable and returned to us free of charge within 14 days.

speed of feed:: 50 m/min feed:: 5 - 99.999,9 mm cuts max.:: 70 - 80 Schnitte/m cross-section width:: 40 mm cross-section heigth:: 40 mm Condition: NEW, Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999 Display digital - Cutting capacity approx.: 70 - 80 pieces/min at 100 mm l ...

Operating mode: fully automatic/inline or manual Belt Feeding/Insertion: Automatic Band width: 5 mm Output: approx. 36 p/min Option: With Parcel Press and Parcel Stopper Transport speed table belts: Infinitely adjustable Technical documentation: fully available Odometer reading: approx. 50,000 strapping

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...

1 Shaft Ripper with Hydraulic Pusher for Sale - Brand: SCOINER - Cutting Chamber: 1950x1850 mm - Rotor Length: 1950 mm - Rotor Diameter: 450 mm - Blade: 60x60 mm - Engine: 150 hp (110 kW) - Hydraulic unit: 15 hp (11 kW) - With electrical panel For more details or to make an enquiry, please contact us.

Stock Clearance Bread Cutting Machines

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 11,430 mm Number of fields per row of shelves: 06 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 120 pcs. Pallet spaces per field: 120 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of s ...

Schulz Roller Curve Conveyor with 90° Drive Manufacturer: Schulz Type: Roller Curve Conveyor Angle: 90° Roll width: 490 mm Nominal/external width (NB): 530 mm Inner radius (IR): 1100 mm Number of rolls: 22 pieces conical Rolls Ø conical: approx. 55 ... 80 mm Drive: SEW gear motor Conveying speed: 0.33 m/s 2 height-adjustable supports Total dimensions: approx. 1870 x 530 x 800 mm (LxWxH) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2050 mm total power requirement: 3 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2 x 1,5 m guillotine shears adjustable backgauge 600 mm good condition working range: 2050 x 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand NN Year of Make: Unused Dimensions LxWxH (mm) 4 big bags 1200 x 1200 x 2000 Weight (Kg) approx. 4474 large / 4386 net Made in China Comments New / Unused, models like mentioned on pictures Condition of sale Only as 1 lot

SPECIFICATIONS: Operating pressure: 12 bar Aerial view: 613 L/min Voltage: 380 volts

Alimentatore DC-DC

Key data: 1000 mm

with foldable X-frame Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness steel: 0.8 mm Sheet thickness aluminum: 1.0 mm Sheet thickness front: 0.5 mm Colour: blue Dimensions: 1240 x 692 x 1150 mm Machine weight: 38 kg without roller scissors Opening width: 45 mm Bending Angle: 150 degrees Machine number: TB 3482

Schneider Frequency Inverters

Condition: used, ready for use Year of manufacture: 1998 Control: Siemens 840 C Travel X/Y/Z: 2x600 or 1x1,800 / 425 / 400 mm Main spindle: SK40 / 7,500 rpm / 106 Nm / 14 kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 kg

3 models available i.e. 15 Pieces Power: 50 - 100 - 160 KVA Type AoCk

Technical details: - Milling spindle swivels and height adjustable! - Adjustment displays of the milling spindle analogue on the handwheel - Spindle can be swivelled from -10° to +45° - Diameter of milling spindle (assembled): 30 mm - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm (mechanical changeover) - Display of spindle speed via indicator lamps - Mechanical spindle lock - Spindle right-left rotation - Milling mandrel mount: MK55 - Machine table length: 1,140 mm (without extension) - Max. table width: 840 mm - Working depth (up to cutter shaft): 430 mm -Table height: approx. 830 mm - 2 x adjustable milling stops (height: 150 mm, length: 430 mm (plus wooden extension) - Max. diameter table opening: 230 mm (3 rings) - 2 x suction nozzles, diameter 120 mm per nozzle Engine data: - Two-stage speed - Manual star-delta circuit - Voltage: 380 V - Current ...

A water mixing and dosing device from the Scheurer company from 2022 will be offered. The device is used, but in very good condition. Technical data: Manufacturer: Johannes Scheurer GmbH Description: Water mixing and dosing device Series/ Model: CENTRALINA/ DOSAMIXA Year of Make: 2022 Volts: 230 Frequency: 50 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, ...

Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

Continuous flow device, with round belt spreader belts Working width 550mm with instantaneous water heater system Fondant station with splash device with melting tank approx. 200l with separate transfer pump (built in 2006) - Tested and cleaned immediately available

Offer 24299 Specifications: - Volume flow approx. 2170 m³/h. - Dust bags / chip bags up to 170 L - Connection socket 160 mm - Connector adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Required space W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg

This machine is a mixer, cutter and emulsifier enclosed in one housing The benefits are as follows - space-saving thanks to compact design, - grinding the product in the cutting bowl under the influence of vacuum with simultaneous stirring and cooking - stable end product with repeatable quality thanks to fully automatic process control, - possibility of direct and indirect heating and cooling, - the possibility of producing fine emulsions and paste-like masses, as well as products with fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Main Material: Stainless Steel Agitator tank: 2000 l

Panel Saw Scheer Type: PA 7004 Year of Make: 1999 Cutting length 4200 mm with automatic lift table loading with cutting optimization software Full formats 2800 x 4200 mm and half formats 2800 x 2070 mm were processed

We have stored an associated coolant system Knoll type VRF 450/2250 (built in 1997) at a freight forwarder, so it is not on the pictures. The machine is fully functional and is available immediately.

This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details.

thread dia.: 1/4 bis 3 / 75 mm threading length: ? mm thread pitch: ? mm turning speeds: 33 U/min total power requirement: 1 kW voltage: 230 V weight of the machine ca.: 0,074 t dimensions of the machine ca.: 1,20,81 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: - mm amount: 2 STK Year: unbekannt 0 Grinding discs- 2 pieces Type Spec. 9A 541 JB U76 Max. RPM 2.360 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.