sc used for sale

An unpacking and screening station Schkinke Anlagenbau for the 3D printer EOS P3 is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. Including build frame. An on-site inspection is possible.

TECOM BLOWN FILM EXTRUDER EXKN65, extruder with screw diam. 65 mm. (2013), Contrex gravimetric, 200 mm TP2 Tecom die, KRA25 double outlet ring, calibration basket, 1.200 mm pull off unit, 1.200 mm. double manual collection frame, electric cabinet (2013) with inverter, MISSING OF TOWER, availability: immediate, working width: 1.200 mm., conditions: good, type: film PE

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

Offer a stator winding machine Schümann. Winding speed: 50 / 63 / 100 / 125 turns/min Voltage 380V

Stationary screw compressor with refrigeration dryer on 500 l container Specifications: Pressure 10 bar Volume flow 2000 l/min Voltage 400 V Drive power 15 kW Beh.-Vol. 500 l Weight 499 kg Noise 65 dB(A) Air outlet 3/4"i Dimensions (WxDxH) 1960x740x1725 mm Hint: ! without TÜV approval, container papers are not available

General SKU261W362 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4002 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1435 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,4mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsonly the brush for the lower screen deck is present in the machine.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expec ...

General SKU204U026 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 58 F96E Mach.No.231616 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 Information Year of construction1995 With switchgearcheck (as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die. - there are 2 screw shafts present. - no screw segments present. - this extruder comes with brush screws. - the extruder comes with 4 extra housing segments. this extruder was part of a complete system. any associated machines are: Collin Calander Pharma 200x400 , sku: 204U929 Sol ...

General SKU359W975 LocationBarneveld MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3899 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck 9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwcheck K-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) Information Year of construction2010 With switchgearcheck Total height1,80 m CEcheck Floorspace3,65 x 1,15 m Weight1200 kg Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ us ...

General SKU261W365 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4005 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,710mm-0,400mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,600mm-0,400mm-0,315mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsthe spacer for the upper brush, is not present.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect  ...

General SKU251U351 LocationBarneveld MakeBlackmer TypeGPI C18 I CV Mach.No.566084 Pressure Working pressure1.5 Bar Main Features MaterialStainless steel Volume18000 Ltr. Motor5.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 18 m³/h With motor5,5 kW, 1450 rpm, (Ex) Eccentric Screw Pumps MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Mounted on framecheck Total height1 m CEcheck Floorspace1,7x0,5 m Weight350 kg ATEX compatiblecheck Extra SpecificationsSuitable for most sanitary applications, including food and beverage, pharmaceutical, and cosmetic processes, particularly those that require consistent non-pulsing flow and gentle fluid handling (low shear rate), such as:- In the food industry: flavor, sauce, chocolate, glucose.- In the beverage industry: yeast, concentrate, glucose, fruit juice, ...

General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU231U195 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 50 MCC Mach.No.64012350 Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter40 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hoppercheck (165x130 mm) Feeding with metering screwcheck (Werner&Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 Information Year of construction2000 With switchgearcheck Total height0,73 m CEcheck Floorspace2,1x0,2 m Weight± 7340 kg Extra ...

General SKU275T623 LocationBarneveld MakeK-Tron Coperion TypeK2-MV-T35 No.1400518/M-356290 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter804 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws Screw diameter35 mm Pitch12,5 mm Screw length240 mm With hoppercheck Capacity77 Ltr. Hopper sizesdia. 804x339,93 mm Inletdia. 804 mm Outletdia. 220 mm With motor0,55 kW 400 Volt Screw speedmax. 82 rpm With breaking/mixing shaftcheck Motor0,55 kW 400 Volt Information Year of construction2014 With switchgear(as is) Floorspace1,2x1,2 m CEcheck Total height2,6 m Weight500 kg Extra Specificationswith: twin screw feeder: coperion k-tron K-ML-KT20, 2014, (CE), with hopper: 7 Ltr., inlet: dia. 114,3 mm, outlet: 60,3 mm: with :weight scale: coperion k-tron K-SFS-24: Typ24/12, 2014, (CE) tw ...

General SKU442W1463 LocationBarneveld MakeDutch TecSource Typedoseer/mengschroef Mach.No.20030328 Main Features Motor0.55 KW Length2000 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Trough-typecheck Diameter300 mm Length2000 mm Shaft diameter100 mm Pitch130 mm With hoppercheck Inlet230x70 mm Outlet160x155 mm Motor0.55 kW, 230/400 volt Screw speed59 rpm Outlet height1180 mm With coverscheck Information Year of construction2004 Mounted on framecheck Mounted on wheelscheck With switchcheck CEcheck Floorspace2,5x1,0 m Total height1,8 m Weight430 kg Extra SpecificationsThis screw conveyor is equiped of spray nozzles along the length of the screw. on the product input side is an opening to let sprayed liquid flow out again.Horizontal screw conveyorsDutch TecSourceConveying  ...

General SKU316S537 LocationBarneveld MakeGericke Typeingredënten dosering Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter85 Pitch85 Shaft diameter21 Screw length600mm With hoppercheck InletDia: 250mm(2x), Dia: 100mm, 150x150mm OutletDia 145 and 100mm (3x) With motor0,55kW, 400Volt, 1400rpm Screw speed10,5-104 rpm Information Year of construction2010 Mounted on framecheck Floorspace2,3x2,1m Total height3,1m CEcheck Weight1000kg Extra Specificationsfitted with Gericke DBW-300 metering belt specifications: length: 1800mm width: 300mm this dosing unit includes 3 dosing screws: #1 Screw Dia: 85mm pitch: 85mm Length:600 with ribbon mixer:± 165mmx75, Length :250mm #2 screw Dia: 40mm pitch: 30mm length:600mm with rib ...

General SKU354T1373 LocationBarneveld MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information Total height1,7m Weight380kg CEcheck Floorspace1,7x0,65m Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

General SKU368W1091 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 30 W 9/2 Mach.No.219522 Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel Information Year of construction1985 With switchgearcheck Total height1,30 m Floorspace2,80x0,85 m Weight1100 kg Extra Specificationshomogenizing extruder with spareparts. Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU397W1236 LocationBarneveld MakeWeber TypeCE-03 Mach.No.CE 3061 Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h Information Year of construction1985 With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Total height1,50 m Floorspace1,70x0,90 m Weight700 kgDouble screw extrudersWeberExtruders > Double screw extrudersBrand > Weber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU340U844 LocationBarneveld MakeBerstorff / Brabender Typedoppelschneckenextruder DSE 25 Year of construction1994 Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingcheck weinreich- industriekühlung, 12kW, 1994 DC-motorcheck 6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 Information With switchgearcheck(as is) Floorspace2,6x0,9m CEcheck Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum me ...

General SKU231U215 LocationBarneveld MakeSchenck TypeMechaTron Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter60 mm Pitch52 mm Shaft diameter32 mm Screw length740 mm With hoppercheck Capacity380 Ltr. Hopper sizesdia. 845x940 mm InletDN150, DN200 OutletDN150 With motor0,75 kW 230/400 Volt Without controlcheck Screw speed1375 rpm With vibro motor0,37 kW 230/400 Volt Information Year of construction2007 Floorspace1,1x1,2 m Total height1,7 m Weight400 kgMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU231U214 LocationBarneveld MakeSchenck TypeMechaTron Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter60 mm Pitch52 mm Shaft diameter32 mm Screw length740 mm With hoppercheck Capacity380 Ltr. Hopper sizesdia. 845x940 mm InletDN150, DN200 OutletDN150 With motor0,75 kW 230/400 Volt Without controlcheck Screw speed1375 rpm With vibro motor0,37 kW 230/400 Volt Information Year of construction2007 Floorspace1,1x1,2 m Total height1,7 m Weight400 kgMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKUR0081 LocationBarneveld MakeV.K.I. Schiedam bv (NL) Type3V SSHE Micro Votator / Schröder Kombinator No.V0910-94353-10A19191 Year of construction1995 Main Features MaterialStainless steel Motor7.5 KW Surface0.22 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerMicro Votator Number of stages:1 steam heated, 1 freon r-404a cooled, 1 water cooled/heated Heating surface0,246 (scraped surface) Heating surface shell0,229 m2 Capacity50 - 150 Kg/h Cylinder sizes(3x) dia.157mm x 500mm Max. temperature140 degr.C With jacketcheck Inletdia.30mm Outletdia.30mm Motor7,5 KW, 380/660 Volt Speed50- 500 rpm Information Mounted on framecheck With switchcheck With switchgearcheck Weight1500 KG CEcheck Floorspace1,9x1,4 M Total height2,5 M Extra SpecificationsWith Bitzer Kühlmaschinenbau GmbH Reciprocati ...

General SKUR1413 LocationBarneveld MakeFrewitt TypeProFi-Dos, ProFi-Sword No.5921810812 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter300 mm Specified Features - Metering screw With hoppercheck Capacity195 Ltr. Hopper sizesdia. 600x1200 mm Inletdia. 300 mm Outletdia. 150 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Metering screws MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information Year of construction2007 Floorspace0,9x1 m CEcheck Total height2,1 m Weight250 kg Extra SpecificationsSurface quality: Ra≤0.8 μm The ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation. : Metering screwsFrewitt FribourgDosing units > Metering screwsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKUR1412 LocationBarneveld MakeFrewitt TypeProFi-Dos, ProFi-Sword No.5921810811 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter260 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws With hoppercheck Capacity120 Ltr. Hopper sizesdia. 600x800 mm Inletdia. 260 mm Outletdia. 300 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Information Year of construction2007 Floorspace0,9x1 m CEcheck Weight250 kg Extra SpecificationsSurface quality: Ra≤0.8 μm The ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation. : Metering screwsFrewitt FribourgDosing units > Metering screwsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

General SKU354T1034 LocationBarneveld MakeKtron TypeS-400 No.240-739 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter370 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Metering screws Metering screwcheck Screw diameter42mm Pitch31mm Screw length700 With hoppercheck Hopper sizes370x370x370 Inlet370x370mm Outlet44mm With motorcheck With DC motorcheck 0,55kW, 180Volt, 1800rpm With breaking/mixing shaftcheck Motorcheck 0,37kW, 220/380Volt, 1390rpm Information Year of constructionunknown Mounted on framecheck With switchgearcheck(as is) Floorspace1,15x0,65m Total height1,8m Weight200kg Extra Specificationsktron features additional transport/mixing screw. screw Dia: 77mm screw Dia: 50mm screw Length: 480mm screw Shaft Dia: 22mm product Exhaust: 80x80mm motor data: 1.1kW, 220/380Volt, 28 ...

General SKU412W1298 LocationBarneveld MakeHethon Type62 S ZR No.0951 Main Features MaterialStainless steel Motor0.25 KW Specified Features - Metering screw MaterialStainless steel 1.4552 Metering screws Metering screwcheck Screw diameter41 mm Pitch45 mm Screw length570 mm With hoppercheck Flex-wall hopper Capacity300 l Hopper sizes600 x 600 x 930 mm Inlet600 x 600 mm Outlet⌀ 41 mm With motorcheck (0.25kW, 220-240 V, 114-137 rpm) Screw speed9-11 rpm Information Year of construction1999 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1.20 x 0.6 m Total height1.27 m Weight200 Extra Specificationswith 2 extra screws: 1x 38 mm pitch, ⌀ 42 mm : 1x 53 mm pitch, :⌀ 59 mm PTFE hopper Metering screwsHethon FeederDosing units > Metering screwsBrand > Hethon Feeder What you can expect from Foeth: -- Machine is in working condition - ...

General SKU261W359 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.3998 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1440 rpm Sieve perforation0,710mm-0,600mm-0,600mm With brush cleaningcheck With extra sieve deckscheck 3x 0,315mm-0,160mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

General SKU204X025 LocationBarneveld MakeAarding / Entecon TypeAMC Aero Mechanical Conveyor” No.06007 C3 Year of constructionUnknown Main Features Motor2.2 KW Length5000 mm Inlet diameter75 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screwcheck Floveyor (1x) Diameter75 mm Length5000 mm Inlet200x200 mm OutletDia. 200 mm Motor2,2 kW, 400/690 volt, 1410 rpm Information Floorspace5,8x0,8 mVertical screw conveyorsAarding EnteconConveying systems > Vertical screw conveyorsBrand > Aarding Entecon What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU204U1453 LocationBarneveld MakeAzo Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter60 mm Screw length450 mm InletDN150 OutletDN70/100 With motor0,37, 230/380 volt, 1380 rpm Screw speed88 Information Year of constructionUnknown Floorspace1,10x0,30 m Total height0,25 mMetering screwsAZODosing units > Metering screwsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU269X297 LocationBarneveld MakeKillion TypeKL-075 No.19707 Year of construction1995 Main Features Motor1.1 KW Inlet diameter35 mm L/D26 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter19,1 L/D26 Number of heating zones:3 Electric heating18,4 KVA, 380 volt, DC-motor1,1 kW, 380 volt Screw speed12-120 rpm InletDia. 35 mm Feeding with hoppercheck Number of temperature controllers:3 MaterialStainless steel Information Mounted on frameOn wheels With switchgearcheck Total height1,50 m Weight300 kg CEcheck Floorspace1,10x0,90 m Extra Specificationsextruder comes with: Thermo Prism TSE systems nr: 5265. year: 2002 Single screw extrudersKillionExtruders > Single screw extrudersBrand > Killion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU340X777 LocationBarneveld MakeSchenck TypeGRMD11 089 045 0210 No.V027515 A01 Main Features MaterialStainless steel Motor0.61 KW Inlet diameter210 mm Specified Features - Metering screw Metering screwcheck Screw diameter100 mm Pitch40 Screw length600 mm With hoppercheck Capacity± 300l Hopper sizesDia. 850x630 mm InletDia. 210/170 mm OutletDia. 160 mm With motor0,61 kW, 400 volt, 1425 rpm, (Ex) Screw speed275 rpm With breaking/mixing shaftcheck Motor0,37 kW, 230/400 v, 1370 rpm (Ex) Metering screws MaterialStainless steel 1.4401 (316), Stainless steel 1.4408 Information Year of construction2006 Mounted on framecheck Floorspace1,20x1,00 m Total height1,70 m Weight220 kg ATEX compatiblecheck Extra SpecificationsWith anchor agitator. motor: 0,37 kW, 220-240/380-420 volt, 1370 rpm (Ex) stirrer speed 9,1 rpm Load cell, type PWS, cap. 150 kg. (as is) ...

General SKU381X955 LocationBarneveld MakeK-Tron TypeK-T-80 No.0708592 Main Features MaterialStainless steel Motor2 KW Inlet diameter300 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck (Twin-Screw Feeder) Screw diameter80 mm Pitch50 mm Shaft diameter40 mm Screw length700 mm With hoppercheck (± 460 Ltr.) Hopper sizesø 1000 x 1650 mm (500 mm CON) Inlet180 mm Outlet180 mm With DC motorcheck 2kW Information Floorspace1,6 x 0,55 m Total height2 m Weight150 kgMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

Gyratory Vibrating Screen . Deck L x W: 3.000 x 2.000mm. 4 Decks. With 3KW SEW E.Motor and Unused spare-outlet

General SKU231U200 LocationBarneveld MakeBrabender TypeAUSTAUSCHEINHEIT No.05023296434 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter40 mm Pitch25 mm Shaft diameter8 mm Screw length500 mm With hoppercheck Capacity± 50 Ltr. Hopper sizesa: 235 mm, b: 323, h: 385, H: 470 mm Inletdia. 200 mm Outlet55 mm (2x) With motor0,37 kW 220-240/380-415 Volt Screw speedmax. 168 rpm Hopper with flexible wallcheck Information Year of construction2005 Floorspace0,6x1 m CEcheck Total height0,95 m Weight80 kgMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...

General SKU412X1248 LocationBarneveld MakeSchenck TypeC500-50-G No.V093649.A01 Main Features MaterialStainless steel Motor0.25 KW Inlet diameter450 mm Specified Features - Metering screw Metering screwcheck Screw diameterwithout screw With hopper300 x 300 x 450 Hopper sizes300 x 300 x 450 mm Outletø 19 mm With motor0,25 kW Without motor0:25 kw Screw speed91 rpm With vibro motorcheck (flexible wall) Hopper with flexible wallcheck Information Year of construction2015 Floorspace0,8 x 0,9 m Total height1,35 m Weight150 kgMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU412X1249 LocationBarneveld MakeSchenck TypeC3000-150-G No.V093650.A01 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter110 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter50 mm Pitch47 mm Screw length700 mm With hoppercheck Hopper sizesø 400 x 500 mm Inletø 110 mm Outlet60 mm Screw speed69 rpm Motor0,37 kW (Ex) With vibro motorcheck (flexible wall) Hopper with flexible wallcheck Information Year of construction2015 Floorspace1,2 x 1,1 m CEcheck Total height1,5 m Weight230 kg ATEX compatiblecheckMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKU231U203 MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Year of construction1994 Main Features Motor52 KW Inlet diameter49.7 mm L/D40 Specified Features - Double screw extruder MaterialNitriding Steel 1.8550 Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D40 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm Information LocationBarneveld Sizes switchgearcheck(as is) Floorspace4,26x0,80 m Total height1,9 m Weight2000 CEcheck Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 m Gleichlauf GL Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- M ...

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder MaterialStainless steel Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck Information TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones, gear speed 2200 rpm / I=20 rpm, Resotec control, extrusion pack Double screw extrudersLeistritzExtruders  ...

General SKU340X780 MakeK-Tron TypeK2m-T35 No.11240198/800890 Year of constructionunknown Main Features MaterialStainless steel Motor0.45 KW Inlet diameter220 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter35 mm Pitch50 mm Shaft diameter15 mm Screw length250 mm InletDia. 220 mm OutletDia. 110 mm With DC motor0,45kW, 200V, 2000RPM Without controlcheck Screw speed120-600rpm With breaking/mixing shaftcheck Information LocationBarneveld Floorspace0,85x0,45 m Total height0,4 m Weight50 kg CEcheckMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The  ...

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic

General SKU359W976 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder MaterialStainless steel 2.4819 (Hastelloy C-276) Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Information LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with: -2x k-tron feeders. - control cabinet. - 3x temperature control units. - extruder barrel lift - spare parts Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condit ...

General SKU261W363 LocationBarneveld CEcheck MakeAllgaier TypeTSM 2000/DS/1 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,710mm-0,400mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.4006 Year of construction1997 Mounted on mild steel framecheck Floor space2,00x2,00 m Total height2,00 m Weight1080 kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

General SKU381X957 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter2x 35 mm Pitch10 mm Shaft diameter40 mm Screw length400 mm With hoppercheck Capacity± 50 l. Hopper sizesø 200/400x880 mm Inletø 150 mm Outletø 100 mm With DC motorcheck 0,45 kW, 200 volt, 2000 rpm, With breaking/mixing shaftcheck Information TypeK-ML-KT35 Atex No.310358/MO-73640 Floorspace1,10 x 0,70 m Total height1,30 m Extra SpecificationsWith LWF D5 platform scaleMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU252X212 LocationBarneveld CEcheck Sizes Screw diameter15.6 mm Main Features Motor1.25 KW Inlet diameter30 mm L/D25 Specified Features - Double screw extruder Double screw extrudercheck Number of hours2070 Screw diameter15 mm L/D25:1 Co-rotatingcheck Number of heating zones:2 Electric heatingcheck DC-motor1,25 kW, 220/400 volt With variable speed drivecheck Screw speed500 rpm Feeding with hoppercheck Feeding with metering screwcheck vibro Number of temperature controllers:2 MaterialNickel alloy (201) 2.4068, Stainless steel 1.4552 Information MakePrism Mach.No.1464 Year of construction1995 With switchgearcheck Floorspace1,50x0,60 m Total height1,65 m Extra SpecificationsWith input vibration feeder, : output trough double rolls on mobile table, With Chiller plate. Double screw extrudersPrism EngineeringExtruders > Double screw extrudersBrand > P ...

General SKU244X191 MakeKöllemann TypeDT KSF 2XDN300 5500 lg No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialMild steel Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm Information LocationBarneveld Floorspace8,0x1,10 m Total height2,0 m Weight2800kg CEcheck Extra Specificationsthe screw is coolableHorizontal screw conveyorsKollemanConveying systems > Horizontal sc ...

General SKU212X067 MakeMinox TypeMTS 2000/2 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface2.5 m2 Sizes diameter1800 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,5m² Number of sieve decks:2 (1,5mm-1,2mm) Sieve sizesDia. 1800 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive excentercheck Motor2,2 kW, 220-240/380-420 volt, 1425 rpm With extra sieve deckscheck 3x ( 0,2mm-0,8mm-1,25mm) Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.9518 Year of construction1997 Mounted on mild steel framecheck Floor space2,40x2,40 m Total height1,90 m Weight1200kgTumbler screening machinesMinoxSieves > Tumbler screening machinesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears

General SKU326X672 MakeMinox TypeMTS-2000/3 No.9975 Year of construction2007 overhauled 2017 LocationBarneveld Main Features MaterialStainless steel Surface11.34 m2 Sizes diameter1900 mm Specified Features - Tumbler screener MaterialStainless steel 1.4301 (304) Tumbler screening machines Vibro sievecheck Sieve surface11,34 m2 Number of sieve decks:3 Sieve sizesDia. 1900 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive vibro motorcheck Motor0,4 kW, 400/690 volt, 1450 rpm Sieve perforation0,315 mm With ball cleaningcheck With extra sieve decks12x: 2x ball decks, 1x 0,12/1x0,16/2x 0,2/ 2x 0,3/0,315/0,5/0,56/1,0 mm, Information Mounted on mild steel framecheck Floor space2,2x2,2 m Total height1,70 m CEcheckTumbler screening machinesMinoxSieves > Tumbler screening machinesBrand > Minox What you can expect from Foeth: -- Machine is in working condition ...