sc used for sale

Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 457 Height: 260

A Köhler universal cutting table for the food industry is available. Machine dimensions X/Y/Z: approx. 900mm/900mm/1200mm. An on-site inspection is possible.

Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 244 Height: 260

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200

grinding wheel diameter: 300 mm table length: 0 mm table width: mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 129 Height: 260

material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm table length: 0 mm table width: 0 mm total power requirement: 1,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 5 mm plate thickness: 1000 mm distance between columns: mm total power requirement: 4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used plastic rolls for flow rack - roller strip - picking rack - 100 pieces - white Properties: - Rollers compatible with many manufacturers of flow racks - Spare rolls in a practical bag - Rollers are mounted in the click system - Manufacturer: SSI Schaefer - Colour: white - Used, in very good condition - Rolls made of robust polypropylene (PP) - Rollers with stable plastic axle/sometimes also steel axles Metrics: - Roll width: 25 mm - Roller diameter: 26 mm - Axle width: 34 mm - Axle diameter: 4 mm Scope of delivery: - 100 pieces of rolls (without mounting profile) All information without guarantee. Properties: Quantity: 100pcs. Roll width: 25mm Roller diameter: 26mm Axle width: 34mm Axle diameter: 4mm

Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz : 100-240 V Shipping possible. Additional images available upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 600m conveyor system, packing line, SSI Schaefer, – used - Ex-site price (net): only 99.500.-€, dismantled, packed and loaded! Manufacturer: SSI Schaefer Year of manufacture: 2018 Type: Conveyor system Many short sections / elements Roll width mainly 70cm, element width approx. 78cm Motorized roller conveyor Belt Pusher Belt Conveyors / Belt Conveyors Incl. curved belt conveyor from Transnorm Curve/Wedge Merge (Roller Conveyor Curves) Tapered roller curve Roller Switch Accumulation roller conveyor Folding Elements / Passageways Etc. Ground floor, 6 roller conveyor belts from incoming and outgoing goods with conveyor belt drive - 1st floor, five roller conveyor belts to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyor belts for the removal of 80 workstations with conveyor belt drive - 1st floor, waste cardboard belt f ...

Electrical Transformer Brand JEUMONT SCHNEIDER Power 36,000KVA High voltage 89.5 KV Low voltage 125 KVA ODAF Cooling Mode Year 1997 HTBT HS Traverse

Max. size= 52 x 36 cm, Availability= 062024, Envelope feeder Compatible with all small size printing machines - No mechanical changes to the printing machine necessary. No synchronization setting necessary. Absolutely shortest setup time. Efficient use from 1000 envelopes. Extremely simple operation. Technical data Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Electrical: 220 V, 50 Hz, 1,3 A LOT Loaded in truck or container

turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 tool taper: Ø 18 mm weight: 8,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3 - 50 mm drilling length: 500 mm lip angle: 90 - 140 ° voltage: 380 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 0,80 x 0,60 x 1,30 m Serial-No.: 76658 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crawler multirip saw SCM M3 Track width 300mm Cutting height max 120mm Main motor power 25kw Feed speed adjustable on the variator 6-45m/min Disc diameter max/min 350/200mm Minimum element length 600mm 3 rows of anti-recoil pawls Spindle diameter 50mm Sleeve diameter 70mm Central Track Lubrication Extraction spigot 200mm Machine weight 1660kg Machine dimensions 170x150x150cmH Net price

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GE Oil & Gas Nuovo Pignone Steam Turbine – Model SC1-10 For sale: Industrial Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SC1-10 (Equipment Tag: 661-KT-4101). This equipment is decommissioned and ready for transport. Ideal for power generation or as a mechanical drive for heavy-duty industrial compressors in refining, petrochemical, or power plants. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Steam Turbine Model: SC1-10 Equipment Tag: 661-KT-4101 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

A hydraulic lifting table Schmidler with a clamping unit for the woodworking industry is available. Machine dimensions X/Y/Z: approx. 12000mm/2550mm/3400mm. Documentation available. An on-site inspection is possible.

Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall d ...

Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details.

Key data: 243 KW, 2200 1/min

We offer completely overhauled Scania DC/DI12-54/56A industrial engines in exchange. These engines have been certified by the Scania Service Partner overhauled with test bench certificate.We sell all engines in exchange.We sell for a surcharge even without returning old parts from the factory zeven/Germany. If you have any questions, please contact: MIW GmbH Engine Repair Plant Nord-West-Ring 8 27404 Zeven Geramny Phone:0049(0) 4281-950583 Mail: infoatmiw-zeven.de

I am happy to offer for immediately: SCM - Moulder with 9 spindles and SCM Control 100 PC control of all spindles SCM Model Topset XL 323 Offer type: Used machine Availability: immediately Location: in the warehouse General condition: cleaned, maintained, function tested, partially repainted Year of Make: 2005 Max. working width 240 mm Min. working width 25 mm Max. working height 120 mm Min. working height 10 mm Minimum length 640 mm Feed speed 6 - 36 m/min, variable Shaft speed 6000/ 8300 rpm Shaft diameter 40 mm Vertical shaft useful length 140 mm Useful length horizontal shafts 250 mm Axial adjustment of vertical shafts with respect to work table 0 - 80 mm Axial adjustment of the horizontal shafts in relation to the right guide 0 - 45 mm Min and max. DM of the profile tool 100 - 220 mm Min. and max. DM of the tool on the planing shaft 120 - 140 mm Profile ca ...

Thicknesser SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4-knife shaft with traditional knives Plough shaft speed 5000r.p.m 4kw main motor Extraction spigot fi120 Machine dimensions 800 x 1000 x 1080mmH Weight 410kg Net price

1 of un-used power supply, Schroff MPS Triple, type MPS 022, Vin 110-230 VAC (3 A), 50-60 Hz., Vout 5 V DC (23 A) / 12 VDC (3,5 A) / 12 VDC (2 A). Also known as KHKS/Kisters part numbers: 003192946 / X003192946 / K003192946

cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;