sc used for sale

Features: 0.90m extendable platform, fold-down handrails, semi-swing gate, removable platform console box, lanyard attachment points, fully proportional joystick steering With integrated thumb switch, proportional lift/lower speed control, joystick for lift and drive, load detection system, swinging doors for battery/electric compartments, automatic 20-amp battery charger, dual motor front-wheel drive and steering, automatic brakes on both wheels, emergency brake release, battery status indicator, hour meter, lubrication-free bushings for the scissor arms, maintenance support for the scissor arms, manual lowering function, horn, lashing eyes, forklift openings, Non-Marking full rubber 323 x 100 tires, working height 7.72 m, platform height – in raised position 5.72 m, folded height 2.02 m, platform handrail height 1.10 m, folded height (handrails folded) 1.59 m, platform dimensions (W  ...

Composite wire screens 60 x 180 cm Unused Risk of minor damage present Auction-ID: A1-40113-149

Features: 0.91m extendable platform, fold-down handrails, self-closing gate, removable platform console box, lanyard attachment points, fully proportional joystick control with integrated thumb switch, proportional lift/lower speed control, joystick for lifting and traveling, load detection system, two speed settings, direct electric drive on two wheels, 8 x 6V 370 A/hr deep cycle batteries, automatic traction control, automatic 20 amp battery charger, automatic rear wheel brakes, alarm and indicator light in case of tip-over, steel scissor guards, oscillating rear axle, lift/lashing eyes, lubrication-free scissor arm bushings, scissor maintenance support, Ground control selector, key lock, battery status indicator, hour meter, horn, manual lowering cable, Non-Marking tires, working height 14.19 m, platform height – raised 12.19 m, folded height 2.80 m, platform handrail height 1.10 m, ...

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Cextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam outl ...

General SKU292M351 MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Mounted on framecheck Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h MaterialStainless steel 1.4305 (303) Single screw extruders With variable speed drivecheck (noduliser) Information LocationBarneveld With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Single screw extrudersFeed additivesAnimal feedOther feedPowdered foodsWysstecExtruders > Single screw extrudersIndust ...

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, Digital scale -Type: LS 703 ML 1140 mm -Id.No.: 216 750 15 -Quantity: 1x length measuring device available -Dimensions: 1305/80/H45 mm -Weight: 2.5 kg

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, Digital scale -Type: LS 703 ML 520 mm -Id.No.: 216 750 08 -Quantity: 1x length measuring device available -Dimensions: 680/80/H45 mm -Weight: 1.7 kg

Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 2000 kg -Load cell: 4x Tedea-Huntleigh 500 kg -Dimensions: 1500/600/H80 mm -Weight: 80 kg

Ringer Master (compatible with Doka Framax) accessories, consisting of: 21 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000583 Auction-ID: A1-46973-414

Rux Super65 Scaffolding floors, used, consisting of: 1 piece of aluminium pavement plank 1.5m x 0.29m 1 piece steel floor 1.5m x 0.29m (Article number 04547) 1piece steel floor 2.0m x 0.29m (article number 04549) SO001383 Auction-ID: A1-46973-327

Ringer Master (compatible with Doka Framax) accessories, consisting of: 25 pieces Ringer Master Scaffolding Bracket 120, without posts, raw, ungalvanized Factory number: 708V11 SO000582 Auction-ID: A1-46973-413

Swivel Mandrel + Holder OD 105 Application For quick comparison measurement of bores during series inspection. Due to the looped sleeve with a small undersize, the mandrel is drilled into the hole. guided and centered. Execution - Measuring contacts and measuring needle made of carbide (wear-resistant) - Measuring mandrel from Ø 130 mm can be supplied as a cross sleeve or skid-cross sleeve - Standard version Advantage - Easy to use - Minimal measurement time - Maximum measurement reliability - Robust and reliable - Matched to the desired bore diameter + tolerance Auction-ID: A1-47017-72

approx. 250 pieces of scaffolding normal couplings (fixed couplings) SO000146 Auction-ID: A1-46973-307

incl. charger and transport case Auction-ID: A1-47009-75

Product Description - Mobile measuring arm with integrated laser scanner (3D coordinate measuring machine) - Manufacturer: FARO - Model: FARO Edge / Model 14000 - Serial number measuring arm: E06051429518 - Year of construction: 2014 Application: - 3D digitization and 3D modeling - Industrial metrology / quality assurance - Reverse engineering & CAD comparison Technical data: - Measuring range: approx. 1.8 – 2.0 m - Single-point accuracy: ± 0.05 mm - Volumetric accuracy: ± 0.065 mm - Scanning accuracy: approx. 0.08 mm - Combination of tactile measurement and laser scanning - Automatic stylus recognition - One-handed operation Scope of delivery (complete): - FARO measuring arm - FARO handheld laser scanner unit (removable) - Transport case with foam insert - Accessories in the case (as shown) - Additional feet / support elements (as shown) - Handheld scanner (integrated laser s ...

incl. charger and transport case Auction-ID: A1-47009-76

ETICS scaffolding anchor system from Layher, consisting of: 7 pcs ETICS anchor traverse 1000 8 ETICS anchor beams 800 53 ETICS anchor rod 480 (up to approx. 300mm insulation) 17 ETICS anchor rods 380 (up to approx. 200mm insulation) 60 pcs lock nut SW 36x30 for ETICS anchors SO001377 Auction-ID: A1-46973-324

Lot of 158 screws M30x100 each with 1 washer with chamfer and 1 nut, blank, used Strength class 10.9 (HV) Pitch 3.5mm Male Thread Screw 25.71mm Female Thread Nut 26.21mm Cross-sectional stress area 561mm² Wrench width 46mm Weight per unit 1.00kg Item price SO001301 Auction-ID: A1-46973-120

incl. charger and transport case Auction-ID: A1-47009-88

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 2 horizontal struts 180 Approx. 4 diagonal struts 180 Approx. 4 rolls Approx. 4 Tower Protect 180 platforms, 3 of which with hatch incl. pallet, pack size approx. 3000x1400x800 mm Auction-ID: A1-47009-45

32 pieces of railing posts for the Ringer Master scaffolding bracket 120, galvanized, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000587 Auction-ID: A1-46973-418

Consisting of: a.o. Approx. 4 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 1 solar frame Approx. 4 horizontal struts 180 Approx. 6 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 Tower Protect 180 platforms, 2 of them with hatch Pack size approx. 2900x2200x700 mm Auction-ID: A1-47009-44

21 pieces Ringer Master scaffolding brackets 120, galvanized, without railing posts Factory number 704V11 Compatible with Doka Framax Item price SO000584 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-415

Ringer Master (compatible with Doka Framax) accessories, consisting of: 9 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000585 Auction-ID: A1-46973-416

Consisting of: a.o. Approx. 3 mounting frames/ 7 rungs Approx. 1 solar frame Approx. 9 railing frames Protect 180 Approx. 4 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 platforms platforms, 2 of them with hatch Approx. 4 rolls Approx. 1 basic profile for material lift Approx. 2 profiles long Approx. 1 profile short Approx. 1 material lift box Approx. 1 bracket for material lift incl. SELF-MADE pallet rack, pack size approx. 3000x1620x1500 mm Auction-ID: A1-47009-30

ca 1100 Case Plug Ø 9mm, NEW PRODUCT For staking out vertical frames suitable for Plettac, Rux, Layher,... List number by manufacturer: BIE00805 SO001382 Auction-ID: A1-46973-326

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approximately 5 Railing Frames Protect 180 Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 4 Tower Protect 180 platforms, 3 of which with hatch incl. pallet, pack size approx. 2300x1400x1200 mm Auction-ID: A1-47009-51

incl. charger and transport case Auction-ID: A1-47009-103

approx. 200 pieces of scaffolding normal couplings (fixed couplings) SO000141 Auction-ID: A1-46973-306

Consisting of: a.o. Approx. 4 triangular booms type B Approx. 2 horizontal struts 180 Circa 4 Diagonal brace 180 Approx. 1 solar frame Approx. 1 beam for material lift solar incl. pallet, pack size approx. 3000x1300x1200 mm Auction-ID: A1-47009-52

Lot consisting of 104 pieces of steel scaffolding tubes Ø48.3mm Nominal length 150 (between 1.5 and 1.99m long) SO000105 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-301

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 4 Tower Protect 180 platforms, 3 of which with hatch Approx. 1 material lift box incl. pallet, pack size approx. 3000x1400x800 mm Auction-ID: A1-47009-46

Lot consisting of 156 pieces of steel scaffolding tubes Ø48.3mm Nominal length 100 (between 1.0 and 1.49m long) SO000111 Auction-ID: A1-46973-302

incl. charger and transport case Auction-ID: A1-47009-86

Schaffer Equipped with double working hydraulic circuit Hydraulic quick coupler Battery key Front / rear / arm - led work lamps Rear plug for trailer Rear tyres filled with glycol Well maintained ! Auction-ID: A3-43539-19216

incl. quiet speed colposcope Auction-ID: A7-47030-161

25 pieces of railing posts for the Ringer Master scaffolding bracket 120, ungalvanized, raw, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000586 Auction-ID: A1-46973-417

approx. 130 pieces of scaffolding normal couplings (fixed couplings) Item price so000140 Auction-ID: A1-46973-305

approx. 30 pieces Müba Bracket Scaffold Hook-in Shoes, Hook-in Pockets, galvanised SO001039 Auction-ID: A1-46973-318

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm Projection 90 mm Working height from up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mm Condition: never used / new (5)

Toggle hand presses HK 1700 stroke 60 mm with crank with working height fine adjustment Height of the stand 450 mm Without additional effort, even more pressure in production. Maximum pressure output shortly before the end of the stroke thanks to toggle technology. Particularly stable design of spindle head and stand Pressure 17.0 kN Stroke 60 mm Projection 105 mm Working height from up to 75 -180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x415 mm Condition: never used / new (5)

The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool incl. saw blade HSS 250x2,0x32mm, 128 T/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5)

Manufacturer: VEB Pressenwerk Morgenröthe Type: PSHZ 40 Name: Screw press / balancing press (manual) Description: Manually operated screw press (balancing press) in solid cast construction from industrial production. The press works purely mechanically via spindle and hand lever, without hydraulics or electrical components. Suitable for pressing, straightening, assembly and joining operations in the workshop, maintenance and manufacturing. Robust and durable construction from GDR production. Scope of delivery: – Screw press as shown – Press table / support – Press type: Screw press / balancing press – Operation: manual – Size: 40 – Press force: Size 40 (according to experience, corresponds to approx. 40 t press force) – Maximum installation height: 460 mm – Total weight: 1650 kg Dimensions: – Width: 1800 mm – Depth: 1800 mm – Height: 2350 mm Weight: 1650 kg

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps