sc used for sale

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-46416-204

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-46416-205

70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-46416-237

Brand: Scania Power : 400Kw/450KVA Engine: Scaina 8 cylinder diesel Year of construction :2006 RPM: 1500 rpm Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-46826-9

SCARA WAVE INCORPORATED robot, complete with controller and pendant, approximately 1,600 hours of production, serial number WRS40L3SS1NNW19210002 Auction-ID: A7-46810-12

Scania rigid with Renova interchangeable system: - Type: R340 - D-hollandia tail lift - Manual transmission - Highline cab - Spoiler set - 40 mm trailer coupling - Air horns - Light bar Auction-ID: A1-40252-22

Serial number 813020120188 / 813020120151, deviation 50 g in the weight range 0-20 kg, deviation 100 g in the weight range 20-300 kg Auction-ID: A7-46661-18

unused; Key lock ; 120L clean water tank; 120L holding tank; 6795 Auction-ID: A1-46416-299

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-46416-207

1x \"Friluair\" air dryer type ACT 30 included dimensions: 460x600x830mm. Auction-ID: A1-46553-115

Hitachi LCD Projection CP-WX4022WN Miscellaneous office supplies without pallet Auction-ID: A7-46410-36

SCARA WAVE INCORPORATED robot, complete with controller and pendant, approximately 1,600 hours of production, serial number WRS40L3SS1NNW19210027 Auction-ID: A7-46810-13

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12

Hitachi LCD Projection CP-WX4022WN Miscellaneous office supplies without pallet Auction-ID: A7-46410-35

Machine type: Screw Compressor (Total Air System) Manufacturer: Ingersoll Rand Model: R5.5ie Execution: Tank-mounted (integrated air receiver) Serial number: 15M-021033 Year: 2016 Working hours: n/a Power: 5.5 kW Voltage: 230 V / 50 Hz Frequency: 50 Hz Flow rate: approx. 0.64 m³/min (64 cfm) Max pressure: approx. 8–10 bar (typical for model) Refrigerant: R134a (integrated dryer) Noise level: < 70 dB(A) Control: Electronic control panel Cooling: Air-cooled Tank: Integrated compressed air receiver Dryer: Integrated refrigeration dryer Remarks: Compact total air system with integrated tank and dryer. Used condition, functional status not tested. Visible signs of normal industrial use. Own mass: approx. 250 kg Dimensions (LxWxH): approx. 1,500 x 700 x 1,400 mm Auction-ID: A7-45993-12

disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-46416-211

Machine type: Scrubber Dryer (Walk-behind) Manufacturer: Kärcher Model: BD 45/40 C Execution: Walk-behind floor scrubber with squeegee Serial number: n/a Year: n/a Working hours: n/a Working width: approx. 450 mm Suction width: approx. 850 mm Fresh water tank: approx. 40 L Dirty water tank: approx. 40 L Drive: Brush-assisted (manual traction) Brush type: Disc brush Power supply: Battery (battery condition unknown) Control: Integrated control panel with display Remarks: Compact industrial floor cleaning machine. Includes squeegee and brush system. Used condition with visible wear marks. Functionality not tested, battery status unknown. Own mass: approx. 120 kg Dimensions (LxWxH): approx. 1,200 x 550 x 1,000 mm Auction-ID: A7-45993-13

70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-46416-238

Make: J. Schneider Elektrotechnik GmbH Type: Industrial Transformer / Power Supply Unit Model: DLAB 50F Year: 1999 Serial number: 203937/1 Technical data: - Rated power: 34 kVA - Frequency: 50 Hz - Primary voltage: 360 / 380 / 400 V - Primary current: 87 / 83 / 78 A - Secondary voltage: 415 / 436 V / 200 V - Secondary current: 76 / 77 A / 156 A - Phase: 3-phase - Protection class: IP33 - Cooling: Air (AN) - Standard: VDE 0532 Equipment: - Integrated electrical cabinet with main switch - High leakage current transformer system - Industrial heavy-duty housing - Power connection cables included Application: - Power supply for industrial machinery - Suitable for CNC machines or heavy equipment Condition: Used Auction-ID: A7-45993-46

unused in box; with battery charger; with manual; maximum working time 5 hours; 175 rpm brush speed; 24 liters per second of suction power; 2000 m2 per hour theoretical area performance; suitable for floor slope up to 2 degrees; 250 liters reservoir capacity; maximum water temperature of 60 degrees Celsius; 3769 Auction-ID: A1-46416-240

- Oscillating screen with 3 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of chips used in the inner layer of chipboard, equipped with 10x10 mm - 2.20 - 0.36 - powder meshes. - Total installed power 15 KW. - 2 chip inlets with a diameter of 650 mm. - 3 + 3 sieve planes with a total sieving area of 78 m². - Chip outlets: 3 with a diameter of 650 mm and one with a diameter of 500 mm. - Longitudinal distance between supports 3730 mm. - Transverse distance between supports 3940 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and acc ...

suction power 500W; brush motor 500W; brush speed 175 rpm; tank capacity 50+50 ltr; 2000 m3/h; with battery charger; unused in box; 2423; Auction-ID: A1-46416-501

Sieve size: 950x1100x2800 mm, 1x size: 2000 x 1400 x 3200 mm, Auction-ID: A1-40138-286

3 stages, 380 V 50 Hz Connected load: 10.5 kVA Rated current: 16 A Auction-ID: A7-46802-50

Year 2024; Smart screwdrivers with PLC and rods+ head Auction-ID: A1-46617-35

Universal Scooter Manufacturer: Thuringia Model No.: DG-1 with mould changer with leather hard dryer Machine is ready for use. Very good condition. Few operating hours.

MultiControl GmbH x-ray scanner with infeed belt, type: FA3/M, serial number: ET240914, year of construction: December 2019, 230 V, 1 Ph, 50 Hz, 9 A, clearance: 580 mm x 300 mm, dimensions a-ray scanner: 2300 mm x 1000 mm x 2100 mm, dimensions infeed belt: 2300 mm x 800 mm x 1500 mm.

Platform Floor Scale Mettler Toledo ID7

Drive motor: 3600 Nominal speed Protection class: 55/23 Rating: 35 ISO class: F Oil tank volume: 46 L Cooling water pressure: 2 to 10 maximum bar Auction-ID: A1-46862-37

2 scrap bins with flap for forklifts, dimensions LxWxH 125x 81x 66cm each mounted on Euro pallet fixed with floor Auction-ID: A1-46862-151

Spruce scaffolding board 500x19.5x3 cm, see photos for details. Auction-ID: A1-45043-2351

Spruce scaffolding board 500x19.5x3 cm, see photos for details. Auction-ID: A1-45043-2352

Hardwood planed shelf screen design 28-plank 15mm, straight vertical, 180x180cm. Straight vertical with 2 visible sides. The screen consists of 25 planed vertical planks of 1.5 x 14 cm and 3 intermediate beams for strength. The screen has a height of 180 cm, a width of 180 cm and a thickness of 4.5 cm. Auction-ID: A1-45043-2317

Spruce scaffolding plank impregnated 500x19.5x3 cm, see photos for details Auction-ID: A1-45043-2355

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45043-2230

with 8 suction heads, individually adjustable, suitable for sheet metal up to 4000mm long and 1500mm wide Auction-ID: A1-46862-7

Spruce scaffolding board 500x19.5x3 cm, see photos for details. Auction-ID: A1-45043-2354

with replacement saw blades Auction-ID: A1-46862-31

FARO Model 21000 Measuring Arm - Portable 3D Measuring Device/Scanner For sale is a professional FARO measuring arm (portable coordinate measuring machine) model 21000. The system is suitable for precise 3D measurement tasks in quality assurance, toolmaking, manufacturing and reverse engineering. The FARO measuring arm enables fast and accurate tactile measurements directly on the component. Thanks to its mobile design, the device can be used flexibly in workshop and production environments. Note: The sale is without software. Technical data • Manufacturer: FARO • Model: 21000 • Part Number: 25000-225 • Revision: 3.0 • Serial number: W25-C5-18-16257 • Date of manufacture: 24/01/2018 • Last calibration: 08.06.2021 • Origin: Made in U.S.A. • Certifications: TÜV SÜD, CE, UL/CSA 61010-1 compliant Connections • Ethernet (RJ45) • USB � ...

Hardwood planed shelf screen design 28-plank 15mm, straight vertical, 180x180cm. Straight vertical with 2 visible sides. The screen consists of 25 planed vertical planks of 1.5 x 14 cm and 3 intermediate beams for strength. The screen has a height of 180 cm, a width of 180 cm and a thickness of 4.5 cm. Auction-ID: A1-45043-2318

Adjustable base plates in galvanised steel – approx 60-70 Various clips, straight and swivel couplers approx 250 Short scaffold tubes (600mm ish) Approx 150 Long tubes 20 feet approx 100. Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46452-9

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45043-2229

Fire Brigade SCBA Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-111

Spruce scaffolding board 500x19.5x3 cm, see photos for details. Auction-ID: A1-45043-2353

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45043-2231

Wet spent grain conveyor - Housing with rectangular inlet chute - Wet spent grain bunker mounted at the inlet - Flushing water discharge connection - Mounted gear motor - Non-return flap with air connection, pressure gauge and ball access hatch., Additional title: Wet spent grain conveyor, Capacity approx.: 200 kg/min, Power: 4 kW, Current: 6,98 A, Voltage: 400 V, Frequency: 50 Hz, Material: Stainless steel 1.4301, Features: Spent grain bunker; non-return valve with compressed air connection, manometer and ball access hatch

Excellent condition - Fully operational - Loading / Transport possible! Flow rate 3500 l/min. suction capacity 22 kW operating pressure 8 bar modelname / number ASD 37

Technical Specifications & Performance Data The New automatic screw capping machine 8 heads for 12000 BPH is a high-speed rotary capper engineered for modern beverage production and industrial packaging environments. Designed for both PET and glass containers, it delivers precise, repeatable torque at high throughput for a wide range of products including water, juice, beer, wine, soft drinks, and edible oil. Production speed: up to 12,000 bottles/hour (12000 bph) Capping heads: 8 spring-loaded heads with quick-release design (M32x1.5 connection) Neck finish: 28 mm compatibility (e.g., common PCO/BPF variants) Cap types: aluminum screw caps (e.g., 30×60 ROPP), Guala pressure closures; additional formats on request Cap handling: on-the-fly pick-and-place with release head for stable, accurate cap transfer Cap feeder: Ø600 honeycomb feeder for continuous, oriented cap supply Turret g ...

Impact drill - screwdriver - angle grinder - impact wrench - including 2 batteries and, battery charger - handles impact drill and angle grinder - safety cover angle grinder. This in 2 suitcases. Auction-ID: A1-40256-81

Large Schneider electrical cabinet with ventilation Please inspect Auction-ID: A1-46676-21