sc 43 used for sale

Automatic lubrication, lubrication pump SCA 0505.0031 tank approx. 2.5 l Motor : 0.09 kW 230 V IP 55 used, tested ! Dimensions: 340 x 270 x 200 mm

Machine number: 3-0419 Compressive force: 3 kN Stroke: 50 Table dimensions: approx. 150 x 110 mm

Consisting of 6 panels and 2 doors now U-shaped, Up to size 400 x 200 x 230cm

Hand Screw Press, Balance SPM YB-3 pressure max: 20.000 kg Width between column: 380 mm stroke: 200 mm greatest height: 320 mm Table bore: Ø 76 mm Balance diameter: Ø 1450 mm Table: 1120 x 1120 mm Dimensions: 1450 x 1450 x 2110 mm

Machine number: 219278 Operating voltage: 380 V Spindle passage: approx. 22 mm Spindle speed: 270-3000 rpm Centre length: approx. 350 mm Centre height above bed: 110 mm Turning diameter over bed: 220 mm Centre height over support: 70 mm Turning diameter over support: approx. 140 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuck including post collets and other suitable accessories Reference: Ulmer - Lot 16

Submersible pump, coolant pump, EVA POMPES VM 35 SCM immersion depth: 390 mm Q = 9 m3/h H = 15 m motor: 2,, 2 kW 220 / 380 V IP 55 connection: 1 1/2 inch Dimension: 700 x 280 x 360 mm

Automatic lubrication, lubrication pump SCA 0505.0031 tank approx. 2.5 l Motor : 0.09 kW 230 V IP 55 used, tested ! Dimensions: 270 x 200 x 410 mm

Mixed lot of Pepperl+Fuchs industrial identification and barcode scanning equipment. Includes 11x LS682-DA-EN/F1 laser scanners and 3x IDENTControl IC-KP-B6-2V15B PROFIBUS control modules with manuals. Specifications visible: 18–30 VDC / 20–30 VDC, Class 1M / Class 2 laser products, LAN and service interfaces. Made in Germany.

Automatic lubrication, lubrication pump SCA 0505.0031 tank approx. 2.5 l Motor : 0.09 kW 230 V IP 55 used, tested ! Dimensions: 270 x 200 x 410 mm

" (2x) Centering angle 300 mm – Precision marking angle Centering angle with 300 mm leg length for the exact determination of centers on round workpieces (e.g. shafts, tubes, discs). • Design: Centering angle • Length: 300 mm • Condition: new / unused • Accessories: protective bag • Marking: Centering angle 300 mm / 301-73 • Material: Metal, precisely manufactured • Application: Centering, scribing, testing "

Trapezoidal lead spindle DECKEL thread length: 405 mm thread: Ø 24 mm pitch: 4 mm Spare part for tiller DECKEL KF12 ! used ! Dimensions: 700 x 225 x 225 mm

Ball screw Steinmeyer Kd. No. 10964233-1 1500 mm Customer: Ex - Cell - O GmbH New ! with test report Dimensions: 1500 x 120 x 90 mm

Ball screw STEINMEYER 1516.36 / 15.50.1315.2085 2100 mm L51 / 450002184 11009.27472 New ! Dimensions: 2100 x 120 x 120 mm

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders.

Ball screw STEINMEYER 10908263 - 1 ( 10908263-1 ) 1750 mm ZZ 00195 - 43 New ! Dimensions: 1750 x 130 x 120 mm

Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool

Ball screw PAGUS 10903293 - 1 ( 10903293-1 ) 1750 mm ZSSR 1945 New ! Dimensions: 1750 x 130 x 120 mm

Saw blade 315mm Cutting diameter 105mm Motor 1.5KW Mitre 45°/60° Speed 17/35m/min See pictures

Ball screw STEINMEYER 10908313 - 1 ( 10908313-1 ) 1140 mm New ! Dimensions: 1140 x 110 x 90 mm

Tool cabinet with contents SK 40 Tool Holders, Tools and other accessories. See pictures

Sold without content Batch that is part of a combination of batches

Ball screw IBL W148651 1060 mm nut: approx. Ø 109 x 280 mm pitch approx. 20 mm 080-20-64-0755-157 SER. 84584 / 4 New ! Dimensions: 1060 x 160 x 150 mm

Ball screw BLIS Z-Nr. AD.0054.0237 1170 mm L-Nr. 6302415 SER. 84584 / 4 New ! Dimensions: 1170 x 120 x 120 mm

Ball screw A. MANNESMANN Ex-Cell-O GmbH 489783 790 mm 8927 New ! Dimensions: 790 x 120 x 90 mm

Ball screw WARNER ELECTRIC DANA Boehringer F441605101305700 830 mm 005.1117.1143.10 28714 New ! Dimensions: 830 x 80 x 90 mm

Ball screw STAR 1502-3-1085 610 mm AB10L 16 045 New ! Dimensions: 610 x 80 x 70 mm

Ball screw PAGUS S145372 1250 mm 95705 010 0606R5 A1 New ! Dimensions: 1250 x 100 x 90 mm

U-V Scanner Protection Controls P-CII WRA 491S Dimensions: 140 x 55 x 35 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

Load block thread with screw RUD 2 pcs. VLBG 0.63t M10 8500822 Load capacity: 0.63 t New ! Dimensions: (box) 220 x 100 x 100 mm

Pressure gauge set MANOMETERWERK KARL-MARX-STADT Pressure gauge 60 0 - 16 MPa (0 - 160 bar) Scale: 0 - 300 kN TGL 8701 Housing diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New !' Dimensions(Single Pressure Gauge): 71 x 71 x 65 mm

Screening machine PAGUS sieve Ø approx. 2.5 and 5 mm Screen box: 400 x 295 mm approx. 63 stroke per min motor: 0.37 kW 380 V used, tested ! Dimensions: 1200 x 750 x 550 mm

Multifunctional punch Schüko Nr. 396346 Year: 1996 Air pressure: 8 bar Air consumption: NI 18 l/min Dimensions: 700 x 300 x 1000 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm hole spacing: 60 / 51.5 mm 4x threaded hole: M8 x 1.25, depth: 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Scribing apparatus WMW D45 751.04.453 New ! Dimensions: 200 x 60 x 60 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Ball screw INA ZKLF 2068.2RS NA ( ZKLF2068.2RSNA ) 02/W6 ASP 14-20 ( 02/W6ASP14-20 ) thread length: 845 mm thread: Ø 32 mm pitch: 4 mm for AGIE CUT 300 used, tested ! Dimensions: 1200 x 210 x 125 mm

Hot Glue Gun SCA SCHUCKER AK 310-10/H/230V 7845.1000 D Heizung AK 400-450 230 V 0642.1003 New ! Dimensions: 230 x 100 x 130 mm

Screw block, machine foot, with lock nut AMF NO. 6430 Type 140 Height: 100 - 140 mm Load capacity: max. 60 kN New ! Dimensions 115 x 80 x 140 mm

Screw block, machine foot, with lock nut AMF NO. 6430 Type 200 Height: 140 - 200 mm Load capacity: max. 60 kN New ! Dimensions 115 x 80 x 140 mm

Screw support, fixator PAGUS 450 to 660 mm spindle: Ø 58 mm foot: 260 x 260 mm plate: 180 x 180 mm height max: 660 mm height min: 450 mm weight: 34 kg used, tested ! Dimensions: 260 x 260 x 450 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Scribing Plate, Spotting Plate, Straightening Plate PAGUS Work Surface: 290 x 285 mm Height: 45 mm Weight: 20 kg Dimensions: 290 x 285 x 45 mm

Welding table, straightening table, straightening pad, work table, clamping table marking plate, spotting plate, levelling plate PAGUS work surface: 490 x 400 mm height: 84 mm Dimensions: 490 x 400 x 84 mm

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - / Contact us at -

Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -