sc 43 used for sale

General SKU338T919 LocationBarneveld MakeSchrader Pressure Working pressure100 Bar Vacuum possiblecheck Working pressure vapour evaporator13 Bar Main Features Surface5 m2 Specified Features - Shell and tube heat exchanger Falling film evaporatorcheck Capacity46 Ltr. Heating surface5 m² Tube capacity46 Ltr. Number of tubes:26 Tube diameter25 mm Tube length2500 mm Shell capacity56 Ltr. Max. temperature140 °C Capacity50 kW Heat exchangers MaterialStainless steel 1.4571 (316Ti) Information Type3,2x Mach.No.2181 Year of construction1996Catalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic  ...

General SKU235K162 LocationBarneveld MakeAZO GmbH + Co. Osterburken TypeTrogschnecke TFS-315 G B A21 Main Features Motor2.2 KW Length2000 mm Inlet diameter315 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screw(1x) Trough-typecheck Diameter315mm Length2000mm Between inlet and outlet± 1450mm Shaft diameter90mm Pitch145/290mm Inletdia. 250mm Outlet2x dia. 300mm Motor2,2 KW, 230/400 Volt Screw speed± 76 Rpm With coverscheck Information Mach.No.408691 Year of construction2004 Floorspace2,9x0,5 M Total height0,6 M Weight260 KGCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorgan ...

General SKU212T536 LocationBarneveld CEcheck MakeAmmag Main Features Motor1.5 KW Length1400 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 Horizontal conveyor screwcheck Diameter187 mm Length1398,5 mm Shaft diameter106 mm Pitch103 mm InletDia. 200 mm OutletDia. 200 mm Motor1,5 kW 220-240/380-415 Volt (Ex) Screw speed96 rpm Outlet height388,9 mm Height between in- and outlet1130,1 mm Information TypeRDSCHN D187x1300x3,9° Mach.No.SR-1601 SG09 Year of construction2008 Floorspace1,1x0,5 m Total height0,65 m Weight230 kg ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBi ...

General SKU222M099 LocationBarneveld Main Features Motor4 KW Length2900 mm Inlet diameter340 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screws Horizontal conveyor screwConveying and metering screw (1x) Diameterscrew 1= dia. 340mm, screw 2= dia. 150mm Lengthscrew 1= 2900mm, screw 2= 1350mm Between inlet and outlet± 2200mm Inletdia. 210mm Outletdia. 320mm Motor4,0 KW, 220/380 Volt + 0,75 KW, 400 Volt Information Makeunknown (manufacturer tag is missing) Floorspace4,0x0,5 M Total height1,6 M Weight480 KGCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIVertical screw conveyorsPlastic & rubberMinerals & inorganicPlas ...

General SKU082B471 Makeunknown LocationBarneveld Main Features Motor2.2 KW Length2200 mm Inlet diameter250 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screw(1x) Diameter250mm Length2200mm Between inlet and outlet1900mm Shaft diameter75mm Pitch190mm Inletdia. 250mm Outletdia. 250mm Motor2,2 KW, 220/380 Volt With coverscheck Information Floorspace2,6x0,6 M Total height0,9 M Extra Specificationsinclined screw conveyor Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coffeeOi ...

General SKU239T284 LocationBarneveld CEcheck MakeGuttridge Main Features Motor5.5 KW Length4700 mm Inlet diameter400 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter460 mm Length4700 mm Between inlet and outlet3900 mm Shaft diameter150 mm Pitch325 mm Inletdia. 400 mm Outletdia. 300 mm Motor5,5 kW 400/690 Volt Screw speed89 rpm Outlet height1400 mm Height between in- and outlet1400 mm With coverscheck Information TypeScrew Conveyor Mach.No.580194-3-1 sc6.2 Year of construction2013 Mounted on wheelscheck Floorspace5,8x0,9 m Total height1,4 m Weight1600 kg Extra Specificationswith a rail system Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFo ...

General SKU239T285 LocationBarneveld CEcheck Main Features Motor18.5 KW Length6500 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter720 mm Length6500 mm Between inlet and outlet5850 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet530x420 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information MakeGuttridge Mach.No.0580194-1-1 Year of construction2013 Floorspace7,5x1,8 m Total height1,5 m Weight2800 kg Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBi ...

General SKUR0472 MakeTMT (CZ) LocationBarneveld CEcheck TypeSF625/2 Main Features Motor3 KW Length1632 mm Inlet diameter220 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screwcheck Tube-modelcheck Diameter190mm Length3026mm Between inlet and outlet1632mm Shaft diameter65mm Pitch150mm Inletdia. 220mm Outletdia. 211mm With adjustable packing glandscheck Motor3 kW 230/400 Volt (Ex) Screw speed87 rpm Information No.3807/02 Year of construction2011 Floorspace0,9x0,5 M Total height4,0 M Weight300 Kg ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIVertical screw conveyorsPlastic & ...

General SKU410S987 LocationBarneveld MakeNema Main Features Motor5.5 KW Length5125 mm Inlet diameter265 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Tube-typecheck Diameter250 mm Length5700 mm Between inlet and outlet5125 mm Shaft diameter140 mm Pitch240 mm InletDia. 265 mm OutletDia. 245 mm With adjustable packing glandscheck Motorcheck Screw speed76rpm With coverscheck Information TypeRS 0250 x 05700 - Kusae Mach.No.50.993-001 Year of construction1997 Floorspace6,7 x 0,9 m Total height0,8 m Weight1060 kg Extra SpecificationsThis conveyor screw is equipped with a new motor and reducer. Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharm ...

General SKU239T286 LocationBarneveld CEcheck Main Features Motor18.5 KW Length5000 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter700 mm Length5000 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet650x400 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information MakeGuttridge Mach.No.0580194-7-1 Year of construction2013 Floorspace7,3x1,7 m Total height1,40 m Weight3000 kg Extra SpecificationsSynatel level control, type digimatic, Schmersal sensors Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectioner ...

General SKU234M148 LocationBarneveld Makeunknown, typeplate is missing Main Features Motor3 KW Length5000 mm Inlet diameter400 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameterscrew 400mm Lengthscrew 3,4 M Motorscrew 4 KW 380 Volt, floveyor 3 KW 380 Volt Screw speed28 rpm Conveying height5,0 M MaterialStainless steel Information Typefloveyor With switchcheck Floorspace+/- 3,5x1,5x1,0 M Total height+/- 6,0 M Weight1400 KGCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIVertical screw conveyorsPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine  ...

ROTATING SCREEN, construction in Aisi304 stainless steel, previously working on a 160 mm extrusion line, stainless steel screen with 17 mm holes, 2 exits for lumps and good materials, 0,25 kw motor, Bonfiglioli gearbox, loading hopper 305 x 505 mm., excellent conditions, installed power - used power in work: about 60-65% : 0,25 kw, availability: immediate, conditions: excellent

table length: 4900 mm table width: 1300 mm table height: 980 mm weight of the machine ca.: 5,6 t dimensions: 5,0 x 1,3 x 0,6 m Welding / Straightening Table - Plate thickness: 80 mm - Plate thickness (incl. frame): 360 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2520 mm plate thickness: 2.5 mm bending angle max.: 135 ° stroke of upper beam: 250 mm adjustment: UW 80.0 mm back stop - adjustable: ca. 925 mm work height max.: ca. 935 mm total power requirement: 6.0 kW weight of the machine ca.: 2500 kg. dimensions of the machine ca.: 3600 x 1650 x 1425 mm good condition () with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRáDER NC control unit POS 800 with LCD display Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm a pointed rail is installed - Operating instructions The data for this ad was created  ...

: neu : 2024 : 5546 : prompt, Zwischenverkauf v : Polen : 1690 € : 1 : 150 mm : 2.000 x 150 mm : 200 x 150 x 42 ø mm : 605 mm : 3000 1/min : 3.5 kW : 1025 mm : 600 mm : 1000 mm : 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Round arch moulding machine from Schlebach in very good condition with infinitely variable speed adjustment, as well as left/right rotation. you will receive a proper invoice with VAT. Net price.

Key data: 3000 mm, 1 mm

Schechtl guillotine shears 3mx1.5mm with hand depth stop in top condition, price net.

Manufacturer: Schaublin Model: 180-CCN Year of Manufacture: 1997 Spindle Hours: 10,753 h Machining Capacities - Max. turning diameter over the bed (with revolver only): 330 mm - Max. turning diameter over the cross slide: 160 mm - Max. admissible diameter over the bed: 430 mm - Spindle centre height over cross slide: 83 mm - Max. distance between centres: 650 mm - Max. workpiece weight - with spindle A2-5: 25 kg - Max. workpiece weight - with spindle A2-6: 35 kg Spindle - Spindle nose ISO: A2-5 or A2-6 - Collet chuck compatibility (Schaublin): B45 / F48 (A2-5) | F66 (A2-6) - Max. bar diameter with B45 collet: 36 mm - Max. bar diameter with F48 collet: 42 mm - Max. bar diameter with F66 collet: 60 mm - Auto collet chuck through bore - A2-5: 170 mm | A2-6: 210 mm - Collet clamping force at 5 bar - A2-5: 2700 daN | A2-6: 3400 daN - AC motor drive: 15 / 18.5 kW (100% / 50% DE) - Motor ...

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 € : 1 : 1580 € : 2.000 x 50 mm : 250 x 50 mm : 400 - 2800 1/min : 35 mm : 2.2 kW : 1160 mm : 700 mm : 1850 mm : 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excellent condition - Fully operational - Loading / Transport possible! Workpiece: Max. clamping diam. 26 mm 9 main spindles: Spindle 1 to 6: rated torque 18,5 Nm max. torque 50 Nm Max. speed 7,000 rpm Spindles 7 to 9: rated torque 15 Nm max. torque 30 Nm Max. Speed 10,000 rpm Travels (cross slide): X (spindles 1 to 6): 70 mm X (spindles 8 to 9): 110 mm Z: 125 mm Feeds: 30 m/min Feed power: 3kN Travels (longitudinal slide): X: 16 mm Z: 300 mm Feed power 3kN Feeds: 30 m/min CNC Siemens 840 D Swarf conveyor and chiller 21,1 Kw Knoll chiller With CUCCHI compact bar feeder 26 mm (rounded), 19 mm (squared), 22 mm (hexagonal) bar length: 4200 mm

Applied Biosystems Thermo Fisher Scientific SimpliAmp IS VERIFLOW Thermal Cycler Year of manufacture: 2021 The SimpliAmp Thermal Cycler™ is a small-sized, easy-to-use, and accurate thermal cycler that meets the needs of any laboratory for everyday PCR activities. Thermal accuracy: ± 0.25°C (35°C to 99.9°C) For use with (equipment): GeneAmp 2700, GeneAmp 9700, Veriti Thermal Cycler, 2720 Thermal Cycler Dimensions: 46 x 24 x 21 cm (18.1 x 9.5 x 8.3 in) Voltage: 100 to 240 V Product Type: Thermal Cycler Temperature range: 0°C to 100°C Power: 600 W Number of programs: >1,000 protocols Weight: 8.3 kg (18.3 lbs) High-speed compatibility: Not compatible with broadband (manual) Thermal uniformity: < 0.5°C (20 s after reaching 95°C) Capacity: 96-well Display Type: 8-inch color TFT LCD touch screen User interface: USB, Wi-Fi, Ethernet Max. temperature rise: 4°C/s  ...

Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 | The machine underwent a complete factory overhaul by CHIRON in 2013. | Operating hours: approx. 80,374 h | Spindle replacement: March 2021 – spindle hours: approx. 8,000 h | Last maintenance performed: January 2024 | Technical Specifications: | Control: Siemens 840D (PCU50, NCU572.4) | NC swivel head | High-speed package: Motor spindle up to 12,000 rpm, 140 Nm | Travels: X 6,000 mm / Y 630 mm / Z 550 mm | Rapid traverse in X / Y / Z: 60 m/min | Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal | Production package: | Scraper belt conveyor, discharge height 1,050 mm | Preparation for internal coolant supply (IKZ) | Vacuum rotary filter KNOLL VRF250 (for steel, cast iron, aluminum, plastic, brass) | High pressure 70 bar with HP pump and variable valve | Automatic loading doors ...

Grain sampler type 1938 DRP, 1/4 liter prober With wooden case, complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray With full set of weights (100g, 50g, 2x20g, 10g, 5g, 2x2g, 1g, 500mg; Very good condition: tested, calibrated and recalibrated 2026 (valid until 2030). The device was calibrated, not the scales and the weights. We recommend using a calibrated laboratory scale, which we can offer to match.

band width:1050 mm plate thickness:8 mm number of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mm FEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mm LEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/min ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOA ...

grinding length:600 mm centre height:180 mm swing dia.:360 mm workpiece weight:80 kg max. dia. of grinding wheel:500 mm grinding wheel width:80 mm grinding wheel hole diameter:203,2 mm peripheral speed:45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system.

workpiece diameter:26 mm swing diameter:- mm workpiece length:66 mm total power requirement:12 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

x-travel:2000 mm y-travel:1600 mm z-travel:1140 mm b-axis:0.0001° x 360° ° number of pallets:4 table surface area:1000 x 1450 mm max. table load:6.000 kg turning speed range:4 - 10000 U/min power capacity at 100 % load:40 kW kW tool taper:HSK100 DIN69893A machine weight ab.:63.000 kg space required L x W X H:12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers

pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden

grinding diameter:380 mm grinding length:1000 mm centre height:180 mm grinding wheel diameter:400 mm max. workpiece weight between centres:250 kg total power requirement:10 kW weight of the machine ca.:4,1 t dimensions of the machine ca.:3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank

diameter:300 mm tool adaptor:40 Weight:5 kg Taper ISO 40 Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

diameter:200 mm Weight:4 kg Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

faceplate diameter:4770 mm swing diameter:7000 mm turning height:1000 mm slide stroke:1000 mm workpiece weight max.:100000 kg faceplate turning speed range:2 - 20 U/min feed speeds:1 - 10000 mm/min rapid traverse:10 m/min ram head dimension:250 x 250 mm main drive:100 kW total power requirement:200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment

grinding diameter:300 mm grinding length:600 mm centre height:190 mm z-axis:865 mm x-axis:250 mm clamping length:1000 mm peripheral speed:45 m/sec grinding slide swivable +/-:8 ° grinding wheel width x diameter:80 x 508 mm work piece spindle speed:1 - 800 U/min weight of the machine ca.:5 t Machine with SIemens 840 C control - coolant device - Marposs measuring device

faceplate diameter:2500 mm swing diameter:2500 mm swing diameter:2500 mm turning height:2500 mm turning speed range - faceplate:1,8 - 140 U/min workpiece weight max.:15.000 kg feeds: 0,03 - 6,3 mm/U rapid speed:2 m/min cross rail adjustment:2150 mm max. ram stroke:1500 mm power capacity:55 kW weight of the machine ca.:32 t dimensions of the machine ca.:4,1 x 7,6 x 6,0 m 1 turret head 1 RAM head

faceplate diameter:1600 mm swing diameter:1800 mm turning height:1500 mm max. ram stroke:1200 mm faceplate turning speed range -stepless-:2,5 - 250 U/min workpiece weight max.:10.000 kg ram head dimension:240 x 240 mm feed range:1 - 3000 mm/min power capacity:45 kW weight of the machine ca.:20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

number of spindles:9 spindle passage:46 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SC9-46 Yob: 2016 Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindles Main spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 Nm Cross slide units, transverse: 6 units, in positions I to VI, Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V, Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpm Cross slide units, transverse: 2 units, in positions VIII and IX, Control: Siemens SINUMERIK 840SL with double NCU Software: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted, Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion) Synchronous action package ?Level? 2, incl. cross-mode actio ...

number of spindles:8 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AG20 Yob: 2002 eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, con ...

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)

number of spindles:6 spindle passage:36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com