127,274 used machines on RESALE, but how to find them? Machine Search
NEW, 250 cm width, 1.05 m³ capacity, with Kramer / Claas Scorpion mount, 364 kg net weight
285 cm working width, suitable for Doosan, Daewoo wheel loaders
suitable for forklift Telelader and wheel loader with standard Pallet rack attachment
cutting width 130 cm, weight 50 kg
NEW, suitable for telescopic loader & Unimog wheel loader, 1 piece à ⬠400,-
Schwarzmüller AZ S08 container carriage, Drawbar trailer, Technical specifications:, - Dead weight: 2,600 kg, - Wheelbase: 2,150 mm, - Gross vehicle weight: 18,000 kg, - Hz. Axle loads [2]: 9,000 kg, - Payload: 15,400 kg, Characteristics:, - 4 container closures, - Trough container recording & encryption, - High air suspension => suitable for all BDF heights, - incl. disc brakes
Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording
HS Schoch hydraulic slope bucket, Technical specifications:, Recording: SA02 / MS 01, Cutting width: 1000 mm, Net weight: 82.80 kg, Volume: 0.055 l, Year of construction: 2023
Hauer snow plow SRL 2S 2800, model: SRL 2S 2800, Construction year. 2017, With mounting plate for Schäffer wheel loader, including hydraulic side adjustment [efficient on sidewalks and/or roads]
SCHULTE horizontal log bandsaw line, type HB 12, - Max. log diamter 1250 mm, - Cutting length up to 8 m, - New motor 37 kW - frequency drive, - Log carriage with manual clamping
SCM Tenomac Spigot & Slotting Machine Motor 7.5 KW 380V Spindle 50 mm Length 320 mm Tool diameter maxi: 350 mm Mini: 250 mm Stroke 265 mm Speed: 3250 rpm Slot table feed : 3 and 12 m. Cross-cut saw unit : 2800 rpm. Saw blade diameter 400 mm Motor 3 KW 220 V Good condition - ready to ship
Advanced programmer Central air table Side tables with air Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Cutting line Rear table cover opens for easy cleaning of the machine Spare knife Chrome table surface anti rust Cutting sticks, operating tools, paper tapping block, documentation. Technical data: Working width 920mm Stack height 120mm Weight 1720 kg 380V power supply Complete cleaned, checked and tested In full working conditions
50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...
Manufacturer: Schmid Model: 25 Year of Manufacture: 2011 Description: Pass Through spray cleaner Accessories :Switch Cabinet. Media Cabinet Condition : Very Good Voltage: 400 V Frequency: 50 Hz Exterior Dimensions - Width 196.850 in (500.0 cm) - Depth 59.055 in (150.0 cm) - Height 250.000 in (635.0 cm) Find more here - / Contact us at -
An electric guillotine shear L. Schuler (Göppingen) is available. Working width: 1000mm, max. sheet thickness iron/steel: 2.5mm/2mm, flywheel speed: 100rpm, power requirement: 4HP. An on-site inspection is possible.
Manufacturer: SCHMID Model: PremiumLine Year of Manufacture: 2010 Power Requirements : 380 V 93.0 A 50 Hz 3 Phase Exterior Dimensions : - Width 11,500.000 in (29,210.0 cm) - Depth 184.000 in (467.4 cm) - Height 151.000 in (383.5 cm) Accessories: Various spare parts: pumps, brackets, angle pieces for piping, pipes, screws, washers, sensory Complete SCHMID DES-PremiumLine etching system, available from inlet to outlet. The system consists of 14 individual modules, including piping, wastewater buffer tanks, pumps, valves, sensors, control cabinet, PC, and spare parts. The configuration includes two wastewater buffers, one dedicated to the development and stripping modules, and another for the etching modules. Fully equipped and designed for high-precision PCB or semiconductor processing applications. Find more here - / Contact us at -
Max. load: 350kg, no known defects, without accessories, spare parts, or documentation, year of manufacture: approx. 2015. An on-site inspection is possible.
Machine Fully Automatic Side Welding Machine Profi Packer Manufacturer: Schlichter Type: SCV 400 Pro Year of Make: 2020 Longitudinal welding: continuous Photocells: horizontal and vertical (standard) Compressed air: 6 bar Transport speed per minute: min. 5 meters, max. 30 meters Film core Ø: 76 mm Film rolls max. Ø: 350 mm, with optional folding bracket 700 mm! Film roll width max.: 650 mm Welding punch width: 300 mm Product width min. and max.: 50 mm to 410 mm Min. and max. product height: 1 to 250 mm Product length min. 50 mm, max. unlimited Film thickness: from 7 to 80 mμ Film material: polyolefin fine shrink films, polyethylene, PVC; PLA and other bio films Output per minute: up to approx. 85 cycles Machine dimensions (L x W x H): 2,200 x 1,680 x 1,800 mm Weight: 800 kg Shrink tunnel: Type: SCT 400U Year of Make ...
Manufacturer: Hermann Schwammberger Model: DLMEh 450 / 50 / 3250 Year of Manufacture : 2017 Type of Machine : Hardening furnace strip line Heating Power: 96 kW Total Current: 136 A Rated Temperature: 1,120 °C Certification: CE Find more here - / Contact us at -
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.
Key data: 6000 mm
Hydr. Long bending machine with roller shears
The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...
Equipment: Spacious interior with stainless steel shelves and doors for optimal sample organization Strong insulation for constant temperature even in the event of a power failure Digital control element with temperature display RS232 interface for external monitoring and data acquisition Robust castors for easy transport Condition: Used, functional With slight signs of wear (see pictures) Interior clean and fully equipped
BIG SUN heavy-duty bucket 210 cm with Hardox cutting edge, - with Liebherr 506 recording
- Live tools 30 kw and 3000 Rpm with Sk50 - Full C-Axis 360.000 - Work load 10.000 Kg - Grinding spindel 30 kw and 3000 Rpm with Sk50 - Chip conveyor - Tool holders included max 400 mm height -
Calibrating sanding machine SCM SANDYA 20 mod. 20 M3 135 used Year of manufacture 2003 Nr. AE/024903 series maximum workable width mm. 1350 Forward speed 3.5-18 mt/m with inverter workable height 4-170 mm vacuum hob KW 7.5 Composition: I° group: calibrating roller in grooved steel D. 250 - KW 22 motor II° group : sanding roller d. 250 hardness 45 SH - motor 2 speed KW 9/11 rpm 1400/2800 III° group: combined roller d. 170 hardness 30 SH + 46-sector sectioned elastic buffer - motor KW 11 with inverter I° group : scotch brite satin roller Flat positioner with workpiece tape development mm. 2620 x 1370 II° and III° belt blowers Automatic belt centering Electronic intervention I° roller / II° roller / III° roller / buffer
1 BRÜCKNER open width washing range type SCOUT TR 3/3, year 1995, fully overhauled by BRÜCKNER in 2010 with new software and SIEMENS 15" touch screen, 6 compartments (3 with rotary washers + 3 dwell compartments)
used
Manufacturer: Komptech Model: Multistar Star Screen (including control unit) Find more here - / Contact us at -
saw blade diameter: 315 mm dimensions of saw-blade: 350 x 40 x 2,5 mm cutting diameter: 90 mm capacity 90 degrees: flat: 150 x 90 mm capacity 45 degrees: round: rechts & links 90 mm capacity 45 degrees: flat: rechts & links 105 x 90 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 75 x 70 mm cutting speed: 33 / 66 m/min total power requirement: 1,8 kW weight of the machine ca.: 340 kg dimensions of the machine ca.: 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used shelving rack / TOP CONDITION Manufacturer: SSI SCHAEFER Type: R3000 Condition frame: used / pre-assembled Condition shelves: used Blend 1408 pieces Frame height 2,500mm / depth 600mm / max. bay load 900 kg / galvanized 6400 pieces shelves 1.280x600mm / shelf load 150kg / galvanized 384 pieces of tension cross bandages Quantities are also possible, please ask for your desired quantity Position: 128 x rows of shelves with 10 compartments each. 5 x shelves per field Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please inquire about your transport costs. Errors / prior sale of used goods expressly reserved.
General SKU366W1274 LocationBarneveld MakeSchallex No.15673 Year of construction1996 Pressure Working pressure1 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4552 Capacity1000 l Vessel sizesdia. 900x1300mm Dished frontscheck Manholecheck DN500 Top connectionscheck Outletcheck Max. temperature80°C Information Mounted on legscheck Floorspace0,9x1,3 m Total height1,50 m Weight500 kg Extra SpecificationsWith level sensorsPressure vesselsSchallexTanks > Pressure vesselsBrand > Schallex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...
General SKU366W1273 LocationBarneveld MakeSchallex No.15673 Year of construction1996 Pressure Working pressure1 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4552 Capacity1000 l Vessel sizesdia. 900x1300mm Dished frontscheck Manholecheck DN500 Top connectionscheck Outletcheck Max. temperature80°C Information Mounted on legscheck Floorspace0,9x1,3 m Total height1,5 m Weight500 kg Extra SpecificationsWith level sensorsPressure vesselsSchallexTanks > Pressure vesselsBrand > Schallex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...
General SKU366W1282 LocationBarneveld MakeSchott Engineering No.k06298-300 Year of construction1997 Pressure Working pressure1 Bar Technical specs Max. temperature150 °C Specified Features - Distillation Distillation installationcheck Capacity770 l. Column sizesdia. 400x4200 mm Number of columns:1 Max. temperature150°C MaterialGlass Information Total height4,20 m Floorspace0,55x0,55 m Extra SpecificationsPacking type Durapack prototype :DistillationSchottColumns > DistillationBrand > Schott What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU294W557 LocationBarneveld MakeSchwarz TypeLP 600/800 No.01-56738 Year of construction1999 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelsOn legs Floor space1,10 x 1,10 m Total height3,0 m Extra SpecificationsVolume 190 l. max pressure 10 bar. max temperature +2°C/+150°C Miscellaneous filtersSchwarzFilters > Miscellaneous filtersBrand > Schwarz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU321U756 LocationBarneveld MakeScan Vibro TypeTRS 300x1019 No.37943 3 Year of construction2007 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter300 Feeder length1019 Closedcheck InletDia: 250 mm OutletDia: 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) Information Mounted on framecheck Total height1,33 m Weight230kg CEcheck Floorspace1,7x0,63 m ATEX compatiblecheck Extra Specificationscapacity. 12 ton/hVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
General SKU321U754 LocationBarneveld MakeGea Scan Vibro TypeTRS 300x1019 No.37943 1 Year of construction2007 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter300 Feeder length1019 Closedcheck InletDia. 250 mm OutletDia. 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) Information Mounted on framecheck Total height1,33 m Weight230kg CEcheck Floorspace1,7x0,63 m ATEX compatiblecheck Extra Specificationscapacity. 12 ton/hVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...
General SKU321U755 LocationBarneveld MakeScan Vibro TypeTRS 300x1019 No.37943 2 Year of construction2007 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter300 mm Feeder length1019 mm Closedcheck InletDia: 250 mm OutletDia: 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) Information Mounted on framecheck Total height1,33 m Weight230kg CEcheck Floorspace1,7x0,63 m ATEX compatiblecheck Extra Specificationscapacity. 12 ton/hVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...
General SKU386W1189 LocationBarneveld MakeWipotec / OCS TypeSC 3000 C Mach.No.1100113 Main Features MaterialStainless steel Motor2.4 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) CapacityScanning speed 50m/min Motor2,4 kVA, 230 volt CapacityMax transport weight 10 kg Information Year of construction2011 Total height2,10 m CEcheck Floor space2,10x1,20 m Weight450 kg Extra SpecificationsIn and output belt conveyor, dimensions 270x1800 mm, X-ray tube, type MIR-160 HP/20 Touchscreen monitor control camera system Reject unit with 3 magnetic keys for different machine access levels. MiscellaneousWipotecMiscellaneous > MiscellaneousBrand > Wipotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
General SKU265T574 LocationBarneveld MakeSCAN VIBRO TypeTRS No.41024 Year of construction2010 Main Features MaterialStainless steel Length2800 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder diameterDia: 250 mm Feeder length2800 mm Closedcheck InletDia: 200 mm OutletDia : 200 mm With vibro motor2x scan-vibro 0,20 kW, 230/400 Volt, 980 rpm Without controlscheck Information Total height1,2 m Weight200 kg Floorspace3x0,4 mVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU231U213 LocationBarneveld MakeSchenck TypeMechaTron No.V061565B01 Year of construction2007 Main Features MaterialStainless steel Length570 mm Width115 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder width115 mm Feeder length570 mm Feeder height55 mm Closedcheck With hoppercheck (380 Ltr.) InletDN150, DN200 OutletDN150 With vibro motorcheck (JVM type: JD 40) Without controlscheck Information Total height1.6 m Weight170 kg CEcheck Floorspace0.8x0.7 mVibro feedersSchenckConveying systems > Vibro feedersBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU297T690 LocationBarneveld MakeSchrader No.1082 Year of construction1989 Pressure Working pressure0 Bar Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume215 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Stirring vessels With paddle stirrercheck EKATO agitator type EM040 ( without mechanical seal) Closed stirring vesselcheck Capacity215 Ltr. Vessel sizesDia. 600x700 mm Dished bottomcheck Dished top sidecheck OutletDN 50 With jacket26 Ltr. Max. temperature200 °C With paddle stirrercheck EKATO agitator type EM040 ( without mechanical seal) Counter rotating stirrercheck Motor1,5 kW 220/380 Volt Speed mixing shaft80-400 rpm Information Mounted on legscheck Floorspace0,9x0,9 m Total height2,5 m Weight500 kgStirring vesselsSchraderStirring vessels > St ...
General SKU293X396 LocationBarneveld MakePall Life Science TypeLevmixer and magnetic mixer tank No.SVE220038 Year of construction2022 Pressure Working pressure6.2 Bar Main Features MaterialStainless steel Volume650 Ltr. Motor0.18 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Open stirring vesselcheck Capacity650 l. Vessel sizesDisposable bags 650 l. Max. temperature-5°C/+90°C With propellor stirrercheck Magnet mixer Motor0,18 kW, 220-240 volt Speed mixing shaftVariable Information Mounted on legsOn wheels With switchcheck Weight500 kg CEcheck Floorspace1,70x1,20 m Total height1,55 m Extra SpecificationsWith Minebea Intec weighing cells, type Midrics 2, : 2x input hoses, 2x disposable bags 650 l. Stirring vesselsPall life scienceStirring vessels > Stirring vesselsBrand > Pall life science What you can expect from Foeth: -- M ...
used
height: 2250 mm weight: 4200 kg weight max.: 100 t width: 1500 mm length: 700 mm : 2 Stück The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 10 Positionen weight: 30 kg condition: neu : 28 mm 5 screw clamps Thrust length 155 mm Length 300 mm Condition: new Hole diameter 28 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The LiquiPrep LP804 50/20 by Material Preparation and Feeding Unit is a state-of-the-art automated system designed for the continuous, bubble-free supply of high-viscosity media, including gap fillers, thermally conductive pastes, and adhesives. It boasts a tank capacity of 53.5/24.6 L (gross) with an agitator speed of 39 rpm and a maximum feed pressure of 12 bar. This machine includes a diaphragm pump with a volume of 100 ml per stroke and a vacuum pump rate of 267 l/min. The package comes with the DOS P300-2C01 dispensing head and the flexible DOS-GP-1C01 Logic control unit. The unit is suitable for electronic control systems and offers modular, low-maintenance integration for seamless automation. Available for immediate purchase in [Location TBA].
Execution Suitable for potatoes and carrots Capacity: 10 kg Automatic water jet supports the discharge of peeling waste Safety microswitches on door and lid Easy to use Quality Housing and containers made of stainless steel Transparent plastic lid (control of the work process) Connection Power: 750 watts This device requires a fixed water connection Metrics External dimensions: W x D x H: 400 mm x 770 mm x 860 mm Scope of delivery 1 grating plate Guidelines Of course, produced in accordance with the hygiene and safety guidelines Article bears CE marking in accordance with the directive Material complies with European food standards Dimensions Width 400 mm Depth 770 mm Height 860 mm Details Capacity 10 kg Hourly production 120 kg/h Timer function 0.00 min to 4.00 min Power supply Power 750 watts Voltage 230V Phase(s) 1N/PE Frequency 50 H ...
maximum number of results exceeded
please refine your search
