127,272 used machines on RESALE, but how to find them? Machine Search
sheet width: 4080 mm plate thickness: 2.0 mm ST thickness at Niro-steel: 0.8 mm Sheet thickness for ALU: 2.5 mm no. of strokes: 34 Hub/min cutting angle: 1.3 Grad distance between columns: 4310 mm back stop - adjustable: 15.0 - 750 mm table height: 820 mm Control: ELGO engine output: 9.0 kW weight of the machine ca.: 3600 kg. range L-W-H: 5250 x 2200 x 1400 mm Good condition () Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in ...
cutting diameter: 250 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 290 x 210 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 210 x 200 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 130 x 130 mm capacity 60 degrees: flat: 140 x 130 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: 940 mm total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable qu ...
Little-used guillotine shears, only occasionally 1.5 mm sheet thickness Stroke rate 56/ min. Power (Rm 400/mm) 3.5mm Rated power 4.0 kVA Weight 860 kg
chucking diameter: 250 mm workpiece dia.: 200 mm control: Siemens 840 D sl c-axis: Position genauigkeit arcs 10 tool turret with 12 work positions: 12 turning spindle: 2 spindle turning speed range: 6.000 / (4.500) U/min Spindle power: 26 / (28,3) max. torque on the spindle: 150 / (300) spindle nose: 55026 - A6 tool taper: VDI 40 turning speeds: 10.000 U/min z-travel: 370 mm x-travel: 30 mm y-travel: +- 40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We are offering for sale a Robotic 3D welding station consisting of a welding robot and two rotary tables. Manufacturer: Gernert Schweißtechnik Model: OTC DR 4200L Year of Manufacture: 2001 Find more here - / Contact us at -
Specifications: Procedure: 2-stage Filter area: approx. 17 m² Separation efficiency: >99% Welding Fume Separation Class: W3 Extraction capacity: 1100 m³/h Diameter of extraction arm: 150 mm Length of extraction arm: 3 m Power connection: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions, approx.: 785 x 730 x 950 mm Weight, approx.: 106 kg Characteristics: - Made in Germany - For low to medium smoke/dust quantities - Suitable for occasional to frequent use - Convenient filter change through maintenance door - Extraction hood can be rotated and swivelled 360 degrees Equipment: - 3 new replacement main filters (original price approx. 330 euros each) - 7 new replacement pre-filters - 2 extraction hoods (one of them unused)
Complete brewery 2 appliances - 6 hl per brew 1 brew per day possible Year of manufacture 2013 - Manufacturer: Caspar Schulz / Germany Consisting of: malt reception and transport 2 devices brewhouse - lauter tun - wort cooler - fermentation and storage tanks - brewhouse technology complete - bottle filler - KEG cleaner etc. - PROJECT: BRAU-KOMPLETT-25-6HL-2GER-HEBAF
Double-end profiler Schröder Double-sided tenon cutting and slitting machine For window production and frame woodworking Type T2701 Working width max. 4000 mm 3 motors per side: Shortcut saw 3 kW Milling machine 7.5 kW Milling machine 9.2 kW Shortcut saw swivel Saw blade diameter 400 mm Horizontally controlled against 8-fold turret head Milling units controlled horizontally and vertically for holding 2 tool sets each Diameter of the milling shafts 40 mm Clamping length 240 mm, tool diameter up to 400 mm Electric width adjustment Pneumatic clamping of workpieces Eject to the rear Automatic feed 15m/min. Return 30 m/min. Gentle cycle at cutting points 5m/min. Feed motor 0.09/0.85 kW Control cabinet with control With occupational safety barrier Dimensions 5800 mm x 2320 mm x H 2000 mm + Control cabinet 1200 mm x 800 mm H 1600 mm + Barrier depending on ...
diameter: 290 mm Number:: 095418 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Printing plates intermediate table Screen AT-T 4000; cleaned and tested; Inlet width 850mm; suitable for screen imagesetters. Plate conveyor Screen AT-T 4000; cleaned and checked; working width 850mm; used for screen CTP.
Type: 750 Serial number: 13909 Year of construction: 2005 Mixer: double shaft paddle mixer Capacity: 2000 liter, up to 1000 kg Speeds: 15 / 30 RPM Infeed height: 2200 mm Outfeed height: 800 mm Vacuumpump: liquid ring SIHI LEMB 161 Water: 800 liter/hr Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 13kW Dimensions: 2800 x 2300 x 2400 mm Weight: 2500 kg
Manufacturer: Perfecta Schmid Model: DUPLOMAT 86 N ELTRON III Power Requirements: 3 x 380 V, 50 Hz Find more here - / Contact us at -
Progressing cavity pump SCHUBAG 4,300 l/h with pre-prepared hopper Properties: Length 2750 mm Width 500 mm Total height 950 mm Weight 290 kg Motor power 5.5 kW Working pressure range 12 bar Material V2A (AISI 304) 1.4301
Siemens SCALANCE X005 Item number: 6GK5005-0BA00-1AA3 Type: Industrial Ethernet Switch, unmanaged, 5 ports (RJ45, 10/100 Mbps) Supply voltage: 24 V DC Power consumption: approx. 0.1 A Weight: approx. 0.3 kg Condition: used, tested Price without VAT per piece Country of origin: Germany Pieces: 2
-Year 2005 -Suitable for Heidelberg Speedmaster 52 -Size: Max. 370x520 mm, Min. 100x100 mm -Speed: Max. 15000 /Hours -Adjustable Height -Delivery belt with adjustable speed and height
Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)
Made in sturdy painted carbon steel, Size and angle depending on availability of the moment
3 identical vertical heating oil storage tanks, each with 100,000 ltr. Due to the switch to gas no longer in use By Schallex Apparatebau H. Balogh GmbH Capacity per tank 100,000 l No. 6618/-2D/6601/ 2650/2 Year of manufacture 1992, pressure-resistant up to 2 bar
- Portable / Transportable with levelling schoes AWF Fixatoren - ROD Heidenhain indexing scale with Dro - Left and Right rotation in 3 indexing feed rates - Power 18 kW - Quick posititining fixed angle 0-90-180-270 Gr
- set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE - Jaw width 90 mm - Jaw height 75 mm - Hole to hole jump length ways 125 mm - Hole to hole jump in width 250 mm
- set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE - Jaw width 90 mm - Jaw height 75 mm - Hole to hole jump 125 mm
- CNC Dresser KW with Siemens 840D new in 2002 - HeidenHain measuring scales - Siemens Servo engines - Crankshaft and External grinding - Large steady rest package - Large stone and flanch package
- Range off edge radius Manual 20 - 500 - Range off edge radius Automatic 150 - 500 - Hydraulic Controllable forming roll drive - Hydraulic displacement drive - Clamping device without hole - Max. pressure manipulator 2000 Psi / 140 bar - Max. pressure press 5700 Psi / 400 bar - Max. speed forming roll 170 M/Min - Basket bottem - Knocker bottom - Pressure vessel bottom - Boiler bottoms - Flat floor - Plate base - diffuser bottom - Tank bottom - Tank bottom - Radar reflectors - Engine parts - Dispense air - Silo hoppers - Cooker hoods - Container parts - Hemispheres
A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.
X-axis: 400mm, Y-axis: 250mm, Z-axis: 200mm, table dimensions: 560x426mm, acceleration: 500mm/s², resolution: 0.1μm, measuring temperature: 20 ±0.5°C, max. workpiece weight: 50kg. Length: 930mm, width: 870mm, height: 1570mm, weight: 530kg. On-site inspection is possible.
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Key data: 300 mm
Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg
High rack stacker, 1250 kg load capacity, approx. 7,850 kg dead weight, with charger. Battery defective. Mast has to be dismantled for transport.
Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.
Length : 1430 mm Width : 620 mm Height : 1540 mm Shrink tunnel : (l)850 x (h)600 mm Kind of strap : polypropylène Strap width : 12 mm
Spindle speed: 9000rpm, spindle tilt: -5°/45°, spindle stroke: 1000mm, spindle diameter: 30mm, table dimensions X/Y: 750mm/600mm, table height: 880mm, weight: approx. 300kg. An on-site inspection is possible.
: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...
PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, Constructed in year 2000 - very few hours of work, NEW Crammed feeder new 2023 FF85VE, 60 kw Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, Manual screenchanger, NEW 2023 Water ring pelletizer WF150, Drying centrifuge, Total installed power cutting group 14 kw, Vibro classifier, Total weight about 3 Tonnes, excellent conditions, MATERIALS: PE PP PC PS ABS PS, capacity: ca.200 kg/h depending on materials and feeding rate, availability: ready-to-go
Electronic cards for Schnieder Senator cutter built in 1990. Can ship worldwide.
pressure: 10 t stroke: 8-40 mm no. of strokes: 120-600 Hub/min ram - range of adjustment: 40 mm table surface area: 380x240 mm ram surface: 220x140 mm hole in the table: 220x110 mm table height: 910 mm tool hole in ram: Ø 30 mm throat: 135 mm total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: BxTxH 1000x1500x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
pressure: 7 t throat: 180 mm stroke: 100 mm table surface area: 320x300 mm ram surface: Ø110 mm hole in the table: Ø50 mm table height: 850 mm tool hole in ram: Ø30 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1300x1300x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cup filler, make Schutten, year of manufacture 2005 with lifting and tilting device, - 2-lane rotary conveyor with matching lifting and tilting device for standard trolley 200 l, - Suitable for filling chunky masses (e.g. delicatessen salads), pasty products (e.g. mayonnaise, spreads), - Stations: unstacking cups, filling, sealing, ejecting, - Sealing foil from roll, sealing tool with integrated cutter, - Format set for butchers cups (112 x 86 cm), - Filling capacity: 15 – 35 cycles per minute (corresponds to 30 – 70 cups), power: approx. 19 bars / min (= 38 cups)
Agitator tank, make Schwarte - Milfor, year 2015, unused, for oil and other liquids,, stands on load cells,, Content: 1,000 liters, Inside diameter: 1,000 mm,, cyl. height: 1,250 mm,, outlet height: 500 mm,, single-walled/uninsulated on the top floor,, double-walled / insulated on the cylindrical shell and underbody,, with pressure-resistant heating/cooling system, Jacket space: 30 liters,, Permissible operating temperature: up to max. 85°C.
Salt spray test by Weiss Salt Spray Test Chamber with Corrosion Testing Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: Room temp. up to +50 °C Condensation water test: Room temp. up to +45° Extensive documentation available incl. wiring diagram, parts list, manual, etc The plant is still fully functional. It is located in a research facility and has rarely been used.
Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.
Working width: 410 mm Length of the planing table: 1450 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2650x850x1100 mm weight of the machine ca.: 750 kg Surface planer F 410 N ----------------------------- Technical manufacturers description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----------------------------- Price of the above machine on request! -------------------------- ...
faceplate diameter: 5500 mm swing diameter: 6000 mm turning height: 4400 mm turning speeds: - U/min main drive motor: - kW Control: FAGOR 8055 workpiece weight max.: 100 t ram stroke each side: 1500 mm cross rail - adjustment: 3000 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m equipped with: - CNC Control 8055 - 1ram on Crossbeam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 150 mm x-travel: 14300 mm y-travel: 4100 mm : 1000 mm : 2500 mm : 900 mm : ISO 50 : 5,5 - 1000 U/min : 55 kW : 4000 x 3500 mm : 60 t control: Fagor 8055 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - Fagor 8055 CNC control - CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t - Coolant system (external) - Telescopic covers for the guideways - Operator platform attached to the spindle box - Plate field 2x 6000 x 2000 mm each The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm turning speeds: U/min main drive motor: 70 kW Control: FAGOR 8070 workpiece weight max.: 20 t column daylight: 3300 mm milling motor: 16 kW feeds crossrail-slide vertical: 3000 mm/min feeds crossrail-slide horizontal: 3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC Control FAGOR 8070 - C-axis (angular positioning of the table) - angular milling Head - Telescopic covers of the cross rail and columns guideways - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...
maximum number of results exceeded
please refine your search
