sc 43 used for sale

Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch

Band saw HOLZKRAFT HBS 433- Exhibition machine - saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever---------- Technical data ----------rollers Ã: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 Â, motor 400 V: 1.5 kW, suction nozzle Ã: 2 x 120 mm, Cutting speed: 900 / 450 m/min., Dimensions (LxWxH): 768 x 512 x 2,048 mm,

BIESSE ARTECH edgebander mod. Used Akron 430 A T Technical data: panel length min/max mm. 140-3200 panel width min/max mm. 85-3200 panel height min/max mm.10-60 edge thickness in rolls min/max mm. 0,4-3 Edge thickness in strips min/max mm. 0,4-8 edge height min/max mm. 14-64 work line height mm. 900 protrusion of the panel from the towing track mm. 25 Towing track forward speed 12 m/min Suction air speed 30 m/sec Supply pressure 7-10 bar SINTRA LT Control entrance guide with mechanical visor -Correction group: nr. 2 KW 1.8 motors with skid copiers Vertical adjustment of tool position - Gluing unit: glue tank capacity kg. 2 nr. 3 compressed air back pressure rollers Numerical display Edge thickness - Shear unit with 2 thrust pressure positions according to the thickness of the edge - Automatic strip edge loader - Trimming unit : nr. 2 motors KW 0.50 copier with ski ...

centre height: 200 mm centre distance: 1.000 mm spindle turning speed range: 1600 U/min spindle bore: 42 mm turning length: 1600 mm turning diameter over bed: 410 mm : 230 mm machine weight ab.: 1.700 kg dimensions: 2000 × 1000 × 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 430 mm z-travel: 510 mm control: Mazatrol Smart table surface area: 900 x 430 mm max. table load: 500 kg number of spindle speeds: 40-12000 U/min rapid speed: 42000 mm/min tool magazine with: 30 Plätzen max. tool diameter: 125 mm weight of the machine ca.: 4800 kg Just 4,362 hours of pure machining! Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Min: 150 mm Max. 660 mm Spindle: Spindle speed: 40-12000 (two electrical stages) Feed rate: Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Coolant system V ...

Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.

Puller Wipes 4340x580mm NEWProductor Dimensions : W: 4340mm D: 580mm7 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your peel cloths from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Dimensions: - Width: 1500 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

General SKU327X679 LocationBarneveld CEcheck MakeLauda Main Features Heating (medium)Water glycol Capacity5.7 KW Specified Features - Temperature control unit MaterialCopper Temperating machinecheck pumpstation With pump2x Grundfos Motor2 x (2,2 kW, 400V) Information TypeLSI 51 437 Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck Floorspace1,00x2,00 m Total height1,25 m Weight1000 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from a Wanderer milling machine type: KFH401 -Travel: approx. 1000 mm -Width: 400 mm -Length: 2000 mm -Height: 330 mm -Plate thickness: mm -Table height: mm -Plate: Solid -Groove width: mm -Dimensions: 2280/430/H330 mm -Weight: 934 kg

Gear motor, electric motor, three-phase motor -Transfer in current condition as seen -Gear base: broken -Speed: 0.16 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 640/250/H240 mm -Weight: 42 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox Lenze type: 11.431.10.08.1 -Manufacturer Engine ATB Type: ERFY 0.55/4-7 -Engine power: 0.37 kW -Speed range: 111 to 617 rpm -Motor: adjustable -height shaft axis: 50 mm -Quantity: 1x available -Price: per piece -Drive shaft: Ø 16 mm -Dimensions: -Weight: 22 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.0 kW -Speed: 1420 rpm -Volume flow: m³/h -Pressure: Pa -without: housing -Impeller outside: Ø 430 mm -Impeller inside: Ø 270 mm -Sash: 100 x 180 mm -Sheet metal plate diameter: 650 mm -Sheet metal plate bolt circle: 600 mm -Number: 3x fans available -Price: per piece -Dimensions: 400/650/H650 mm -Weight: 52 kg

Stacking boxes, stacking boxes, plastic boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -External dimensions: 400/300/H220 mm -Interior dimensions: 340/268/H200 mm -Quantity: 144 pieces of boxes available -Piece: 6 euros net from stock -Minimum order quantity: 5 pcs -for larger purchases: price on request -Own weight: 1.5 kg/piece

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 -Individual components: see photos -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL -Individual components: see photos -Total dimensions: 440/380/H230 mm -Weight: 11.3kg

4/3 directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer Grebe Control block from Tiromat 3000/430 vacuum packaging system -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm -Weight: 19 kg

controllable gear, adjusting gear, spindle adjusting gear -Manufacturer: PIV, variable speed gearbox type KSC 432 B3 without drive -Speed range: n2 53-255 rpm at n1 2800 rpm -Drive motor: can be supplied at extra cost -Individual components: see photos -Shaft diameter: 24 x 50 mm -Shaft diameter: 16 x 40 mm -Total dimensions: 380/300/H280 mm -Weight: 30kg

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Wago, 8-channel digital input terminal block -Type: 750-431 -Quantity: 1 piece available -Dimensions: 15/67/H100 mm -Weight: 0.1 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustable gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Engine: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 4x gear motor available -Price per piece -Dimensions: 410/280/H200mm -Weight: 16.7 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustable gear: 11.432.10.08.1 130-36 rpm -Brake: 14.448.08.1.0.8 8 Nm -Engine: Type B7KB4-044H 0.25 kW / 1400 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Dimensions: 410/320/H180mm -Weight: 16.7 kg

gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustment gear: Lenze type 11.433.16.16.2 1/88 17-3.3 rpm -Gearbox: Lenze Type 12.603.16.1.1 -Engine HEW type: EEXF 90L/6 0.95 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm -Weight: 66 kg

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 300 mm -Hole: Ø 77 x 400 mm -Number: 13x drum available -Price: per piece -Dimensions: Ø 300 x 430 mm -Weight: 44.8 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 320 mm -Hole: Ø 45 x 310 mm -Quantity: 1x drum available -Dimensions:Ø 320 x 430 mm -Weight: 36.2 kg

grinding drum, deflection drum, belt grinding machine, belt sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 320 mm -Hole: Ø 65 x 300 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 320 x 430 mm -Weight: 50.1 kg/piece

grinding drum, deflection drum, belt grinding machine, belt sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 330 mm -Hole: Ø 65 x 300 mm -Number: 3x drum available -Price: per piece -Dimensions: Ø 330 x 430 mm -Weight: 39.3 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B - 5000 -Art.No.: 295 434 05 -Shaft: Ø 10 x 20 mm -Number: 2x encoders available -Price: per piece -Dimensions: Ø125 x 100 mm -Weight: 0.5 kg/piece

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: Lenze, Type: 11.431.10.08.1 -Manufacturer Motor ATB Type: ERFY 0.55/4-7 -Motor power: 0.37 kW -Adjustable speed range: 111 to 617 rpm -height of shaft axis: 50 mm -Drive shaft: Ø 16 mm -Number: 2 motors available -Price: per piece -Dimensions: 370/254/H190 mm -Weight: 14.5 kg

Manufacturer: IMA mit Verleimung, Type: GX30/E/130/430, Year: 2014, Control: IMA, Software: IMA Woop 10, Barcode: möglich, Maschinensteuerung: IMA Woop 10, Programming station office: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, C axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, Number of milling spindles: 1, Tool adaption system: HSK F-63, rpm 1): 1000-24000, Number of tool changers: 18, Tellerwechseler: 1, Pickup Wechlser: 1, Mitfahrender Werkzeugwechsler: yes, Working widht max mm: 1400, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 2 X 120, Saw unit: yes, Edgebanding unit: yes 2 Fach Rolle, Edgeband hight mm: 55, Magazine Qty:  ...

Manufacturer: Hüllhorst, Year: 1995, Type: KLS 430, Control: Ferrocontroll, Program: 250, Cutting depth mm: 120, Working hight mm: 60, Holz-Querschnitte mm: yes, Positioniergenauigkeit mm: +45-45, Feeding speed max m/min: 3800 kann verlängert werden, Feeding speed continous adjustable: ca.4, Slewing range degrees: yes, Work piece length max mm: no, wood lenght max mm: 500, Loading stations: 5000, Strichcodierung: yes, Saw Blade Diameter mm: 8, Length to slide in mm: yes, Spindles: yes, Drill head vertical controlled spindles: yes, Exhaust diameter mm: yes, machine ready for demonstration: zusätzlich 90 Grad Sägestation und Etikettendrucker, Year :1995

The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A.  ...

Behringer HBP 430Year of manuf. : 1990 ____________Description:Technical Data:Cutting speed (stepless):17-110 m/minEquipment/Accessory:Rawmaterialfeed:Roller conveyor, additionalFinishedpart removal:Delivery tableChipmanagement:ChipconveyorCoolantmanagement:Coolant pumpBandsawcleaning:Wire brushFurther Equipment:Bundle tension

Aggregate replacement motor Scania Type=DC12-45/52/55/56/58/59/60A,ca.350KW general overtaking with 1 year warranty. Request to: info@miw-zeven.de

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Wir verkaufen einen generalüberholten DC12 54A Zündstrahlmotor mit komplett neuen Teilen. Der Motor wird vor Auslieferung aus unserem Werk noch einmal auf unseren Prüfstand gebracht.

Description Filter Hose for Alko Mobil Jet 140 to 300 Material: Polyester, BIA Cat: M, antistatic, Weight 460 g/m² We manufacture every filter size! Prices, delivery times and payment terms on request. Telephone advice at: 05656-9239404

General SKU232U228 LocationBarneveld Main Features Motor0.37 KW Length4500 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter350 mm Length4500 mm Between inlet and outlet4400 mm Shaft diameter130 mm Pitch93 - 300 mm Inlet160x350 mm Outlet350x280 mm Motor0,37 kW 220-240/380-415 Volt Screw speed9,2 rpm Outlet height1430 mm Height between in- and outlet1030 mm Information Makeunknown: missing type plate Floorspace5,2x1,1 m Total height1,9 m Weight550 kg Extra SpecificationsCapacity: 4256 Ltr/hSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pig ...

Package consisting of Artec Eva 3D scanner and Artec Spider 3D scanner in very good condition with power supply, USB cable and transport case. A license for the Artec Studio software must be purchased from Artec for a price of around 2,000 euros. It is not possible to transfer the existing license., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video fra ...

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

screw for PE and PP much more screws (some are new) available

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de

Scania AT-Motor DC12 pump nozzle c.350Kw completely ready for installation without starter+alternator-for emergency power +CHP applications. info@miw-zeven.de

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 760 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 760mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price: â?¬7750 / piece Delivery possible. Please specify your postal code and directly ask.