sc 43 used for sale

Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal  ...

; Gross weight [kg]: 3665; Engine: Scania DC09 072A 02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 480

; Gross weight [kg]: 3815; Engine: Scania DC09 072A 02-14; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 525

; Gross weight [kg]: 4924; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 760

; Gross weight [kg]: 5029; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 760

Key data: 38 KW, 2100 1/min

Scania DC13-313A AT engine completely overhauled only in exchange on request with starter, light nose + belt drive. Engine is completely overhauled ready for installation with 12 months warranty. Old engine must come back to us within 14 days without breakage, cracks and repairable.

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

; Gross weight [kg]: 6265; Engine: Scania DC16 078A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1160

; Gross weight [kg]: 6160; Engine: Scania DC16 093A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger; Water Tank Volume [l]: 975

We offer completely overhauled Scania DC09-74A (#6740881) AT-engine for Doosan dumpers on request with starter, alternator and belt drive in exchange ex works Zeven with 12 months warranty. Old engine must be free of breakage, cracks and repairable and returned to us free of charge within 14 days.

Operating mode: fully automatic/inline or manual Belt Feeding/Insertion: Automatic Band width: 5 mm Output: approx. 36 p/min Option: With Parcel Press and Parcel Stopper Transport speed table belts: Infinitely adjustable Technical documentation: fully available Odometer reading: approx. 50,000 strapping

speed of feed:: 50 m/min feed:: 5 - 99.999,9 mm cuts max.:: 70 - 80 Schnitte/m cross-section width:: 40 mm cross-section heigth:: 40 mm Condition: NEW, Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999 Display digital - Cutting capacity approx.: 70 - 80 pieces/min at 100 mm l ...

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...

Stock Clearance Bread Cutting Machines

Schulz Roller Curve Conveyor with 90° Drive Manufacturer: Schulz Type: Roller Curve Conveyor Angle: 90° Roll width: 490 mm Nominal/external width (NB): 530 mm Inner radius (IR): 1100 mm Number of rolls: 22 pieces conical Rolls Ø conical: approx. 55 ... 80 mm Drive: SEW gear motor Conveying speed: 0.33 m/s 2 height-adjustable supports Total dimensions: approx. 1870 x 530 x 800 mm (LxWxH) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

SPECIFICATIONS: Operating pressure: 12 bar Aerial view: 613 L/min Voltage: 380 volts

Schneider Frequency Inverters

Condition: used, ready for use Year of manufacture: 1998 Control: Siemens 840 C Travel X/Y/Z: 2x600 or 1x1,800 / 425 / 400 mm Main spindle: SK40 / 7,500 rpm / 106 Nm / 14 kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 kg

Ref.nr. 00918 Description d He Plant CNC Bending Machine for fully automatic wire and forming machining. The machine was commissioned in March 2019 and is designed for the cost-effective series production of complex bent wire parts. By combining different machining steps in one system, the SpeedMax series enables extremely efficient production with high precision and repeatability. Manufacturer: SCHMALE Maschinenbau GmbH Model SpeedMax L-20-1-03 Year of construction 2019 Technical data: Commissioning: 03/2019 Total system unit counter: 12,423,581 parts (as of 02/2026) Application: Wire bending and forming Fully automatic CNC-controlled production system Special features: Designed for high volumes and series production High production speed and process reliability Condition Under power can be demonstrated Submission date Immediately by arrangement

3 models available i.e. 15 Pieces Power: 50 - 100 - 160 KVA Type AoCk

Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg

4x mobile 4m privacy screens on castors with door These 4 mobile privacy screens on castors are a flexible solution for your construction site needs. Made of sturdy steel, they offer optimal security and protection with their length of 4 meters and a 1m door. The set of 4 allows for a quick and uncomplicated assembly and dismantling process, making them ideal for use on a wide variety of construction sites. Ideal for privacy or as a barrier - these privacy screens are a must for every professional craftsman's needs. Flooring allows for a beautiful look. They are painted in black, the blue picture is from other walls. The privacy screens were built for 1500€ for a customer. It briefly set it up once and then went bankrupt. Since then, they have been packed on two pallets. Thus, they are almost new.

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

Continuous flow device, with round belt spreader belts Working width 550mm with instantaneous water heater system Fondant station with splash device with melting tank approx. 200l with separate transfer pump (built in 2006) - Tested and cleaned immediately available

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Schuko, overrun relay flow monitor -Type: RS 1 -Number: 1x relay available -Dimensions: 80/50/H110 mm -Weight: 0.3 kg

Offer 24299 Specifications: - Volume flow approx. 2170 m³/h. - Dust bags / chip bags up to 170 L - Connection socket 160 mm - Connector adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Required space W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg

This machine is a mixer, cutter and emulsifier enclosed in one housing The benefits are as follows - space-saving thanks to compact design, - grinding the product in the cutting bowl under the influence of vacuum with simultaneous stirring and cooking - stable end product with repeatable quality thanks to fully automatic process control, - possibility of direct and indirect heating and cooling, - the possibility of producing fine emulsions and paste-like masses, as well as products with fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Main Material: Stainless Steel Agitator tank: 2000 l

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Schuko, overrun relay flow monitor -Type: STW 1 -Number: 2 relays available -Price: per piece -Dimensions: 80/50/H110 mm -Weight: 0.2 kg/pc.

We have stored an associated coolant system Knoll type VRF 450/2250 (built in 1997) at a freight forwarder, so it is not on the pictures. The machine is fully functional and is available immediately.

grinding wheel size: - mm amount: 2 STK Year: unbekannt 0 Grinding discs- 2 pieces Type Spec. 9A 541 JB U76 Max. RPM 2.360 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cam switches, circuit breakers, tap switches, rotary switches, cam switching devices, miniature micro pushbuttons -Manufacturer: Schleicher, cam switches -Type: PK 15 -Voltage: 220V 50Hz -Dimensions: 235/110/H110 mm -Weight 1.1 kg

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Schuko, overrun relay, flow monitor, current monitor -Type: S 225637 -Quantity: 1x relay available -Price: per piece -Dimensions: 115/75/H25 mm -Weight: 0.1 kg

grinding wheel size: 240x16x45 mm amount: 1 STK Year: unbekannt 0 Grinding disc Max. 2620 .T/M Profil 240x16x45 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 900 mm, 200 mm

SPECIFICATIONS: Workspace: X: 3000 mm Y: 900 mm Z: 200 mm Main motor: 9.9 kW 18000 rpm CNC control No tool changer 1 vacuum pump 3 kW 120 m³ 6 positionable bars

Crane remote control, crane control, crane control, pendant control, control switch, control bottle, empty housing for pendant control -Manufacturer: Schneider Electric, Harmony Empty housing for pendant switch Original packaging -Type: XACA08 -Cardboard dimensions: 570/90/H85 mm -Weight: 0.8 kg

ABA Grinding Machine Starline CNC Profile Grinding Machine Surface Grinding Machine Hersteller [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Baujahr[construction year]: 10/2004 Weight [weight]: 6000kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Phone +49 17621834834

THCIKNESS PLANER model SCM S 630 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 20 motorized table positioning with electronic reading pneumatic roller pressure n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50

Crane remote control, crane control, crane control, pendant control, control switch, control bottle, empty housing for pendant control -Manufacturer: Schneider Electric, empty housing for pendant push buttons -Type: XACA08 or similar, exact type designation missing -Dimensions: 560/80/H52 mm -Weight: 0.6 kg

Horizontal universal balancing machine manufactured in 2004. This SCHENCK HM 70U BU features a maximum workpiece weight of 50,000 kg and a maximum workpiece length of 15,000 mm. It includes a control unit with CAB 920 software and a total power requirement of 75 kW. If you are looking to get high-quality balancing capabilities, consider the SCHENCK HM 70U BU machine we have for sale. Contact us for further details.

AUTOMATIC MULTI RIP SAW model SCM M2 second hand machine carpet with integral cast iron elements in good condition general condition of the machine: Excellent laser pointer for cutting line reference automatic lubrication system CE mark : Yes instruction booklet: YES . in Italian language technical details : carpet width mm. 220 max.height of cut mm.120 max.working width mm.200 minimum length of cut mm.290 max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 25 ( Kw 18,5 ) feed motor power Hp 1,5 ( Kw 1,1 ) arbor speed rpm 3600 variable carpet advancement speed. from 6 to 48 mt./min. net weight kgs. 1600 volt. 380/50

Rotofeeder end feeding system Fleetwood type: FSI including transport system from magazin to the Ferrum can seamer distance way approx. 2.800 mm complete reconditioned and fixed for can ends 202 including PLC Siemens S7

Machine Type: Aluminum Saw Manufacturer: Emmegi Type: 550 SCA Year of Make: 1996 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference M-EME-0724 DESCRIPTION We offer you a used aluminum saw from the manufacturer Emmegi. Saw blade stutters up, hence the special price. Saw drive runs clean and quiet Digital angle display New minimum quantity lubrication from Menzel from 2022 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Edgebander manufactured in 2017. This SCM Olimpic K360 T-ER1 features a feed speed of 11 m/min and accommodates edge thicknesses from 0.4 to 6 mm. It includes a pre-milling unit with counter-rotating diamond heads, an EVA glue unit, and a buffing unit. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K360 T-ER1 machine we have for sale. Contact us for further details.

Roller Conveyor / Conveyor / Roller - Gravity Schunk 16.7 meters Year of Make: 2013 Manufacturer: Schunk Model/ Type: Gravity Condition: used Total length: approx. 16700mm Total width: approx. 340 mm Roller/conveyor width: approx. 290 mm Roller diameter: approx. 40 mm Roller/center distance: approx. 50 mm Roller material: made of plastic Facility consists of: 3 x segments: approx. 4400 mm length 1 x segment: approx. 3500 mm length Frame: approx. 60 mm high, 20 mm wide Material: steel, galvanized Feet to be ordered separately, height adjustable Stock; 16.7 meters Price per meter The conveyor technology ran until dismantling. Internal Article Number: 2026071901 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are you ...

We have a complete game SCHNEIDER ELECTRIC BRAND 3 QM/ 2 IM/ 1 CM/ DM2 First commissioning 2017 Next interview 2026

Digital Programs TSC, Colour Display, Chromed Air Table, Chromed Side Air Tables, Light Bariers, Standard Accessories