sc 43 used for sale

Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction blower, fan, extraction, chip blower -Drive: 0.37 kW -Connection: Ø 100 mm -Connection: 380 V -Dimensions: 400/600/H1200 mm -Weight: 31 kg

Shelf system 2-storey Manufacturer: SSI Schaefer R7000 total height: approx. 5.700mm Depth: approx. 600mm Width: approx. 800mm per field Total area approx. 31.8 x 15.5m 358/340 fields on two levels The entire system is equipped with 5-7 shelves per field Load capacity approx. 250 Compartment dividers available on request Two stairwells with stair width approx. 1m Clothes rails can be offered as an option. Plant is in very good condition.

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 -5-100 s Price: per piece -Quantity: 5 available -Weight: 0.2 kg

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Bainmarie, Warming basin Scholl H1210, 2 separate basins for 1/1GN each, Connection 230V, 2kW, dimensions LxWxH approx. 80x63x33cm, weight approx. 30kg, good used condition, fully functional, new price is approx. 1.600,-€

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

Glass silk nickel stranded wire, cable stranded wire -Type: 1.5 mm² -Wire: 1 -Length: 100 m -Weight: 2 kg

Limit switch, button, safety switch, position switch, safety switch, safety limit switch -Manufacturer: Schmersal, position switch unused OVP -Type: MD 441-11y-M20 -Number: 1x switch available -Price: per piece -Carton dimensions: 160/105/H115 mm -Weight: 1.8 kg/piece

Converter, power supply, power supply unit, switching power supply unit, power supply unit -Manufacturer: Siemens Schroff, power supply switching power supply -Type: Siemens 805 Schroff SC 8030 -Technical data: see nameplate photos -Dimensions: 290/135 / H65 mm -Weight: 1.9 kg

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Control card, controller, PLC controller, optical card, optical control card, optical interface -Manufacturer: Dr. Schenk Industriemesstechnik, Optical Control Card -Type: XVP2, Optical 4160631 -Box dimensions: 280/200/H50 mm -Weight: 0.8 kg

Rotary table, rotary indexing table, dividing head, dividing head -Round table: swiveling, with four-jaw chuck -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm -Weight: 12.8 kg

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Enveloping feeder Schneider SF 80; shed feeder; good condition; cleaned and tested; Format max.360x360mm, min.100x100mm; .max. Speed. 15000/hr; height adjustable; with delivery conveyor A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; with delivery belt A20.

Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

ship propeller, propeller -ship propeller: Propeller, material bronze -Condition: refurbished condition -Outer diameter: 1520 mm -Height: 410 mm -Conical bore size: Ø101/123 mm -Weight: 333 kg

Chain mortiser, chain cutter, lock case cutter, lock case mortiser -Manufacturer: Festo, chain mortiser type PP on transport frame -Motor power: 1.6 kW -Connection: 380 volts -Accessories: incl. see photo -Total dimensions: 800/700/H1600 mm -Weight: 232 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm -Weight: 25 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 300 mm -Round steel: up to approx. 17 mm -Overall dimensions: 500/145/H1325 mm -Transport dimensions: 1000/145/H450 mm -Weight: 38 kg

HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA Schüco, Sunny Boy Photovoltaic Inverter -Type: SB 3300 -PAC nom: 3300 W -Dimensions: 440/360/240 mm -Weight: 42 kg

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M20 700 kg -Sizes/number: M20 x 65 to M20 x 160, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 700 kg

Propeller mixer Manufacturer: SCABA Type: 30 VA Power: 0.75 kW in EEx Protection very good condition LWH: 350 x 350 x 2200 mm

Screws, hexagon head screws, socket head cap screws, Allen head screws -Hex bolts: M24 approx. 600 kg -Sizes/Quantity: M24 x 70 to M20 x 120, see photo parts list -Grade: 8.8 black or galvanized -Manufacturer: various -Price/Sale: complete -Total weight: 617 kg

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 18 - 110 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scale shows signs of wear. The scales are not calibrated! The scale only needs to be placed on the floor and be aligned. The scale includes a ramp around to drive them with a pallet truck.

Screws, hexagon screws, flange nuts, hex nuts, collar nuts -Hex nuts: M8 to M30 645 kg -Sizes/Quantity: see photo parts list Price: complete Total weight: 645 kg

Gebr. Gantry crane 3.0to. Lifting height approx. 5m, track width 9510mm

I sell a fully equipped edge banding machine SCM Olimpic S3000, built in 2011: Configuration: Input stop servo motor adjustable Pneumatically adjustable joint milling machines Edge banding with preheating tank Material pressure zone servo motor adjustable Cross-cut saws pneumatically adjustable Strong milling machines can be adjusted manually Pneumatically adjustable radius milling top + bottom Round unit 4-motor pneumatically adjustable Radius puller blade R2 can be switched off pneumatically Surface of the drawing blade Polishing brushes Hot-air blower Separator injection front and rear STARTOUCH control system Control panel Barcode reader Working height servo motor adjustable Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 12m/min. PUR glue possible. Second glue tank brand new included. Only 6,153 meters glued! Machine practically ...

Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm

electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA3280M-BB051-Z -Power: 90 kW -Speed: 1475 rpm -Shaft: Ø 75 x 140 mm -Design: B5 -Protection class: IP 54 -Dimensions: 1050/700/H550 mm -Weight: 692 kg

MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

Exterior mirrors, exterior mirrors, mirror housing mirror bracket -Manufacturer: Scania, mirror housing, mirror bracket repaired / prepared for painting -Type: 590657 -Dimension: 1640/640/H210 mm -Weight: 8 kg

windshield, windshield -Manufacturer: Scania, windshield windshield -Order No.: 02581 99-003 -Dimension: 1660/705/ thickness 7 mm -Weight: 16kg -Transport dimension: 1660/785/H390 mm

Radiator, intercooler, intercooler -Manufacturer: Scania, radiator intercooler -Order No.: 1430718 -Transport dimension: 1010/990/H105 mm -Weight: 20 kg

Schrumpftunnel, Fabr. Olsberger