127,864 used machines on RESALE, but how to find them? Machine Search
2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling
Scholz Steam Autoclave Year 1979 7 bar pressure Internal dims: 1.5m diam. x 2.6mm long Temperature 150deg C 10 x steam connectors Indirect steam Full rail system Machine overhauled 2016/17 Full safety certification available Complete with control panel
Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050
Chamber filter press SCHENK with pressure via hydraulic with motor Type: KFP 620/ 30H No.: 352 Year of construction: 1979 Working pressure: 12 bar Measurements and Weight: Height: 1950 mm Length: 2900 mm Width: 1100 mm Weight: kg Filter plates: 20 x filter plates 600 x 600 mm Depth: 550 mm 2 x filter plates Depth: 850 mm
Key data: 300 , 4
Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: grey INP profile: 80 x 42 mm Truss type: TRV1-210-08-l Agraffe: 5 HK (hook) Clear width: 2,100 mm max. load per pair of trusses 2,400 kg, with the same weight. Distributed Load 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Type: ZHF-S15 Year of construction: 1975 Fabr.No. 1013 Boiler No. 1368GW Boiler: Content: 880 Liter permissible operating pressure: 6 bar permissible operating temperature: 100 °C Capacity: aproxx. 6000 liters/ depending on product Boiler room: 24 segment brackets: 20 Type: M23K 4571 Measurements: Height: approx. 2700 mm Length: 3800 mm Width: 2130 mm All the equipment s. photos
Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request
Sheet filter, plate filter SEITZ with hydraulic pressure via motor with deflection plate for step filtration used – in very good condition Type: 60B150 No.: 80036 Year of construction: 1984 Measurements and Weight: Height: 1210 mm Length: 4900 mm Width: 810 mm Weight: kg Filter plates: 146 x filter plates and 4 x stainless steel-endplates 600 x 600 mm Depth: 10 mm
Technical data for the crate rack: Shelving system: SSI Schaefer Type: R3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,056 mm Number of shelves / row of shelves: 01 pcs. á 994 mm Number of levels plus floor level: 07 pcs. The scope of delivery includes: 02x Shelf Stand, Choice II Material colour: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. transverse and diagonal struts The stands are unassembled 1,534 mm high 300 mm deep 07x shelves, second choice Material colour: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / piece: approx. 2.64 kg max. load per floor at Evenly distributed load: 100 kg 01x Cross Association, Second Choice Type designation: KV31013 Material colour: sendzimir galvanized ...
To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails
Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...
Layers of filter plate filter SEITZ with hydraulic pressure motor Type. 60B 100 SEITZ OF ONLY NOLL Serial No.: 80035 Year of construction: 1984 The dimensions and weight: Height: 1220 mm Length: 4050 mm Width: 830 mm Weight: kg filter plates: 99 x filter plates & 2 x end plates made of stainless steel approx. 600 x 600 mm thickness: 10 mm
Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes
8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves
approx. 2,700 longitudinal bracing, for longitudinal bracing as an alternative to cross bracing, LV 3134 for span length 1,282mm – used - : Price per piece ex site: only 4.- € (net)! 4 pieces are needed per field! Manufacturer: SSI Schaefer Type: LV 3134 Year of construction: 2021 Field length 1,282mm Shelf height 40mm Original price per piece: approx. 12.-€ (net) Longitudinal braces Sheet steel, painted light silver. For longitudinal bracing as an alternative to cross bracing, if cross braces in the double rack interfere with storage or if both sides are to be operated in the single rack. In order to ensure subsequent height adjustability, the frame distance for double racks must be at least 30 mm. In each shelf space of a rack row, the lower and upper shelves are to be provided with 2 longitudinal supports (for shelf heights up to 2967 mm). The form-fittin ...
CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KM: 95136 YEAR: NOVEMBER 2004 COMPLETELY REPAINTED (PROFESSIONALLY) CONDITIONS: EQUAL TO THE NEW
Technical data Spindle dia 125mm ISA 50 taper stroke of the spindle 800 mm cross travel of table X 1200 mm vert. travel of headstock Y 1400 mm longit. ztravel of the table Z 1620 mm spindle speed infinitely variable 3,5-700 rpm table size 1200 x 1400 mm table load 6000 kg main motor DC 19 kw total input 22,79 kW spindle feed inf. variable 0 - 1,25 mm/rot working feeds inf. variable 0,3 - 1700 mm/min rapid traverse 2250 mm/min fine feed 3mm/min dimension LxWxH 7,4 x 4,8 x 3,6 m weight of the machine 21000 kg DRO Heidenhain
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.
Compressor Bitzer CSH8571-140Y-40P
used
Concentrate plant 6000 l /h 3 stage system with plate heat exchanger For malt extract and apple juice concentrate
SCHLEUNIGER WireTwister 3300 AD wire twisting machine built in 2016 in China offers unparalleled twisting performance, thanks to the use of high-quality components and high-tech solutions. The machine, designed for the production of twisted pair cables, is also very simple and convenient to use. The ends of the untwisted wires are simply loaded into the holders and the twisting head respectively. The SCHLEUNIGER wire twisting machine pulls the wire very accurately to the programmed position, after which the head twists the wires with programmable tension control. At the end of the process, the holders automatically eject the twisted pair into the integrated storing channel and the taker returns to its initial position. The SCHLEUNIGER WireTwister 3300 AD wire harness machine is brand new and originally packaged. The photos and video shown in the offer are for reference – they repres ...
Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request
SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR
48 m Pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 4.650,-- net from stock Offer consists of: + 14 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 78 racks, length 3.6 m, 4000 kg ballast/compartment +156 pcs. Suspension locks + 56 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)
Case rounding machine Schmedt Model Prärund HHS17-45 Year 1989 Size 450 mm working width and spine width up to 100 mm Available direct
Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions
Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003
Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)
100 m shelf rack Schäfer R3000 incl. dividers Used goods, very good condition, see pictures Height 2.3 m Depth 50 cm Grid length 994 m Load capacity/compartment 100 kg Negotiation price: € 8,350,-- net from stock Offer consists of: + 101 pcs frame pre-assembled, approx. 2.3 m high, 50 cm deep + 400 floors, 500 mm deep, 994 mm long, 100 kg additional load + 30 cross bandages for 994mm floors +1200 pcs dividers for 500 mm shelves Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Cutting table with cutting rollers Bandwidth 60 cm Dimensions: Height: 105 cm Width: 350 cm Depth: 65 cm
High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.
Centric tensioner, very precise & stable design +/- 0.01mm, with or without middle jaw for 2-part voltage.
Multi-clamp , high-precision multi-clamp rail ground +/- 0.01mm, width 50, 72 and 100 mm. Directly from the manufacturer from Austria and inexpensive.
Swivel cube table for radial drilling machines Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!
Thermo Scientific Wellwash Microplate Washer Description Wash 96-well plates reliably with the Thermo Scientific Wellwash, an easy-to-use and reliable microplate washer for routine ELISA applications. The washer is equipped with a graphical user interface, different language versions and a USB port for optimal ease of use and excellent convenience. Characteristics: Large, clear color display and keypad ensure ease of use User interface is logical and intuitive and enables fast protocol programming Easy-to-use software requires minimal training and ensures a quick start Pressure-free bottles are safe to use Liquid level sensors in washing and waste bottles ensure safe throughput Automatic pre-rinse function ensures safe performance Aerosol cover prevents the escape of aerosols of infectious material Plate sensor detects whether a plate is present or not Wellwash is used to ...
Vessel for Melting Manufacturer BINDER 2000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. TÜV-certificate available (from 2008)!
maximum number of results exceeded
please refine your search
