sc 43 used for sale

32 pieces of railing posts for the Ringer Master scaffolding bracket 120, galvanized, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000587 Auction-ID: A1-46973-418

Consisting of: a.o. Approx. 4 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 1 solar frame Approx. 4 horizontal struts 180 Approx. 6 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 Tower Protect 180 platforms, 2 of them with hatch Pack size approx. 2900x2200x700 mm Auction-ID: A1-47009-44

21 pieces Ringer Master scaffolding brackets 120, galvanized, without railing posts Factory number 704V11 Compatible with Doka Framax Item price SO000584 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-415

Ringer Master (compatible with Doka Framax) accessories, consisting of: 9 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000585 Auction-ID: A1-46973-416

Consisting of: a.o. Approx. 3 mounting frames/ 7 rungs Approx. 1 solar frame Approx. 9 railing frames Protect 180 Approx. 4 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 platforms platforms, 2 of them with hatch Approx. 4 rolls Approx. 1 basic profile for material lift Approx. 2 profiles long Approx. 1 profile short Approx. 1 material lift box Approx. 1 bracket for material lift incl. SELF-MADE pallet rack, pack size approx. 3000x1620x1500 mm Auction-ID: A1-47009-30

ca 1100 Case Plug Ø 9mm, NEW PRODUCT For staking out vertical frames suitable for Plettac, Rux, Layher,... List number by manufacturer: BIE00805 SO001382 Auction-ID: A1-46973-326

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approximately 5 Railing Frames Protect 180 Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 4 Tower Protect 180 platforms, 3 of which with hatch incl. pallet, pack size approx. 2300x1400x1200 mm Auction-ID: A1-47009-51

incl. charger and transport case Auction-ID: A1-47009-103

approx. 200 pieces of scaffolding normal couplings (fixed couplings) SO000141 Auction-ID: A1-46973-306

Consisting of: a.o. Approx. 4 triangular booms type B Approx. 2 horizontal struts 180 Circa 4 Diagonal brace 180 Approx. 1 solar frame Approx. 1 beam for material lift solar incl. pallet, pack size approx. 3000x1300x1200 mm Auction-ID: A1-47009-52

Lot consisting of 104 pieces of steel scaffolding tubes Ø48.3mm Nominal length 150 (between 1.5 and 1.99m long) SO000105 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-301

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 4 Tower Protect 180 platforms, 3 of which with hatch Approx. 1 material lift box incl. pallet, pack size approx. 3000x1400x800 mm Auction-ID: A1-47009-46

Lot consisting of 156 pieces of steel scaffolding tubes Ø48.3mm Nominal length 100 (between 1.0 and 1.49m long) SO000111 Auction-ID: A1-46973-302

incl. charger and transport case Auction-ID: A1-47009-86

Schaffer Equipped with double working hydraulic circuit Hydraulic quick coupler Battery key Front / rear / arm - led work lamps Rear plug for trailer Rear tyres filled with glycol Well maintained ! Auction-ID: A3-43539-19216

incl. quiet speed colposcope Auction-ID: A7-47030-161

25 pieces of railing posts for the Ringer Master scaffolding bracket 120, ungalvanized, raw, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000586 Auction-ID: A1-46973-417

approx. 130 pieces of scaffolding normal couplings (fixed couplings) Item price so000140 Auction-ID: A1-46973-305

approx. 30 pieces Müba Bracket Scaffold Hook-in Shoes, Hook-in Pockets, galvanised SO001039 Auction-ID: A1-46973-318

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

Swivel Mandrel + Holder OD 105 Application For quick comparison measurement of bores during series inspection. Due to the looped sleeve with a small undersize, the mandrel is drilled into the hole. guided and centered. Execution - Measuring contacts and measuring needle made of carbide (wear-resistant) - Measuring mandrel from Ø 130 mm can be supplied as a cross sleeve or skid-cross sleeve - Standard version Advantage - Easy to use - Minimal measurement time - Maximum measurement reliability - Robust and reliable - Matched to the desired bore diameter + tolerance

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New

The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool incl. saw blade HSS 250x2,0x32mm, 128 T/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5)

Manufacturer: VEB Pressenwerk Morgenröthe Type: PSHZ 40 Name: Screw press / balancing press (manual) Description: Manually operated screw press (balancing press) in solid cast construction from industrial production. The press works purely mechanically via spindle and hand lever, without hydraulics or electrical components. Suitable for pressing, straightening, assembly and joining operations in the workshop, maintenance and manufacturing. Robust and durable construction from GDR production. Scope of delivery: – Screw press as shown – Press table / support – Press type: Screw press / balancing press – Operation: manual – Size: 40 – Press force: Size 40 (according to experience, corresponds to approx. 40 t press force) – Maximum installation height: 460 mm – Total weight: 1650 kg Dimensions: – Width: 1800 mm – Depth: 1800 mm – Height: 2350 mm Weight: 1650 kg

"The Schaublin 102 VM mechanical lathe is a high-precision machine tool designed for machining operations, especially the turning of metal parts. Manufactured by the Swiss brand Schaublin, known for the quality and reliability of its equipment, this model is particularly popular in precision mechanics workshops, laboratories and demanding production environments. Offered as is, it is an excellent opportunity for professionals wishing to acquire a robust machine to be put back into service or optimized. With dimensions of 200 cm in length, 77 cm in width and 155 cm in height, this lathe offers a comfortable workspace while remaining suitable for a standard workshop. Its weight of 400 kg guarantees high stability, which is essential to ensure optimal machining quality and limit vibrations. The Schaublin 102 VM is therefore a reliable and high-performance solution for turning jobs that requ ...

" Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine type: Multi-sensor coordinate measuring machine (optical / tactile) • Year of manufacture: 2006 • Serial number: 06-00376 Condition • Used, well-maintained overall condition • Machine was in measurement operation until the end • Regular calibrations documented • No obvious damage to granite, guides or measuring system Accessories / Scope of Delivery • Granite machine with measuring glass and cover • CNC control with scope controller • Renishaw pushbutton (several probe inserts available) • PC workstation with: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and test protocols • Folder with machine and measuring room documentation • Software and calibration data carrier (CD/DV ...

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation