sc 33 used for sale

Type: Gas Insulated Switchgear (GIS), SF6 insulated Configuration: 4 panels (Incoming Feeder, Voltage Measurement, Bus Coupler, Outgoing Feeder) Rated voltage: 24 kV Rated current: 400 A (feeder & coupler panels) Short-time withstand current: 12.5 kA / 1s Breaking capacity: 31.5 kA Frequency: 50 Hz Standard: IEC 62271-200 Manufacturer: Schneider Electric / Areva Year of manufacture: 2007 Condition: Used, in good working order

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

Pellet sifter Screening Machine Screening Technology Brand: VAV Scan Vibro Screen area : 800 x 1300mm - 1 decker Drive: 1.37 kW electric motor

A plastic laser sintering unit is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. An on-site inspection is possible.

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

NEW, width 220 cm, 266 kg dead weight, 0.75 m³ capacity, with JCB Q fit mount

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW

NEW, width 200 cm, 250 kg dead weight, 0.70 m³ capacity, with Merlo attachment

NEW, 120 cm long tines, 2 t load capacity, with Terex attachment (81 cm attachment width, 433 mm attachment height, top 35 mm, bottom 35 mm)

1.05 m width, with Weidemann mount

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW, Width: 240 cm, Capacity: 0.82 m³, Weight: 284 kg, with Manitou mount

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

BIG SUN heavy-duty bucket 210 cm with Hardox cutting edge, - with Liebherr 506 recording

General SKU269X297 MakeKillion TypeKL-075 No.19707 Year of construction1995 Mounted on frameOn wheels Main Features Motor1.1 KW Inlet diameter35 mm L/D26 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter19,1 L/D26 Number of heating zones:3 Electric heating18,4 KVA, 380 volt, DC-motor1,1 kW, 380 volt Screw speed12-120 rpm InletDia. 35 mm Feeding with hoppercheck Number of temperature controllers:3 MaterialStainless steel General LocationBarneveld With switchgearcheck Floorspace1,10x0,90 m Total height1,50 m Weight300 kg CEcheck Extra Specificationsextruder comes with:Thermo Prism TSE systemsnr: 5265.year: 2002Single screw extrudersGeneric medicinesStarchAgrochemicalsDetergent & surf.CosmeticsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPowdered foodsKillionExtruders > ...

Gyratory Vibrating Screen . Deck L x W: 3.000 x 2.000mm. 4 Decks. With 3KW SEW E.Motor and Unused spare-outlet

General SKU231U203 LocationBarneveld CEcheck MakeLeistritz Main Features Motor52 KW Inlet diameter49.7 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D40 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm MaterialNitriding Steel 1.8550 General TypeSZE-50 GL Mach.No.94.91.2168/7 Year of construction1994 Sizes switchgear(as is) Floorspace4,26x0,80 m Total height1,9 m Weight2000 Extra information power cabinet dimention: 2,26x0,62x2,2 m Gleichlauf GL Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is  ...

turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1950x690x1700 mm Weight: 431 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1950x690x1700 mm Weight: 426 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic

ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears

General SKU400X1196 LocationBarneveld CEcheck Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump PumpProgressive cavity pump / eccentric screw pump Number of pumps:1 Capacity0.50–5 m³/h With motor1,5 kW 400 V 1500 rpm (Pump speed: 30–190 rpm) With frequency inverter(as is) InletDN65 OutletDN65 Eccentric Screw Pumps MaterialStainless steel 1.4404, Stainless steel 1.4571 (316Ti) General MakeSeepex TypeBCSO 10-6L /J0-A7-A7-Q1-G66-X Mach.No.198504 Floorspace1,35 x 0,20 m Total height0,25 m Weight75 kgEccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsSeepexPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustri ...

General SKU379X944 MakeCollin Type20x20 D No.32000892 Year of construction1992 LocationBarneveld Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel General With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt&:nbsp:Single screw extrudersGeneric medicinesStarchAgrochemicalsDetergent & surf.CosmeticsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPowdered foodsCollinExtruders > Single screw extrudersIndustries > Pharmaceutical > Generic medicinesI ...

General SKU221Y083 LocationBarneveld Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Eccentric Screw Pumps MaterialStainless steel General MakeNetzsch SerialD4095257/6300005469/0100 Year of construction2021Eccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsNetzschPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Ind ...

Manufacturer: Horstmann Year of Manufacture: 2005 Decommissioned : 2010 Type of Machine : Drum Screen Total Transport Weight : 33,000 kg (33 t) Technical data : - Diameter: 2450 mm - Length: 10920 mm - Screening length: 9090 mm - Square perforation: 60 x 60 mm - 2 x SEW geared motors Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dimensions (L/W/H): 1950x690x1700 mm Weight: 451 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

scoring circular saw blade, scoring circular saw blades, HW scoring saw -Manufacturer: Schäffer, Vorritz circular saw blades HW-Vorritzer 2-part, adjustable -Type: 120 x 2.8-3.6 x22Z=2x12 -Number: 9x scoring saws available -Price: per piece -Dimensions box: 225/220/H10 mm -Weight: 0.3 kg/piece

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Easy Panel PC, Performance 18.5 -Type: HMIPSPS952D1X01 -Voltage: DC 12-24V -Dimensions: 470/55/H295 mm -Weight: 4.5 kg

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Panel with Housing -Type: HMISTO715 -Voltage: DC 12-24V -Number: 2x panels available -Price: per piece -Dimensions: 150/145/H160 mm -Weight: 1.4 kg/pc.

BIG SUN Swivel dump bucket 240 cm with Merlo ZM2 mount, - Net weight: approx. 351 kg, - Volume: 1.01 m3

SML heavy-duty dump bucket 240cm with Merlo ZM2 mount, - Net weight: approx. 443 kg, - Volume: 1.56 m3

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, for PE PP ABS PC PS, compounds, masterbatches, Average throughput rate 600 kg/h depending on material and feeding rate, 2 spare screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz (possible replacement with a.c.motor), non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The ...

Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ROTATING SCREEN, construction in Aisi304 stainless steel, previously working on a 160 mm extrusion line, stainless steel screen with 17 mm holes, 2 exits for lumps and good materials, 0,25 kw motor, Bonfiglioli gearbox, loading hopper 305 x 505 mm., excellent conditions, installed power - used power in work: about 60-65% : 0,25 kw, availability: immediate, conditions: excellent

With 31 plastic plates and sealings, completted with fittings and displays 2 stainless steel end plates and manual pressing. Available approx. April 2018 Plates maximum: 60 Plate formats: 600x600 dimension ca. 270x80x150 cm Distance between first plate and spindle approx ca. 100cm

Karton Former for Karton Sheets 6x0.7l inside

General SKU321S566 MakeWLS Gabler (D), :Pressquick PQ 12: TypeE-60/10 D No.12355 Year of constructionUnknown LocationBarneveld Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel With jacketcheck General With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications:Without die plateSingle screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU284Y448 LocationBarneveld MakeVan Wijk &: Boerma Main Features MaterialStainless steel Volume360 Ltr. Motor0.37 KW Specified Features - Eccentric Screw Pump Capacity360 l/h With motor0,37 kW 230/400 V Inlet2x ø 23 mm Outletø 6 mm Eccentric Screw Pumps MaterialStainless steel 1.4552 General TypeNM011BH02S12F Mach.No.218768 Floorspace0,2 x 0,8 m Total height0,25 m Weight50 Extra SpecificationsInternal SKU U421Eccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsVan Wijk & BoermaPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > ...

General SKU284Y450 LocationBarneveld MakeVan Wijk &: Boerma Main Features MaterialStainless steel Motor0.37 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor± 0,37—1,1 kW Inletø 23 mm Outletø 23 mm Eccentric Screw Pumps MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Type2NL 15A Mach.No.241596 Year of construction1992 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,5 x 0,5 m Total height0,75 m Weight60 kg Extra SpecificationsInternal SKU U490Eccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsVan Wijk & BoermaPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > C ...

suitable for 5 t excavator