sc 33 used for sale

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

horizontal stainless steel tank, double-walled, insulated, oval, with feet Volume: 5.2 m³ Dimensions: Ø 2.05 m wide × 2.80 m long x 1.80 m high incl. feet

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 240 x 4 mm -Handover in its current condition as inspected -Dimensions: 400/150/H1200 mm -Weight: 46 kg

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

horizontal stainless steel tank, oval, with feet Volume: 2.3 m³ Dimensions: 0.70 m wide x 2.30 m long x 1.50 m high and 0.20 m high feet, total height 1.70 m

Pump, centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Flow rate: 19.4 l/min -Delivery head: 7 bar -Speed: 1400 rpm -Motor power: 0.55 kW -Dimensions: 600/260/H260 mm -Weight: 36 kg

Servo motor, electric motor, DC motor -Speed: 67 rpm -Power: 8.9 Nm -Voltage: 24 V DC -Design: B5 -Shaft diameter: Ø 10 mm -Dimensions: 170/67/H67 mm -Weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -4 sentence: hard cheeks -7 sentence: soft cheeks -With ground groove and pointed tooth pitch: 1.5 mm -Price: complete -Weight: 6 kg

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Limit switches, push buttons, safety switches, position switches -Type: ZR332-11y-1338 -Price: per piece -Quantity: 4x Available -Weight: 0.5 kg

Compressor control, compressor control, base load switching circuit -Compressor control: for circuits with multiple compressors -Handover in its current condition as inspected -Dimensions: 220/320/H140 mm -Weight: 4 kg

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

large working width: 2040 mm for iron sheets up to approx.: 1 mm Dimensions: 2650 x 650 x 1180 mm Weight: approx. 680 kg

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Safety switch, TZ -Type: AZM 415-22zpk -24 VDC -Protection class: IP 67 -Quantity: 5 available Price: per piece -Weight per package: 1 kg

Relays, time relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -T: 1.5-30 sec -U: AC/DC 24 V 50-60 Hz Price: per package -Quantity: 7x Available -Weight: 0.2 kg

Three-phase motor, electric motor -Power: 160 kW -Speed: 2960 rpm -Voltage: 500 V (delta) -Protection class: IP 23 -Design: B3-B5 -Shaft: Ø 70 mm -see photo nameplate for further details -Weight: 830 kg

1 used pallet rack; Make: SSi-Schäfer Type: PR600 Year of construction: 2010 Longitudinal truss rack Max. Field Load: -approx. 529 pieces of stand frame Frame height: approx. 10,300 mm Frame depth: 1,100 mm; profile: P120 / 100 / 2-3, galvanized - approx. 5,544 trusses; Truss length:3,700 mm Profile CE 160/50; galvanized Structure can be individually designed. Reserved for intermediaries Disassembled plant is located in our warehouse in Eitorf Transport and assembly can be offered separately. You are welcome to view the material in advance. Price on request!

Key data: 630 mm, 240 mm, 7 kW

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

horizontal steel tank with very good inner coating (epoxy resin), food coating Volume: 45,000 l Dimensions: Ø 2.80 m × 7.70 m long Weight: 6.3 tons

Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2,5 EW20° 2GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2,5 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2.25 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 220 mm -Number: 2 milling cutters Price: complete -Weight: 14 kg

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 16 mm -Usable length: 20 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 4 kg

Radius cutter, finger cutter, end mill, milling cutter -Six-cutter -Finish cutter -Shaft: Ø 25 mm -Diameter: 32 mm -Usable length: 70 mm -Angle: 60° -Type: HSS -Quantity: 4 pieces -Sale/Price: complete -Weight: 4 kg

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M1.5 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2,5 EW20° 5GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M1.5 EW20° 4GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2 EW15° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

Grinding drum, deflection drum, belt grinding machine, belt sander -Drum is for a husband grinder -Drum width: 170 mm -Drum: Ø 200 mm -Eccentric adjustment with touch clock -Number: 2x drums available -Price: per piece -Dimensions: 200/290/H280 mm -Weight: 13 kg

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

Schindler DR VCB 025 Biodyn 25 C BR Frequency Inverter  Schindler  DR VCB 025  Biodyn 25 C BR ID.No. 59400893 Frequency Input 3AC 340...460V 50/60Hz IC1CS (400V): 21A Output 3A 0...400V 0...65Hz IC2CS: 25.5A IC2N: 21A More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

LISTING ID: 22749 Brand: SCANIA Model: DI12 59M Power: 221 kW(300 pk) 1800 rpm Displacement: 11.7 L Bore x Stroke: 127 x 154 mm Dry Eight: 1130 kg

Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: GHUZ050E13A0 -Connection: 24 VDC -Stroke: 20 mm Price: per piece -Quantity: 3 available -Weight: 1.6 kg

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3 EW20° 4GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight|pcs.: approx. 8,12 kg max. load per shelf 75 kg, with the same load. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.