sc 22 used for sale

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Speed potentiometer 2 drawers

Price per piece! Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 140 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 4,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. B2xwaxdlj8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf in ...

Air-wifer with approx. 3750 m3 throughput / h

Price per piece! Currently in stock: approx. 51 pcs. Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 110 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 3,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed S ...

Curve lathe SCHWERDTFEGER UA20 - see picture

2 stueck fraesmaschinen SCHAFFNER F.17.34, table 750 / 180, with double vertical freskopf Further: 2 piece SCHAFFNER 17.3 also horizontal

Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!

We offer you a railing post from SSI Shepherd for sale. Included in delivery are: 01x railing posts, second choice Material color: Ral 7001 Silver Gray Manufacturer: SSI Schäfer Total height: approx. 1.130mm Total width: approx. 32 mm Total depth: approx. 55 mm Base plate: 120 x 80 x 15 ( W x D x H) Diameter round tube opening: approx. 35 mm Distance of holes: 500 mm ( center hole ) Material thickness: approx. 3 mm Weight pcs.: approx. 3,64 Kg Notes: - The railing post is open from above. If desired, you can get matching plastic caps. - The heights of the round tube openings are: 575 mm and 1,075 mm ( Measured from lower edge base plate to lower edge round tube opening ) - suitable for round tubes with a diameter of 34-35 mm - For fastening we recommend 4 screws M8 (8.8) - Slip-through opening must not be larger than 900 mm. - If the railing posts are drilled t ...

We offer you a railing post from SSI Shepherd for sale. Included in delivery are: 01x railing posts, second choice Material color: Ral 7001 Silver Gray Manufacturer: SSI Schäfer Total height: approx. 1.030mm Profile: 55 x 30 x 2.0 mm (D x W x S) Base plate: 120 x 80 x 15 (W x D x H) Diameter round tube opening: approx. 35 mm Distance of holes: 315 mm ( middle center hole ) Weight pcs.: approx. 3,37 Kg Notes: - The railing post is open from above. If desired, you can get matching plastic caps. - The heights of the round tube openings are: 345, 660 and 975 mm ( Measured from lower edge base plate to lower edge round tube opening ) - suitable for round tubes with a diameter of 34-35 mm - For fastening we recommend 4 screws M8 (8.8) - Slip-through opening must not be larger than 900 mm. - If the railing posts are drilled through a beam ( CS, C or IPE ), then no count ...

capacity: 250 EURO pallets / h Presently equipped for EURO pallets 1200 x 800 mm short side leading as well as for half pallets 600 x 800 mm. Pre-Treatment: Cleaning of the pallets through a rotating brush Inspections: Roller pressure check for deck and running boards for detection of missing or broken boards and the pressure resistance of the blocks Check of the pallet width, length and height Block scanning of the inner and outer blocks from both sides for completeness Edge zone check of the deck and running boards‘ outer edges from the top and the bottom for damages and dimensional accuracy Fork clearance Deflection and nail connection check Sorting of the checked pallets according to quality criterias (3 criterias: damaged pallets, usable pallets and pallets suitable for high rack storage) After-Treatment: Usable pallets and pallets suitable for  ...

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Due to relocation, we sell pallet racking manufacturer's SSI Schäfer. System PR300. Available with frame height 4950 mm and 7900 mm. Very stable plug-in system with IPE beams. 900 x pallet positions with technical capacity of 3000 kg / truss IPE profile 2700 mm. Plant already dismantled and immediately available Quantity: 100 x shelf fields consisting of 110 piece frame 4. 950x1050mm, green painted, welded truss, 400 pieces of truss IPE100 profile 2700x100x50mm, specialist capacity 3000 kg, incl. fittings Prices from site Kaarst, surplus quantities possible!

Due to relocation, we sell pallet racking manufacturer's SSI Schäfer. System PR300. Frame size 7. 900x1030mm / truss IPE80 1900 mm long. Very stable plug-in system with IPE beams. 1500 x pallet places / range 1.000 kg / truss IPE profile 1.900 mm. Plant already dismantled and immediately available Quantity: 150 x shelf fields consisting of 170 piece frame 7. 900x1030mm, welded frame, 1200 piece of truss IPE80 profile 1900x80x50mm,. Specialist load 2000 kg, incl. fittings Prices from site Kaarst, surplus quantities possible!

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Lord: Simon Blank We offer you a final stand increase for sale here. Included in delivery are: End stand riser, used Manufacturer: SSI Schäfer Type: PR 350/400 Total height: approx. 465 mm Height: approx. 400 mm Total width: approx. 80 mm For stand depth: approx. 1,050 mm Material thickness: approx. 4 mm Internal top-up tab: approx. 70 x 40 x 3 mm (TxWxS) Notes: - suitable for a frame profile width of U 80 mm and a stand depth of 1,050 mm - The final stand increase is attached to the existing shelf stand and then screwed. The shelf stand is raised by 400 mm. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which can be queried sep ...

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

The SCHIESS RF 30 gear hobbing machine is a specialist machine for machining large gear wheels. The machine is designed for machining of gears by processing individual pitches of a gear wheel. The milling machine processes a workpiece with diameter from 60 mm to 3500 mm and a weight of up to 25 t. The spindle of the milling machine rotates at a speed from 6 to 69 rpm. The SCHIESS RF 30 machine is designed for milling with: – cylindrical milling cutters in steel / cast iron up to module: 24/30 – disc milling cutters in steel / cast iron up to module: 33/42 – end mills in steel / cast iron up to module: 33/42 50/65 Technical data of the SCHIESS RF 30 milling machine - largest diameter of the milled workpiece: 3500 mm - llargest diameter of the milled workpiece in the circumferential method and with tooth pitch up to 45 3000 mm - lsmallest diameter of the milled part: 60 m ...

Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm

Included in delivery are: 01x roll strip, used Material color frame: sendz. galvanized Frame profile: approx. 40 x 27 mm (WxH) Material color rolls: yellow Total length: approx. 3,045 mm Total width: approx. 40 mm Roll width: approx. 24 mm Pitch: approx. 27 mm Total height: 38 mm Weight / pcs.: approx. 2.40 kg Technical data for the roll bar: Manufacturer: SSI Schäfer General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR ...

Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.

Included in delivery are: 01x Shelf, SECOND choice Material color: sendzimir galvanized Length: approx. 1,285 mm Depth: approx. 340 mm Height: approx. 30 mm Weight / pcs.: approx. 4.30 kg Technical data on the shelf: Manufacturer: SSI Schäfer Type: R1000 Type designation: ZB1351308V load per shelf 150 Kg at the same. distributed load General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shel ...

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!

Technical data Table length: 600 mm Table width: 210 mm Longitudinal travel (X-axis): 260 mm Transversal travel (y axis): 150 mm Vertical travel (z axis): 310 mm Distance from vertical spindle to table: 310 mm Distance from horizontal spindle to table: 410 mm Spindle speeds: stepless from: 58 rpm up to: 2000 rpm Taper in spindle: 30 ISO Feeds steps:: 10 longitudinal from: 12.0 mm/min up to: 400 mm/min vertical from: 12.0 mm/min up to: 400 mm/min Rapid traverse: longitudinal: 1.2 m/min vertical: 1.2 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 3.0 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1500 mm Width: 1100 mm Height: 1600 mm

Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Coolant system Lamp

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Spindle speeds: number (steps): 24 from: 58 rpm up to: 2900 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.7 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1500 mm Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive 3-jaw chuck diameter: 120 mm Set of collets: W 20 Set of centres Drill chuck Grinding attachment Fixed steady

Control: HEIDENHAIN TNC 135 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drilling tailstock Cross slide with 90 mm stroke

Key data: 630 Siemens, 3000 840 D

Grinding diameter: 630 mm Grinding length: 3000 mm Workpiece weight: 0 kg CNC Brand: Siemens CNC Model: 840 D CNC Dresser EMAG with Siemens 840D new in 2008 HeidenHain measuring scales Siemens Servo engines MARPOS E9 balancing system 0,2 Mu Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height:           316mm Grinding Ø:              632mm Grinding length:         3.000mm Grinding stone dimensions:800 x 305 x 105 mm Grinding stone speeds:   1000Rpm Table inclasement:       9,1 ° Length:                  10.100 mm  Width:                   2.610 mm  Height:            ...

Key data: 800 , 8000

Grinding diameter: 800 mm Grinding length: 8000 mm Workpiece weight: 0 kg incl. 8 x steady rest Max. workload 4000 Kg Power 22 kW Feed rate table 50 – 4500 mm/Min Speed range tail stock 8 – 48 U/Min Centre height:           425mm Grinding Ø:              800mm Grinding length:         8.000mm Grinding stone dimensions:1000 x 305 x 150 mm Grinding stone speeds:   800Rpm Table inclasement:       6,1 ° Tailstock:               6Mk Length:                  18.000 mm  Width:                   4.000 mm  Height:                  2.700 mm  We ...

Temperature range: -40C to +50C interior dimensions (usable space) A approx. 500 mm, width approx. 400 mm, depth approx. 800 mm

High capacity oil cooler, Schimpke prod., type DK68V / 50, 6200 kcal/per hour, oil Durchflus 36 - 51Ltr rpm installation _ compressor, fan, .uber filters extraction.

Type Z.32c Ser. Nr. 040306 Cutting length 3200 mm Cutting width 3200 mm Max. saw blade protection 80 mm Compressed air pressure 6 bar Main motor 7,5 kW Max. saw blade feed speed 13.5-27 m/min Air cushion tables 4 Scoring unit 1,5 kW Made in Italy Weight 2880 kg

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

SCM si x 32A Circular sawing machines Both sides saw blade tilting to 46° Be Mule shoe 1200 x 650 mm Saw table cast 1000 x 685 mm Carriage 3200 x 360 mm Format sections 3200 mm RIP fence cutting width 1270 mm Max cutting height + 90 °: 136 mm Max cutting height + 46 ° /-46 °: 97/60 mm Before scoring unit Motor 400V 50 Hz 7kW Main sawblade speed: 4000 1/m Dust nozzle diameter: 120 mm and 80 mm And switch on the carriage 2-ashes controlled height/Pan Programmable, electronic display G & PIECES 5508780 Optional carriage 2600 mm G & PIECES 5508775

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request

Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

metric thread: M 8 - M 52 pipe thread: 1/4 - 4 "spindle speeds: 15, 27 and 48 rpm operating voltage: 220V dimensions: 1050 x 650 x 1180 mm

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg